• Environmental and Resource Economics Review
• /
• v.31 no.3
• /
• pp.419-449
• /
• 2022

This paper aims to quantify the potential economic burdens of EU's carbon border adjustment mechanisms faced by Korean domestic industries. In addition, this study tries to compare and analyzes changes in the burden of each industry resulted from the implementation of the domestic low-carbon policy. Based on the quantitative findings, we intend to suggest policy implications for establishing mid- to long-term strategies in response to climate change risks. Based on the environmentally extended input-output analysis, the total economic burdens of the domestic industries due to the EU's carbon border adjustment mechanisms are estimated to be approximately KRW 8,245.6 billion in 2030. Looking at the impacts by industry, it is found that major industries such as petrochemicals, petroleum refining, transportation equipment, steel, automobiles, and electric/electronic equipment industries are expected to account for 84.3% of the total potential burdens. In addition, in multiple policy scenarios assuming technological developments and energy transition following the implementation of domestic low-carbon policies, the total economic burden of carbon border adjustment is expected to decrease by about 11.7% to 15.0%. The main result of this study suggests that we should not view EU EU's carbon border adjustment mechanism as a trade regulation, but to use it as a momentum for more effective implementation of the low-carbon and energy transition strategies in the global carbon neural era.

• Journal of Industrial Convergence
• /
• v.21 no.5
• /
• pp.1-13
• /
• 2023

Carbon neutrality is the concept of reducing greenhouse gases emitted by human activities and making actual emissions zero through removal of remaining gases. It is also called "Net-Zero" and "carbon zero". Korea has declared a "2050 Carbon Neutrality policy" to cope with the climate change crisis. Various carbon reduction legislative processes are underway. Since carbon neutrality requires changes in industrial technology, it is important to prepare a system for carbon zero. This paper aims to understand the status and trends of global carbon neutrality technology. Therefore, ROK's web platform "www.naver.com." was selected as the data collection scope. Korean online articles related to carbon neutrality were collected. Carbon neutrality technology trends were analyzed by future signal methodology and Word2Vec algorithm which is a neural network deep learning technology. As a result, technology advancement in the steel and petrochemical sectors, which are carbon over-release industries, was required. Investment feasibility in the electric vehicle sector and technology advancement were on the rise. It seems that the government's support for carbon neutrality and the creation of global technology infrastructure should be supported. In addition, it is urgent to cultivate human resources, and possible to confirm the need to prepare support policies for carbon neutrality.

• Korea Trade Review
• /
• v.43 no.5
• /
• pp.47-66
• /
• 2018

This study analyzes the potential economic effects of a trade war between the U.S. and China. The CGE model is used to estimate the macroeconomic variables of each country and the change in imports/exports by industry by considering three different scenarios: (i) the US imposes a 25% of tariff on China; (ii) the US and China impose a 25% tariff bilaterally; (iii) the United States expands protection in vehicles and metals to Korea, Japan, and the EU. According to the results of the study, when the US and China initiate a trade war, GDP and welfare of both countries decline. China's decline in GDP and welfare are larger than those of the United States, which implies a trade war is more favorable to the U.S. than to China. In the long run, China's GDP and welfare decline widens further. While the trade volumes of the US and China are greatly reduced, the trade volumes of other countries does not significantly fluctuate. Finally, if the US extends protection policy to Korea, Japan and the EU, it creates undesirable effects on the US. In particular, damage to the US jeopardizes its advantageous position in a trade war with China. In order to emphasize the unfairness of protectionist policy and the damage to Korean industry, Korea needs to establish a strategy to counter US protectionist policy.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.1
• /
• pp.71-77
• /
• 2023

With the continuous industrial development, not only natural resource depletion, waste generation, but also various weather conditions are becoming more frequent. Efforts are continuing to recycle industrial by-products to overcome the climate crisis and save resources. Slag is a representative by-product generated in the steel industry, and it is characterized by improving rutting resistance and moisture sensitivity by increasing strength and reducing deformation when used as a material for asphalt concrete. On the other hand, slag has expansion properties so it is used as a relatively low-value-added material such as embankment and refilling materials. In order to expand the application of slag, an experiment was conducted to evaluate the crack resistance of slag asphalt concrete pavement. As a result of the indirect tensile strength test, it was found that the asphalt mixture using slag aggregate showed a value 1.13 times higher than that of the general HMA with the same particle size, and the toughness was 1.17 units, improving crack resistance. In addition, it was found that the failure number of the 4-point beam fatigue experiment and the slag asphalt mixture was 20,409, which was more than doubled compared to the general HMA. Furthermore, Overlay Test showed a tensile load residual rate of 4 times or more, improving crack resistance to repeated fatigue. Accordingly, the use of slag aggregate will likely have various advantages in improving the performance of asphalt concrete pavement.

• Resources Recycling
• /
• v.32 no.6
• /
• pp.67-78
• /
• 2023

The rare metals used as raw materials in high-tech industries undergo changes in demand structures and supply chains following domestic industrial structural shifts and technological advancements, exhibiting high price volatility. Therefore, it is necessary to periodically analyze changes in the demand structures of rare metals. Since domestic demand for most rare metals relies on imports in Korea, the changes in domestic demand for rare metals can be identified by analyzing changes in their trade structure. In the present study, we analyze the changes in trade volume, trade growth rate, trade rankings, and trading countries from 2000 to 2022 for 35 rare metals, categorized into five types-ores, metals, alloys, compounds, and scrap. The trade of the raw materials of rare metals in Korea has generally increased since the 2000s, except for a significant decline in 2009 and 2016. The total trade volume, encompassing both exports and imports, has increased by approximately tenfold in 2022 compared to 2001. Until the mid-2010s, the trade of the raw materials of rare metals was primarily focused on those used in steel-manufacturing such as silicon, nickel, chrome, molybdenum, manganese, and others. However, after that period, there has been an increase in the trade of platinum group metals like palladium, rhodium, platinum, and the raw materials of rare metals for secondary battery-manufacturing such as lithium and cobalt. Particularly in 2022, lithium has become the largest share in trade of the raw materials of rare metals in Korea, due to the price surge and increase in demand.

• Resources Recycling
• /
• v.33 no.2
• /
• pp.54-61
• /
• 2024

When steel contaminated with Pb, produced by the decay of natural radionuclides, is remelted, Pb distributes among the metal, slag, and gas phases. In this study, 5 wt%Pb was added to Fe and melted with CaO-SiO₂-Al₂O₃-MgO slag to investigate Pb's distribution in the metal/slag/gas. As slag basicity ((wt%CaO)/(wt%SiO₂)) increased, Pb solubility in Fe slightly increased, while Pb in the slag tended to decrease. Consequently, the slag/metal distribution ratio of Pb decreased with increasing basicity. Thermodynamic calculations revealed that the slag/Fe phase distribution ratio of Pb remained very low irrespective of the activity coefficient of PbO in the slag, consistent with the experimental results. The calculated evaporation rate of Pb in Fe-Pb was approximately 22 times that of Fe; hence, most of the Pb evaporated into the gas phase.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.2
• /
• pp.69-76
• /
• 2015

BACKGROUND: Contamination of soils by heavy metals is the serious environmental problem. In particular, industrial processing is one of the main sources of heavy metal contamination. The objective of this study was to investigate the distribution characteristics of heavy metals in soils collected from industrial complex. METHODS AND RESULTS: In this study, the soil contamination and enrichment factor (EF) of heavy metals were investigated in three national industrial complexes such as Yeosu, Ulsan and Sihwa Banwal industrial complexes. The target heavy metals includes Cd, Cu, As, Hg, Pb, Cr, Zn, and Ni. The results showed that the contents of Cd, Hg, Pb, Zn and Ni in Yeosu and the contents of Cu, As and Cr in Sihwa Banwal were higher than in any other industrial complex. The results of principal component analysis(PCA) in Yeosu, Ulsan and Sihwa Banwal complex could be explained up to approximately 81.4, 69.1 and 70.9% by two factor, respectively. Enrichment factors of Cd, Pb and Zn in all the investigated industrial complexes were above 1.0 that was the value judged to be a high contamination. And EF of Cr was above 1.0 in Sihwa Banwal complex. EF of Zn in all sites was generally high from the other heavy metals. CONCLUSION: Therefore, soils maybe significantly affected by heavy metals (especially, Cd, Pb and Zn) present in the emissions from industrial complexes.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.104-110
• /
• 2015

It is known that polymer concretes are 8~10 times more expensive than ordinary Portland cement concretes; therefore, in the production of polymer concrete products, it is very important to reduce the amount of polymer binders used because this occupies the most of the production cost of polymer concretes. In order to develop a technology for the reduction of polymer binders, smooth and spherical aggregates were prepared by the atomizing technology using the oxidation process steel slag (electric arc furnace slag, EAFS) and the reduction process steel slag (ladle furnace slag, LFS) generated by steel industries. A reduction in the amount of polymer binders used was expected because of an improvement in the workability of polymer concretes as a result of the ball-bearing effect and maximum filling effect in case the polymer concrete was prepared using the smooth and spherical atomized steel slag instead of the calcium carbonate (filler) and river sand (fine aggregate) that were generally used in polymer concretes. To investigate physical properties of the polymer concrete, specimens of the polymer concrete were prepared with various proportions of polymer binder and replacement ratios of the atomized reduction process steel slag. The results showed that the compressive strengths of the specimens increased gradually along with the higher replacement ratios of the atomized steel slag, but the flexural strength showed a different maximum strength depending on the addition ratio of polymer binders. In the hot water resistance test, the compressive strength, flexural strength, bulk density, and average pore diameter decreased; but the total pore volume and porosity increased. It was found that the polymer concrete developed in this study was able to have a 19% reduction in the amount of polymer binders compared with that of the conventional product because of the remarkable improvement in the workability of polymer concretes using the spherical atomized oxidation steel slag and atomized reduction steel slag instead of the calcium carbonate and river sand.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.753-770
• /
• 2006

In urban areas, groundwater pollution is heavily affected by urbanization with land use types. This study aims to characterize groundwater quality and contamination in Sasang industrial area of Busan Metropolitan City where metalworking, machinery and footwear factories are located. Busan Metropolitan City is the highest in the utilization of groundwater resources among the metropolitan cities in Korea. $K^+,\;Na^+,\;Ca^{2+},\;Mg^{2+},\;Cl^-,\;SO_4^{2-}\;and\;HCO_3^-$ concentrations, and electrical conductivity (EC), total dissolved solids (TDS) and salinity are high in the areas near the Nakdong River. The results are attributed to the influence of salt water which intruded into the coastal sediments during sedimentation. In addition, the dominant chemical type of Ca-Cl indicates the influence of salt water in the geological formations as well as anthropogenic pollution. $SiO_2$ ion is interpreted to originate from both water-silicate mineral reactions and the decomposition of cement concretes. Trichloroethylene (TCE) was detected at 12 sites of total 18 sites. However, tetrachloroethylene (PCE) was detected at f sites and 1.1.1-trichloroethane (TCA) at 3 sites. According to the factor analysis, factor 1 was explained by 49.8%, factor 2 19.8%, and factor 3 11.0% with total 80.6% explanation. pH, TDS, salinity, $Ca^{2+},\;K^+,\;Mg^{2+},\;Na^+,\;Al^{3+},\;As^{3+},\;Cl^-\;and\;Fe^{2+}$ were positively highly loaded to factor 1. The chemical components loaded to factor 1 represent the chemical characteristics of both industrial pollution and influence by salt water. Based on the cluster analysis and distribution pattern of chemical components, the concentration of $Na^+,\;Ca^{2+},\;Cl^-,\;SO_4^{2-}\;K^+,\;and\;Mg^{2+}$ is high in the riverside area of the Nakdong River composed of coastal sediments that is influenced by salt water. The downstream area of the Hakjang Stream is judged to be affected by both salt water and artificial pollution. The other part of the study area is interpreted by anthropogenic pollution.

• Research in Community and Public Health Nursing
• /
• v.9 no.1
• /
• pp.232-241
• /
• 1998

음주습관과 심혈관계 질환 위험요인사이의 관련성을 파악하기 위하여, 1996년 한국 경북에 있는 도시지역 한 철강회사에서 40-50대(40-59세) 남자 근로자 3444명으로부터 공복시 혈액을 10m1 채취하여 혈청지질, 혈당, Uric acid를 측정하고 신장, 체중, 혈압(10-20분 휴식후 측정)과 EKG를 측정하였다. 과거병력, 현재 건강상태, 음주량과 기간 및 음주종류를 포함한 생활습관, 흡연량/일, 운동시간/주 등의 설문지를 작성하였다. 알콜 소비량은 양-빈도의 Index에 의해 측정되었다. 한국 중년 남자에 대한 음주량, 음주기간, 알콜종류등에 따른 심혈관계 질환의 위험요인 유무 정도를 알아보기 위해, 비음주자를 기준으로하여 비교대상군은 금주자와 음주량(2군) 등에 의해 3군으로 분류하였으며, 음주기간에 따른 심혈관계 질환의 위험요인 유무정도를 알아보기 위해 비음주자을 기준으로하여 비교 대상군은 금주자와 음주기간(4군)에 따라 5군으로 분류하였다. 알콜종류에 따른 심혈관계 질환의 위험요인 유무정도를 알아보기 위해 비음주자을 기준으로하여 비교 대상군은 금주자와 음주알콜종류(3군)에 따라 4군으로 분류하였다. 심혈관계 질환 위험요인은 기준되는 범주를 2개(Table 1)로 분류하여 2*2표를 이용하여 odds ratio(dummy variable로 처리), ${\beta}$-coefficient와 표준오차를 이용해서 신뢰구간(95% C.I.)을 구하여 유의성 검정을 하였다. 금주자의 정의는 과거 3달 이상 술을 마시지 않는 사람을 말한다. 연구 집단의 평균 연령은 $44.4{\pm}3.9$세 이며, 비음주자는 649명으로 18.9%, 금주자는 70명(2.0%)이며 음주자는 2725명(79.1%)이다. 음주자중 에타놀 섭취를 평균 100.5g/주(median) 미만인 군은 1239명으로 연구집단 3444명중 35.7%이며, 평균 100.5g/주(median) 이상 음주군은 1276명으로 44.5%이었다. 3444명중 1532명(44.5%) 이 맥주와 소주를 섞어서 마시는 사람이었다. 음주 양에서, 연령, 흡연 양, 흡연 기간, 운동, 음주기간, 알콜종류 등을 통제하여 logistic regression한 결과, 비음주자에 비해 중정도 음주자(${\ge}$100.5gm/week ethanol)의 확장기 혈압의 Odds ratio는 1.33배로 유의하게 높았다(P<0.05). 다른 요인들은 통계적으로 유의한 차이를 보이지 않았다. 알콜종류에서도 연령, 흡연 양, 흡연 기간, 운동, 음주양, 음주기간, 등을 통제한, 비음주자에 비해 맥주와 소주를 섞어 마시는 음주자의 확장기 혈압의 Odds ratio는 1.38배로 유의하게 높았다(P<0.01). 다른 요인들은 통계적으로 유의한 차이를 보이지 않았다. 반면에 음주 습관 중 음주기간에서는 연령, 흡연양, 흡연 기간, 운동, 음주양, 알콜종류 등을 통제한 logistic regression 분석 결과 유의한 차이를 보인 것은 없었다. 그러나 음주기간과 심혈관계 질환 위험요인중 수축기와 확장기 혈압과의 관계는 J 모양을 나타내었다 . 수축기 혈압의 금주자군은 비차비가 1.0보다 약간 낮고(Odds ratio=0.88) 음주기간이 2-10년인 군의 Odds ratio=1.14, 음주기간이 11-20 년인군의 Odds ratio =1.18, 21년 이상인 군의 Odds ratio=1.20로 비음주자의 odds ratio=1에 비해 점차적으로 위험이 높아졌다. 확장기 혈압의 금주자군은 비차비가 1.0보다 약간 낮고(Odds ratio=0.91), 음주기간이 1년 이하인 군의 Odds ratio=1.18, 음주기간이 2-10 년인 군의 Odds ratio=1.23, 음주기간이 11-20 년인 군의 Odds ratio=1.27, 21년 이상인 군의 Odds ratio=1.27로 비음주자의 odds ratio=1에 비해 점차적으로 위험이 높아졌다.