1 |
D. W. Fowler, Polymers in concrete: a vision for the 21st century, Cem. Conc. Com., 21, 449-452 (1999).
DOI
ScienceOn
|
2 |
Y. Ohama, Recent research and development trends of concrete-polymer composites in Japan, Proc. 12th Inter. Cong. on Polym. in Conc., September 27-28, Chuncheon, Korea (2007).
|
3 |
D. Van Gemert, L. Czarnecki, et al, Cement concrete and concrete-polymer composites: two merging worlds, Cem. Conc. Compos., 27, 926-933 (2005).
DOI
ScienceOn
|
4 |
J. P. Gorninski, D. C. Dal Molin, and C. S. Kazmierczak, Strength degradation of polymer concrete in acidic environments, Cem. Conc. Compos., 29, 637-645 (2007).
DOI
ScienceOn
|
5 |
M. Haidar, E. Ghorbel, and H. Toutanji, Optimization of the formulation of micro-polymer concretes, Const. Build. Mater., 25, 1632-1644 (2011).
DOI
ScienceOn
|
6 |
L. Czarnecki, A. Garbacz, and J. Kurach, On the characterization of polymer concrete fracture surface, Cem. Conc. Compos., 23, 399-409 (2001).
DOI
ScienceOn
|
7 |
J. T. San-Jose, I. J. Vegas, and M. Frias, Mechanical expectations of a high performance concrete based on a polymer binder and reinforced with non-metallic rebars, Const. Build. Mater., 22, 2031-2041 (2008).
DOI
ScienceOn
|
8 |
J. P. Gorninski, D. C. Dal Molin, and C. S. Kazmierczak, Comparative assessment of isophtalic and orthophtalic polyester polymer concrete: different costs, similar mechanical properties and durability, Const. Build. Mater., 21, 546-555 (2007).
DOI
ScienceOn
|
9 |
J. M. L. Reis, Fracture assessment of polymer concrete in chemical degradation solution, Const. Build. Mater., 24, 1708-1712 (2010).
DOI
ScienceOn
|
10 |
E. H. Hwang and J. M. Kim, Characteristics of concrete polymer composite using atomizing reduction steel slag (I) (Use of PMMA as a shrinkage reducing agent), Appl. Chem. Eng., 25, 181-187 (2014).
DOI
ScienceOn
|
11 |
E. H. Hwang and J. M. Kim, Characteristics of concrete polymer composite using atomizing reduction steel slag as an aggregate (II) (Use of polystyrene as a shrinkage reducing agent), Appl. Chem. Eng., 25, 380-385 (2014).
DOI
ScienceOn
|
12 |
G. B. Bae, S. G. Lee, H. J. Yoon, and J. D. Lee, Preparation and characteristic of sheet molding compound using unsaturated polyester resin with low profile agent of polystyrene, Korean Chem. Eng. Res., 50, 588-593 (2012).
DOI
ScienceOn
|
13 |
E. H. Hwang, J. M. Kim, and J. H. Yeon, Characteristics of polyester polymer concrete using spherical aggregates from industrial by-products, J. Appl. Polym. Sci. 2905-2912 (2013).
|
14 |
J. M. Kim, S. H. Cho, S. Y. Oh, and E. G. Kwak, The properties of underwater-harding epoxy mortar used the rapidly cooled steel slag, J. of the Korea Conc. Instit., 19, 39-45 (2007).
DOI
ScienceOn
|
15 |
E. H. Hwang, C. H. Lee, and J. M. Kim, Physical properties of polymer concrete composite using rapid-cooled steel slag(I), Appl. Chem. Eng., 23, 210-216 (2012).
|
16 |
E. Semerad, P. Kremnitzer, W. Lacom, F. Holub, and P. Sattler, Influence of polymer addition on microscopic properties, Proc. 5th Inter. Cong. on polym. in Conc., Brighton, United Kingdom, 223-228 (1987).
|
17 |
E. H. Hwang, C. H. Lee, and J. M. Kim, Physical properties of polymer concrete composite using rapid-cooled steel slag(II), Appl. Chem. Eng., 23, 409-415 (2012).
|
18 |
D. G. Montgomery and G. Wang, Instant-chilled steel slag aggregate in concrete(strength related properties), Cem. Conc. Res., 21, 1083-1091 (1991).
DOI
ScienceOn
|
19 |
D. G. Montgomery and G. Wang, Instant-chilled steel slag aggregate in concrete(fracture related properties), Cem. Conc. Res., 22, 755-760 (1992).
DOI
ScienceOn
|
20 |
H. Abdel-Fattah and M. M. El-Hawary, Flexural behavior of polymer concrete, Const. Build. Mater., 13, 253-262 (1999).
DOI
ScienceOn
|