• Journal of Hydrogen and New Energy
• /
• v.30 no.2
• /
• pp.111-118
• /
• 2019

Greenhouse gas emissions have a profound effect on global warming. Various environmental regulations have been introduced to reduce the emissions. The largest amount of greenhouse gases, including carbon dioxide, is produced in the steel industry. To decrease carbon dioxide emission, hydrogen-based iron oxide reduction, which can replace carbon-based reduction has received a great attention. Iron production generates various by-product gases, such as cokes oven gas (COG), blast furnace gas (BFG), and Linz-Donawitz gas (LDG). In particular, COG, due to its high concentrations of hydrogen and methane, can be reformed to become a major source of hydrogen for reducing iron oxide. Nevertheless, continuous COG cannot be supplied under actual operation condition of steel industry. To solve this problem, this study proposed to use two alternative COG-based fuel mixtures; one with natural gas and the other with biogas. Reforming study on two types of mixed gas were carried out to evaluate catalyst performance under a variety of operating conditions. In addition, methane conversion and product composition were investigated both theoretically and experimentally.

• Korea Trade Review
• /
• v.44 no.5
• /
• pp.127-142
• /
• 2019

As Korea's steel industry exports 38 percent of its total steel production, the future management environment of the steel industry will change depending on the outcome of the FTA negotiations. The overall industrial structure of the domestic steel industry depends on the rules of origin, which are directly linked to the effect of concessionary tariffs. Therefore, negotiations on rules of origin are as important as tariff liberalization for Korea's steel industry. Korea's cold-rolled and plated companies are expected to be negatively affected as the country of origin standards of steel products have not considered the steel production processes in Korea. In future FTA talks, the country of origin rules should be agreed on a change of tariff classification basis. This result would secure a stable export market through increased predictability of steelmakers and reduce the risk of increased costs of oil and intangible products. In addition, the government should consider the structure of domestic supply and demand so that it does not impose constraints on the change of tariff classification. Finally, participants in the negotiations should consider the opinions of the domestic steel industry.

• Journal of Surface Science and Engineering
• /
• v.53 no.6
• /
• pp.300-305
• /
• 2020

Corrosion of reinforcement steel rebar is a serious problem in a wide range of concrete application for buildings and infrastructures. Hydrophobizing surface treatments, such as self-assembled monolayer coating, edible oil-impregnation and silicone oil-impregnation were applied to solidified concrete. The hydrophobizing of concrete significantly reduces an absorption and transportation of water toward a steel rebar in concrete, so that the corrosion resistance of the steel rebar. In particular, the silicone oil-impregnation not only forms the hydrophobic monolayer on the concrete but also fills the inter-connected pores of concrete, thus the corrosion of steel rebar is significantly inhibited compared to the self-assembled monolayer coating and edible oil-impregnation. Therefore, the silicone oil-impregnation can be a promising candidate for preventing corrosion of steel rebar in concrete for durable performance and safety.

• Journal of Surface Science and Engineering
• /
• v.55 no.3
• /
• pp.164-172
• /
• 2022

Hot-dip galvanized steel(GI) is widely used throughout the industry as a corrosion resistance material. Corrosion of steel is a common phenomenon that results in the gradual degradation under various environmental conditions. Corrosion monitoring is to track the degradation progress for a long time. Corrosion on steel plate appears as discoloration and any irregularities on the surface. This study developed a quantitative evaluation method of the rust formed on GI steel plate using a superpixel-based DBSCAN clustering method and k-means clustering from the corroded area in a given image. The superpixel-based DBSCAN clustering method decrease computational costs, reaching automatic segmentation. The image color of the rusty surface was analyzed quantitatively based on HSV(Hue, Saturation, Value) color space. In addition, two segmentation methods are compared for the particular spatial region using their histograms.

• Transactions of Materials Processing
• /
• v.32 no.5
• /
• pp.247-254
• /
• 2023

This study conducted the wear tests on bending punches coated with PVD CrN and examined the surface quality of the product formed by each punch in the forming of uncoated TRIP1180 sheets. The study quantitatively estimated the surface quality of the product by measuring the roughness and imaging the product surface. The correlation between the punch wear depth and the product surface roughness was quantitatively analyzed. The results showed that before failure occurs, the product roughness was comparable with that of the as-received, and the product surface was smooth without scratches and defects. However, after failure, the punch wear is caused by fretting wear mechanism, and a punch whose coating is not completely peeled plows the product surface, resulting in severe scratches with grooves and ridges on the product surface. Severe wear on the punch surface caused by fretting wear can rapidly degrade the product surface quality as it is directly affected by the punch surface condition, and the product surface quality accurately reflects the punch wear condition.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.5
• /
• pp.69-76
• /
• 1995

This paper describes characteristics of EDT(Electro Discharge Texturing) and that the strip surface has influence on the paintability. The pulse mode and the capacitor mode of recently developed EDT method were investigated about the peak shape and the roughness of strip surface. And EDT method compared the above-mentioned contents with the SBT(Shot Blast Texturing) method. The peak count of the pulse mode is more than that of the capacitor mode. But the lower roughness below the Ra 3.2 .mu. m of the strip surface, the texturing time of the pulse mode is longer than the capacitor mode. In SBT method, the peak shape is similar to capacitor mode. But the EDT roll has more uniformity than the SBT roll and has more peak count than that of SBT roll. Therefore, in the painted steel sheet, EDT roll gives better surface of clarity image than the SBT roll.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.2
• /
• pp.69-76
• /
• 2023

In this study, we present a system for identifying equivalent grades of standardized wire rod steel based on alloy composition using machine learning techniques. The system comprises two models, one based on a supervised multi-class classification algorithm and the other based on unsupervised autoencoder algorithm. Our evaluation showed that the supervised model exhibited superior performance in terms of prediction stability and reliability of prediction results. This system provides a useful tool for non-experts seeking similar grades of steel based on alloy composition.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.329-330
• /
• 2021

벌크화물운송은 해상운송시장에서 가장 큰 규모이고 철강 및 에너지 산업을 뒷받침 하는 중요한 시장이다. 또한 운임의 변동성이 가장 큰 시장으로 상당한 수익을 기대할 수 있는 반면에 파산에 이르는 큰 손실이 발생할 수 있기때문에 시장 참여자들은 합리적이고 과학적인 예측을 기반하여 의사결정을 해야 한다. 그러나 해운시장에서는 과학적 의사결정보다는 경험기반의 의사결정에 의존하기 때문에 시황변동성에 취약하다. 본 논문은 벌크운임예측에 신호 분해 방법인 EMD와 인공신경망을 결합한 하이브리드 모델을 적용하여 과학적 예측방법을 제시하고자 한다. 본 논문은 학문적으로 해운시장 운임예측연구에서 거의 시도되지 않았던 시계열분해법과 기계학습기법을 결합한 하이브리드 모델을 제시하였다는데 의미가 있으며 실무적으로는 해운시장에서 빈번이 일어나는 의사결정의 질이 제고되는데 기여할 것으로 기대된다.

• Korea Trade Review
• /
• v.47 no.6
• /
• pp.355-375
• /
• 2022

In this study, LCA based on EU PAS 2050 and Product Category Rules (PCR) was conducted for steel products with the highest proportion of Korea's exports to the EU among the carbon border adjustment items that were passed by the EU Parliament in June and applied to imports from 2025. Carbon emissions were calculated by (ISO 14040) analysis. As a result of the analysis, the total emission is 394,000 tons, and when converted to the EU ETS weekly price, it is 39,000.000 euros, which is about 5% of the export amount of 734 million dollars. This is the same effect as a 5% tariff increase. This study applies international standards in calculating the carbon footprint and provides information that is closest to the expected amount to be imposed in the future EU CBAM, providing the effect of enabling exporters to establish trade strategies and international competitiveness measures in advance.

• Journal of Digital Convergence
• /
• v.12 no.4
• /
• pp.145-155
• /
• 2014

POSCO has been chosen as the most competitive steelmaker in the world, for the 4th year in a row. It's potentials and key success points lay at technology innovation as well as effective partnerships with suppliers and customers. Partnership with suppliers is based upon the effective supply chain management. While ERP system supports the standard business work flows, the biggest impact on business performance is created by exceptions and variability. A SCM Advanced Planning System reduces the amount of exceptional situations, helping to keep business in a standard mode of operation. A case summary on SCM Advanced Planning System of POSCO as well as its impact on firm performances is presented. As a supplement to this case study, we also investigate the employees' perceived level of SCM-related factors, including information sharing, collaboration, incentive system for suppliers and their impacts on SCM performances. As a conclusion, the practical implications of these findings are discussed.