• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1179-1183
• /
• 2007

관망 내에서 흐름의 연속 방정식과 운동량 방정식을 상 미분으로 전개하여 해석한 특성선 방법은 주로 가압 관망체계(Pressurized Pipeline System)에서의 부정류 해석(Unsteady Analysis)에 사용 된다. 그러나 이특성선 방법은 천이류 해석을 위한 관망 재구성 과정에서 Courant수 조건의 만족을 위한 관의 재배열에 천문학적인 계산용량과 시간이 필요하다는 단점이 있다. 이는 현장 적용 시 압력파 전파속도의 불확실성과 연계되어 상당한 장해요소가 되고 있다. 이에 대안적인 방법으로서 임펄스응답법이 개발되었다. 이는 경계지점에서 복소수 유량에 대한 복소수 수두의 비율로써 정의된 관망에서의 수리임피던스를 역퓨리에 변환에 적용하여, 주파수 영역의 수치를 시간 영역으로 변환하여 응답함수를 산출한 후, 산출된 응답함수와 구해진 경계지점에서의 유량과의 적분을 통하여 임의의 지점에서의 수두 및 유량을 계산하는 방법이다. 임펄스 응답법은 관 부속물관의 특성을 기술하는 수학적 표현의 난해함으로 인해 지금까지는 단일관에 대한 연구에만 국한되어 왔다. 본 연구에서는 임펄스응답법을 수리구조물이 부착된 관망에 적용하여 다양한 조건에서 천이류 분석을 시행하였다. 즉, 에어챔버 및 서지탱크와 같은 수리구조물을 각각에 대한 수리임피던스를 구하고, 가지관 및 통합 관성항으로 취급하여 수리구조물을 처리하였다. 그리고 이러한 결과를 특성선방법과 비교하여 그 적절성을 검증하였는데, 특성선 방법에 의한 모의 결과와 비교하였을 때, 일치하는 결과를 나타내었다. 임펄스응답법에 의한 모의 결과에서 감쇄효과를 과대평가하는 경향이 관찰되었다. 이는 임펄스 응답법의 가정에 기인한 것으로써 난류 상태의 흐름에서 상당한 불일치를 가져올 수 있으나, 수리 구조물에 의한 수격압이 감쇄되는 과정에서 대부분 흐름이 층류 상태로 전환된다고 가정 할 때는 상당한 적용성이 있다. 본 연구는 수리구조물이 부착된 관망의 해석함에 있어서 임펄스응답법의 적용이 가능함을 보였고, 이는 보다 복잡한 관망에서의 천이류 해석이 가능함을 시사한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.3 s.73
• /
• pp.295-302
• /
• 2006

In this study, computational structural dynamic analyses of a gyrocopter have been conducted considering unsteady dynamic hub-loads due to rotating blades. 3D CATIA models with detailed mechanical parts we constructed and virtually assembled into the complete aircraft configuration. The dynamic loading generated by rotating blades in the forward flight condition are calculated by a commercial computational fluid dynamics (CFD) code such as FLUENT. Modal based transient and frequency response analyses are used to efficiently investigate vibration characteristics of the gyrocopter. Free vibration analysis results for different fuel and pilot conditions, frequency responses and transient responses for critical flight conditions are also presented in detail.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.575-584
• /
• 2017

It is suggested the circuit network to analyze the time response of control system. And it is analyzed the interrelation for classical control and modern control by the transfer function and the state equation. Without complicated integration of state transition equation, it is suggested to possible time response by combining the state transition matrix and the transfer function. A source program is coded to display the time response according to the unit-step and the sinusoidal input. Transient response is analyzed in the unit-step input and phase difference between current and voltage is analyzed in sinusoidal input. As writing the suggested contents in transient response or state-space analysis, it is improved the understanding for control engineering and ability for system design.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.9 s.114
• /
• pp.926-936
• /
• 2006

In this study, structural vibration analyses of a smart unmanned aerial vehicle (UAV) have been conducted considering dynamic loads generated by rotating rotor and wakes. The present UAV (TR-S5-03) finite element model is constructed as a full three-dimensional configuration with different fuel conditions and tilting angles for helicopter, transition and airplane flight modes. Practical computational procedure for modal transient response analysis (MTRA) is established using general purpose finite element method (FEM) and computational fluid dynamics (CFD) technique. The dynamic loads generated by rotating blades in the transient and forward flight conditions are calculated by unsteady CFD technique with sliding mesh concept. As the results of present study, transient structural displacements and accelerations are presented in detail. In addition, vibration characteristics of structural parts and installed equipments are investigated for different fuel conditions and tilting angles.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.367-375
• /
• 2006

In this study, structural vibration analyses of a smart unmanned aerial vehicle (UAV) have been conducted considering dynamic loads generated by rotating rotor and wakes. The present UAV (TR-S5-03) finite element model is constructed as a full three-dimensional configuration with different fuel conditions and tilting angles for helicopter, transition and airplane flight modes. Practical computational procedure for modal transient response analysis (MTRA) is established. using general purpose finite element method (FEM) and computational fluid dynamics (CFD) technique. The dynamic loads generated by rotating blades in the transient and forward flight conditions are calculated by unsteady CFD technique with sliding mesh concept. As the results of present study, transient structural displacements and accelerations are presented in detail. In addition, vibration characteristics of structural parts and installed equipments are investigated for different fuel conditions and tilting angles.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.3
• /
• pp.58-65
• /
• 2004

Thermal and structural finite element analyses were performed for the turbopump turbine bladed disk model with shroud of a liquid rocket engine. The only 1/80 part model was analyzed which consists of 3D eight node isoparametric solid elements. The applied loading history consists of a startup condition with a thermal spike and a steady state. Heat transfer coefficient on the blade was predicted using the commercial Navier-Stokes solver, Fluent. Transient thermal responses during startup and steady states were calculated using a 3D finite element code developed. Maximum stress and shroud tip displacement under the influence of centrifugal and thermal loading were also determined.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.87-94
• /
• 2006

In this study, nonlinear crash analyses have been conducted for the skid landing gear of a helicopter. The realistic landing gear model of the commercial helicopter (SB427) is considered. Three-dimensional dynamic finite element model with variable thickness and material plastic behavior is constructed and LS-DYNA(Ver.970) is used to conduct nonlinear transient crash analyses for different impact conditions. Characteristics of nonlinear transient responses due to the ground crash are investigated for typical structural design criteria of a skid landing gear system. In addition, comparison results for maximum crash deformations of the skid landing gear are presented and the important effect of ground friction for numerical accuracy is described.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.217-223
• /
• 1997

This paper deals with the basic concepts of sensitivity analysis in a time domain for the transient response of a lumped mass system. Sensitivity analysis methods in thme domain for determining the effects of parameter changes on the response of a dynamic system by external excitation are presented. The parametric sensitivity of a lumped mass system in time domain can be investigated using different types of sensitivity functions, including first order standard and percentage sensitivity functions. These sensitivity functions are determined as a function of partial derivatives of system variables taken with respect to system parameters. In addition, we compared the results of the analytical method by direct method and those of numerical methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.6
• /
• pp.75-85
• /
• 1994

주기함수의 외력을 갖는 버선형 시스템의 다양한 응답 특성을 구하기 위해 새로운 조화함수법(HBM)을 적용하였다. 새로운 조화함수법의 해는 비선형항을 선형항으로부터 따로 분리시킨 다음 같은 주파수 성분을 갖는 비선형 방정식들을 Newton-Raphosn법으로 풀어서 구하였다. 다양한 천이(Bifurcation) 특성을 해석적으로 판별하기 위하여 HBM의 해를 이용하여 구한 섭동 방정식의 Floquet 지수의 고유해를 사용하였다. 새로이 개발한 HBM과 천이 판별법을 1차원 비선형항을 갖는 구조물인 ALP(Articulated Loading Platform) 모델과 다차원인 비선 형 회전체 모델에 적용시켜 HBM의 해의 정확성과 이들 시스템의 천이 특성의 하나인 Chaos 존재를 확인 하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.813-820
• /
• 2005

In this study, finite element modeling and structural vibration analyses of a gyrocopter have been conducted considering dynamic hub-loads due to rotating blades. For this research, 3D CATIA models for most mechanical parts are exactly prepared and assembled into the final aircraft configuration. Then the dynamic finite element model including several non-structural parts are constructed based on the exact 3D CAD data. Computational structural dynamics technique based on finite element method is applied using both MSC/NASTRAN and developed in-house code which can largely reduce the pre and postprocessing time of general transient dynamic analyses. Modal based transient and frequency response analyses are used to efficiently investigate vibration characteristics. The results include natural frequency comparison for different fuel and pilot conditions, fundamental natural mode shapes, frequency responses and transient acceleration responses of the present gyrocopter model.