• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.389-389
• /
• 2022

상수도 관망에서의 유량 측정은 유수율을 결정하는 데 있어서 중요한 평가 수단이다. 따라서, 유량 측정을 위해 유량계를 활용하는데, 높은 빈도의 자료를 획득할 수 있는 수압계는 시중에서 저가로 활용 가능하지만, 상수도관망 예산의 상당부분을 차지하고 있는 유량계는 수압계보다 고가에도 낮은 빈도의 자료만을 획득하는 비용 대비 낮은 효율을 가진다. 만약 수압계의 측정자료를 유량자료로 고속전환하는 기술을 개발하면 기존의 유량계보다 적은 비용으로 고빈도의 유량자료를 획득할 수 있다. 상수도 관망에서 수압자료를 유량 자료로 전환하는 기술은 기존 관망에서 유도된 지배방정식에서 임의 관망에서 일련의 유도과정을 거쳐 상하류 단사이 수압과 유량의 관계를 형성하고, 이러한 관계를 활용하여 간단한 저수조-관망-밸브 체제에서 관망 내의 특정지점에서의 시간상 수압자료와 시간상 유량자료의 비를 정의한 다음, 임의의 지점에서 측정된 수압자료를 정의한 비로 나타나는 임피던스 역수를 역푸리에 전환하면 시간상의 유량자료를 획득할 수 있는 원리이다. 이러한 수압-유량 전환기술의 원리를 가지고 개발된 기술의 정확도를 확인하는 과정을 수행하였으며, 이는 전통적 천이류 해석 방법인 특성선 모델로 비교하는 수치해석적인 방법 그리고 실제 설치된 관망을 사용해서 수압을 측정하고, 지정된 지점에서 유량을 정밀측정하여 비교하는 실험적인 방법을 통해 정확도를 비교해봄으로써 개발된 기술을 검증해보고자 한다.

• Tunnel and Underground Space
• /
• v.11 no.4
• /
• pp.319-327
• /
• 2001

Introduction of new design tools has been required to optimally design and operate the ventilation system of long vehicle tunnels.. The demand has led to wide spread use of the simulation technique throughout the would to analysis the dynamic relationship among the variables associated with vehicle tunnel ventilation. This paper aims at performing on-site study at local tunnels to test the applicability of NETVEN, a simulation model vehicle tunnel ventilation. The study was carried out at four urban as well as highway tunnels model of vehicle tunnel ventilation. The study was carried out at four urban as well as highway tunnels employing different ventilation systems as well as traffic methods. There were some discrepancies sound between the simulation output and measurements and the following four factors are considered to mainly cause those disagreement. (1) The real situation shows distinctive transient and retarding characteristics with respect to air flow and contaminant dispersion, while ventilation forces are not steady-state and in particular those traffic and climatic variables show significant instantaneous variation. (3) Near the exit portal, the CO levels show bigger differences. The general trend is that data with higher CO concentrations carry bigger discrepancies. Turbulent diffusion is though to be the main reason for it and also contribute to the fact hat the highest CO concentrations are found at the locations somewhat inward, not at the exit portals. (4) Higher traffic rate results in higher discrepancies of ventilation velocity. Along with the exhaust characteristics, the vehicle aerodynamic characteristics need to be studied continuously in order to reduce the velocity disagreement.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.245-256
• /
• 2000

A moment-curvature relationship to simulate the behavior of reinforced concrete beam under cyclic loading is introduced. Unlike previous moment-curvature models and the layered section approach, the proposed model takes into consideration the bond-slip effect by using monotonic moment-curvature relationship constructed on the basis of the bond-slip relation and corresponding equilibrium equation at each nodal point. In addition, the use of curved unloading and reloading branches inferred from the stress-strain relation of steel gives more exact numerical result. The advantages of the proposed model, comparing to layered section approach, may be on the reduction in calculation time and memory space in case of its application to large structures. The modification of the moment-curvature relation to reflect the fixed-end rotation and pinching effect is also introduced. Finally, correlation studies between analytical results and experimental studies are conducted to establish the validity of the proposed model.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.281-287
• /
• 2005

Nonlinear behaviors such as steep-fronted wave motions and a finite amplitude limit cycle often accompanying combustion instabilities have been numerically investigated using a characteristic-based approximate Riemann solver and the well-known ${\eta}-{\tau}$ model. A resonant pipe initially subjected to a harmonic pressure disturbance described the natural steepening process that leads to a shocked N-wave. For a linearly unstable regime, pressure oscillations reach a limit cycle which is independent of the characteristics of the initial disturbances and depends only on combustion parameters and operating conditions. For the 1.5 MW gas generator under development in KARI, the numerical results show good agreement with experimental data from hot-firing tests.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.696-702
• /
• 2004

Lifetime of excited electronic states inside the 4f configuration of rare-earth elements embedded in chalcogenide glasses is very sensitive to medium-range structural changes of the host glasses. We have measured lifetimes of the 1.6$\mu\textrm{m}$ emission originating from Pr$\^$3+/ : ($^3$F$_3$, $^3$F$_4$)\longrightarrow$^3$H$_4$ transition in amorphous chalcogenide samples consisting of Ge, Sb, and Se elements. The measured lifetimes fumed out to have their maximum at the mean coordination number of -2.67, which arises accordingly from structural changes of the host glasses from 2 dimensional layers to 3 dimensional networks. This new finding supports that the so-called topological structure model together with chemically ordered network model is adequate to explain relationship between the emission properties of rare-earth elements and the medium-range structures of amorphous chalcogenide hosts with a large covalent bond nature. Thus, it is validated to predict site distribution and lifetime of rare-earth elements doped in chalcogenide glasses simply based on their mean coordination number.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.8
• /
• pp.748-755
• /
• 2012

Friction causes self-excited vibration, stick-slip vibration and any other friction-induced phenomena. That kinds of vibrations cause chatter and squeal. In order to predict such vibrations accurately, employing an accurate friction model is very important because a dynamic behavior of a system with friction is dominantly governed by a friction model. A Coulomb friction model is the most widely known model. Coulomb friction model is useful model to obtain analytical solutions of the system with friction and the model gives relatively good simulation result. However, defining a friction force at a stick state in simulation is hard because of the characteristic itself and a Coulomb friction model is discontinuous function between a static and a dynamic friction coefficient. Therefore, applying the Coulomb friction model to a simulation is not appropriate. In order to resolve these problems, an approximated Coulomb friction model was developed using simple and continuous function. However, an approximated Coulomb friction model cannot realize stick. Therefore, an approximated Coulomb friction model cannot describe friction phenomena accurately. In order to analyze a friction phenomenon accurately, a friction model for a simulation was proposed in this paper. A proposed friction model realizes stick and gives reasonably good results compared to results obtained by the simulation employing an approximated Coulomb friction model. Accuracy of a proposed friction model was verified by comparing experimental results.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.2
• /
• pp.75-82
• /
• 2004

The changes of sea bottom configuration, which may cause the coastal disasters, have been considered as social problems. It is obvious that the beach deformation is attributable to the sediment transport associated with erosion and acceration. The prediction method and countermeasures for them, however, are not on the level of satisfaction, which indicates that efforts should be made on developing them. In this study, it is found at the groin constructed in Sangju beach on e purpose of beach protection did the aversive function. The reason for this was judged that they accelerated the speed of erosion by increasing the velocity wave-induced current rather than brought storage effect of sediment. Authors found that the storage sediment estimation model by Sonu and Beek(1971) is a useful model at the Sangju beach with the use of topographical survey data from July, 1987 to March, 2003.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.12
• /
• pp.59-68
• /
• 1999

The timing characteristics of an ASIC are analyzed based on the propagation delays of each gate and interconnect wire. The gate delay can be modeled using the two-dimensional delay table whose index variables are the input transition time and the output load capacitance. The AWE technique can be adopted as an algorithm to compute the interconnect delay. Since these delays are affected by the interaction to the two-dimensional delay table and the AWE technique. A method to model this effect has been proposed through the effective capacitance and the gate driver model under the assumption of single driving gate. This paper presents a new technique to handle the multiple CMOS gates driving interconnect wire by extending previous approach. This technique has been implemented in C language and applied to several interconnect circuits driven by multiple CMOS gates. In most cases, we found a few tens of speed-up and only a few percents of errors in computing both of gate and interconnect delays, compared to SPICE.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.943-946
• /
• 2010

과거 시행된 수질오염물질의 농도규제 정책은 오염배출업소 증가로 인한 오염총량의 증가를 억제할 수 없어 수질개선에 한계가 나타났다. 이에 정부는 배출농도 규제방식의 수질관리로 4대강 상수원의 수질개선이 어려워 4대강 특별법 제정과 함께 목표수질기준 한도에서 유역의 오염물질 배출량을 총체적으로 관리하는 오염총량관리제도를 도입하였고, 현재 수질오염총량관리제도의 안정적 시행을 위해, 제 2단계 수질오염총량관리 대상물질 선정연구, 4대강 수계 수질오염총량관리 유황별 유달율 산정 방법 연구 등이 시행되고 있다. 이와 같은 오염총량관리를 위해서는 먼저 유역의 오염물질 발생현황과 배출 기작을 정량적으로 규명하고, 수질모델링을 실시하여 오염배출원별로 적정부하량을 할당하여야 한다. 이에 본 연구에서는 향후 활용도가 클 것으로 기대되는 QUALKO2 모형을 이용하여 TMDL시스템을 지원하고 낙동강의 수질을 예측 평가 하고자 한다. 대상유역으로는 영주 다목적댐이 위치하게 되는 내성천과 낙동강을 선정하였으며 모의 입력자료로는 최근 3년간의 평균수질을 비교대상인 현재 상태로 설정하고, 해당유역의 발생배출량에 따라 2014년, 2019년, 2024년의 저수지 모의를 통해 하천모의의 입력자료로 사용하였다. 수질모델 적용을 위해 내성천이 유입되는 지점에서 8km상류의 예천(환경부 측정망)지점에서부터 양산천 유입 후 3km 지점까지 범위를 설정하였으며 모델 구간은 "낙동강수계 오염총량관리 기본계획" 수립시 적용한 구간을 고려하여 구성하였다. 내성천 상류 영주댐 건설 지점에서부터 낙동강 본류로 합류되기 전의 구간과 낙동강 본류 구간을 구분하였으며, 수리학적 지형학적 특성을 고려하여 구간(reach)으로 구분하고 각 구간을 1km 간격의 요소(element)로 세분화하여 총 96여개의 구간과 482여개의 요소로 구성하였다. 영주댐이 건설되는 가정하에 낙동강 본류의 유량조건별, 영주댐의 방류량 조건에 따른 내성천과 낙동강 본류의 수질변화 양상 분석결과, 저수시 보다는 갈수시에 수질농도의 저감효과가 크게 나타났으며, 영주댐의 연평균방류보다는 최대방류시에 내성천과 낙동강 본류의 저감효과가 큰 것으로 분석되었다. 또한 영주댐 건설로 인한 flushing 효과와 낙동강 상류의 안동댐과의 연계시에 낙동강에서 저감효과가 가장 크게 나타났다.

• Journal of Korea Multimedia Society
• /
• v.6 no.2
• /
• pp.216-223
• /
• 2003

In this paper, we present SCCRS(Speech and Character Combined Recognition System) for speaker /writer independent. on-line multimodal interfaces. In general, it has been known that the CHMM(Continuous Hidden Markov Mode] ) is very useful method for speech recognition and on-line character recognition, respectively. In the proposed method, the same CHMM is applied to both speech and character recognition, so as to construct a combined system. For such a purpose, 115 CHMM having 3 states and 9 transitions are constructed using MLE(Maximum Likelihood Estimation) algorithm. Different features are extracted for speech and character recognition: MFCC(Mel Frequency Cepstrum Coefficient) Is used for speech in the preprocessing, while position parameter is utilized for cursive character At recognition step, the proposed SCCRS employs OPDP (One Pass Dynamic Programming), so as to be a practical combined recognition system. Experimental results show that the recognition rates for voice phoneme, voice word, cursive character grapheme, and cursive character word are 51.65%, 88.6%, 85.3%, and 85.6%, respectively, when not using any language models. It demonstrates the efficiency of the proposed system.