• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.11-16
• /
• 2006

An experimental study of the transonic flows over NACA and double wedge airfoils was conducted with a shock tube. The configuration of test section with a slotted wall and chamber was designed and tested to minimize wall and reflected shock wave effects and use the shock tube as simple and less costly wind tunnel generating the relatively high Reynolds numbers transonic flow. Transonic airfoil flows at hot gas Mach numbers of 0.80~0.84, Reynolds number of about $1.2{\times}10^6$ on airfoil chord length and angles of attack of $0^{\circ}$ and $2^{\circ}$ were visualized with the shadowgraph method. The shock wave profiles on the airfoils were compared with the corresponding results from the conventional transonic wind tunnel tests. The experimental results showed that present shock tube exhibited the proper performance characteristics as transonic wind tunnel for tested Mach number range and airfoils.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.4
• /
• pp.295-301
• /
• 2007

The aeroelastic characteristics of a wing with control surface freeplay are investigated. The transonic small disturbance equation is used for unsteady aerodynamic forces in subsonic/transonic region. The fictitious mass method is introduced to apply a modal approach to nonlinear structural models. Nonlinear aeroelastic time responses are calculated by the coupled time integration method. Using these methods, an efficient aeroelastic analysis is achieved for aerodynamic and structural nonlinearities simultaneously. The effects of the aerodynamic nonlinearity, initial flap amplitude, and freeplay magnitude in aeroelastic characteristics are investigated in this study.

• Journal of computational fluids engineering
• /
• v.6 no.2
• /
• pp.9-21
• /
• 2001

초음속 여객기의 천음속 순항 성능을 개선하기 위하여 날개의 플랩 꺽임각을 최적화하였다. 이를 위하여 3차원 Euler 코드와 adjoint 코드를 이용한 최적설계기법을 적용하였다. 설계변수로서, 앞전플랩 5개, 뒷전 플랩 5개 등 총 10개의 플랩의 꺽임각이 사용되었다. 설계과정중에 격자계 내부격자점의 수정을 위해 타원형방정식법을 이용하였다. 계산 시간의 단축을 위해 내부격자의 민감도는 무시하였다. 또한 본 설계문제에 근사구배기법의 적용가능성 여부를 조사하였다. 충격파가 없는 경우 앞전 플렙에 한하여 근사구배기법을 적용할 수 있음을 알았다. 최적설계기법으로 BFGS기법을 적용하여 항력을 최소화하였으며, 양력 및 날개 표면 마하수에 대한 제약조건을 적용하였다. 앞전 플랩의 최적화 및 앞전과 뒷전 플랩의 최적화 등 두 개의 설계 문제를 고려하였다. 성공적인 결과를 얻음으로써 본 설계방법의 타당성 및 효율성을 확인하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.10
• /
• pp.984-991
• /
• 2009

In this study, transonic aeroelastic response analyses have been conducted for the DLR-F4(wing-body) aircraft configuration considering shockwave and flow separation effects. The developed fluid-structure coupled analysis system is applied for aeroelastic computations combining computational structural dynamics(CSD), finite element method(FEM) and computational fluid dynamics(CFD) in the time domain. It can give very accurate and useful engineering data on the structural dynamic design of advanced flight vehicles. For the nonlinear unsteady aerodynamics in high transonic flow region, Navier-Stokes equations using the structured grid system have been applied to wing-body configurations. In transonic flight region, the characteristics of static and dynamic aeroelastic responses have been investigated for a typical wing-body configuration model. Also, it is typically shown that the current computation approach can yield realistic and practical results for aircraft design and test engineers.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.1 no.1
• /
• pp.145-153
• /
• 1998

In the direct numerical optimization method, the aerodynamic coefficients of the airfoil designed by one-point design can be deteriorated at other operating points. Therefore, the capacity of the multi-point design is indispensable for actual airfoil design. In this paper, the two-point design of transonic airfoils is studied based on the Navier-Stokes equations flow solver and the feasible direction optimization algorithm, and the effects of weighting parameter were analyzed and compared. The results show that the airfoils designed by two-point design satisfy the performances at the peripheral regions of two operating points concurrently and have the favorable aerodynamic characteristics at the point which has larger weighting parameter than the other point.

• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.82-93
• /
• 2023

In this paper, nonlinear transonic flutter analyses of a composite missile fin considering the effect of delamination are conducted. An effective modal analysis methodology is adopted and verified with the experimental modal test data for laminated composite plates with delamination. Extended version of the in-house computational aeroelastic analysis program with the transonic small-disturbance (TSD) code is used in order to predict the flutter dynamic pressure of the delaminated composite fin models. In the subsonic, transonic, and supersonic flow regions, nonlinear time-domain flutter analyses are performed for various delamination conditions, and aeroelastic characteristics due to the delamination phenomena are examined in detail.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.6
• /
• pp.445-451
• /
• 2018

This paper describes on introduction of CASE 4(Delta Wing) for EFD-CFD comparison workshop which is in charged of aerodynamic subcommittee of The Korean Society for Aeronautical and Space Science. The wind tunnel test will be performed later, angle of attack is set -5~20deg and mach number is set 0.7, 0.85, 1.2 to solve the transonic flow. The simulation test of grid dependency is conducted to determine the proper grid size of delta wing analysis. The tendency of lift and drag coefficient is determined according to the change of angle of attack based on the selected grid size.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.233-240
• /
• 2017

The flowfield around transonic wing-body configuration was simulated using in-house CFD code and compared with the experimental data to understand the influence of several features of CFD(Computational Fluid Dynamics) ; grid dependency, turbulence models, spatial discretization, and viscosity. The wing-body configuration consists of a simple planform RAE Wing 'A' with an RAE 101 airfoil section and an axisymmetric body. The in-house CFD code is a compressible Euler/Navier-Stokes solver based on unstructured grid. For the turbulence model, the $k-{\omega}$ model, the Spalart-Allmaras model, and the $k-{\omega}$ SST model were applied. For the spatial discretization method, the central differencing scheme with Jameson's artificial viscosity and Roe's upwind differencing scheme were applied. The results calculated were generally in good agreement with experimental data. However, it was shown that the pressure distribution and shock-wave position were slightly affected by the turbulence models and the spatial discretization methods. It was known that the turbulent viscous effect should be considered in order to predict the accurate shock wave position.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.31-36
• /
• 2006

In this study, nonlinear static aeroelastic analysis system for a high-aspect-ratio wing are developed using the transonic small disturbance (TSD) and large deflection beam theory and validated. For the coupling between fluid and structure, the transformation of displacement from the structural mesh to aerodynamic one is performed by the shape function of the beam finite element and the inverse transformation of force by work equivalent load concept. Also, for the static aeroelastic analysis of the wing the use of TSD aerodynamics are justified. The validation of the system includes one of the efficient transformation methods of force and displacement.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.414-420
• /
• 2010

This paper presents a validation of the accuracy of a reduced order model(ROM) and the efficiency of the design optimization using a Proper Orthogonal Decomposition(POD) to transonic wing/fuselage system. Three dimensional Euler equations are solved to extrude snapshot data of the full order aerodynamic analysis, and then a set of POD basis vectors reproducing the behavior of flow around the wing/fuselage system is calculated from these snapshots. In this study, reduced order model constructed through this procedure is applied to several validation cases, and then it is confirmed that the ROM has the capability of the prediction of flow field in the space of interest. Additionally, after the design optimization of the wing/fuselage system with the ROM is performed, results of the ROM are compared with results of the design optimization using response surface model(RSM). From these, it can be confirmed that the design optimization with the ROM is more efficient than RSM.