• 한국자원식물학회지
• /
• 제18권2호
• /
• pp.216-222
• /
• 2005

복숭아나무 전정 과정에서 발생하는 부산물인 절지의 천연염료로서 이용성을 조사하였다. 복숭아 가지 추출물로 견과 면직물을 염색한 결과 견직물의 표면색은 매염제에 따른 차이가 있는 가운데 무염색포에 비해 색차(${\Delta}$값)가 11.63에서 30.86까지 나타났다. 면직물은 무매염시 17.71에서 황산철 매염시 40.41로 견직물 보다 염색성이 좋은 것으로 나타났다. 매염제에 따라서는 소석회와 가성소다 매염시 a값이 높게 나타났으며, 황산구리와 명반, 식초 매염시는 b값이 높게 나타났다. 세탁을 3회 실시한 뒤 표면색을 조사한 결과 매염제에 따른 차이는 다소 있었으나 전체적으로 무염색구와의 사이에 색차가 줄어든 것으로 나타나 세탁 견뢰도는 다소 약한 것으로 나타났다. pH가 다른 수세액에 의한 수세 및 일광처리 후 표면색의 변화를 조사한 결과처리 전후간에 차이가 적어 pH에 대한 견뢰도 및 일광 견뢰도는 비교적 좋은 것으로 나타났다.

• 한국자원식물학회지
• /
• 제18권1호
• /
• pp.71-77
• /
• 2005

복숭아나무 전정 과정에서 발생하는 부산물인 절지의 천연염료로서 이용성을 조사하였다. 복숭아 가지 추출물로 견과 면직물을 염색한 결과 견직물의 표면색은 매염제에 따른 차이가 있는 가운데 무염색 포에 비해 색차(${\Delta}E$값)가 11.63에서 30.86까지 나타났다. 면직물은 무매염시 17.71에서 황산철 매염시 40.41로 견직물 보다 염색성이 좋은 것으로 나타났다. 매염제에 따라서는 소석회와 가성소다 매염시 a값이 높게 나타났으며, 황산구리와 명반, 식초 매염시는 b값이 높게 나타났다. 세탁을 3회 실시한 뒤 표면색을 조사한 결과 매염제에 따른 차이는 다소 있었으나 전체적으로 무염색구와의 사이에 색차가 줄어든 것으로 나타나 세탁 견뢰도는 다소 약한 것으로 나타났다. pH가 다른 수세액에 의한 수세 및 일광 처리 후 표면색의 변화를 조사한 결과 처리 전후간에 차이가 적어 pH에 대한 견뢰도 및 일광 견뢰도는 비교적 좋은 것으로 나타났다.

• 한국의류산업학회지
• /
• 제20권3호
• /
• pp.323-330
• /
• 2018

This study aim is to provide new coloration method by laccase-catalyzation on natural phenolic dyeing process. In this study, silk was dyed with black tea, which is one of polyphenolic dye, extracted in distilled water. The dyed samples were catalyzed by laccase as the eco-friendly mordanting process. To optimize the conditions of laccase-catalyzed coloration, conditions were varied by different mordanting methods (one-bath, two-bath), temperature and treatment time. The dye affinity in terms of the value of K/S, $L^*$, $a^*$, $b^*$, and H, V, C was measured by Computer Color Matching System (CCM, CM-2600d, Spectra Magic NX, Korea). The effect of laccase-catalyzed coloration on washing fastness was evaluated and compared with the synthetic mordant (Al, Cu, and Fe). As the result of color analysis of dyed silk, the optimum conditions of laccase-catalyzed coloration were determined to post-mordanting by one-bath at $50^{\circ}C$ for 3 hours. Under the optimum laccase-catalyzed conditions, the dyed silk was shown the color of yellowish-red. After laccase-catalyzed coloration on the dyed silk, the improvement of washing fastness was obtained compared with mordanted silk by synthetic mordant (Al, Cu, and Fe). Therefore, the present study was demonstrated that the effective enzymatic mordanting method by laccase for phenolic natural dyeing with vivid color and good fastness.

• 패션비즈니스
• /
• 제10권1호
• /
• pp.120-131
• /
• 2006

Recently, it has been reported that chemical hair coloring can cause allergic reactions, the toxicity issue of chemical hair color was issued. Therefore, there is an increasing interest in the hair coloration technique using non-toxic and bio-compatible hair color gotten from natural resource. In this study, the possibility using fermented Indigo as natural hair coloring agent was investigated. Bleached hair samples were dyed using Indigo, and the effect of dyeing frequency, the physical change after dyeing, color, surface and cross-section characteristics, and tensile property were also studied. In addition, the protection property of cationic detergent finishing on damaged hair samples were also studied. The following conclusions are made; 1. While bleached hair samples with low value showed the negligible effect of repeated dyeing, bleached hair samples with high value showed the good effect of repeated dyeing. 2. Hair sample dyed with Indigo showed a high light-fastness, however, tensile strength and elongation showed very low values (high damage on hair sample). 3. Cationic detergent finishing did not affect on the colorfastness because of decoloration after dyeing, however, it increased the smoothness of hair sample, and therefore, can use as protectant of damaged hair. 4. Hair scale was damaged after dyeing. It seemed that the alkali, potassium carbonate, increased pH of dyeing bath to 11, as a result, the hair was swollen, weaken, and dissolved on the prolonged dyeing time. Dyed hair sample became stiff and fine. 5. The color difference was 4.62 (a high fastness value) in the test of sunlight exposure, shampoo, cationic detergent finishing, and acid perspiration fastness.

• 대한가정학회지
• /
• 제45권10호
• /
• pp.73-81
• /
• 2007

The purpose of this study was to increase the ultraviolet-light (UV)-cut ability of cellulose fabrics (cotton, ramie, and rayon) dyed with safflower yellow colorants. For this purpose, samples treated with UV-cut agent and tannic-acid were compared with the untreated samples after UV exposure in terms of K/S value, color changes(${\Delta}E$), SEM, and strength retention. The K/S value rapidly decreased after 28 days exposure, whereas the K/S value of the samples treated with both UV-cut agent and tannic-acid decreased to less than that of the untreated samples. In color changes, $L^*$ increased while $a^*$ and $b^*$ decreased, indicating less red and yellow character in color. This induced a change in the hue, value and chroma values. However the color change(${\Delta}E$) of the samples treated with both UV-cut agent and tannic-acid was less than that of the untreated samples. Scanning electron microscopy (SEM) pictures showed a severe degradation by exposure in all samples. Tensile strength rapidly decreased after 28 days for cotton and rayon, and after 21 days for ramie. However, the strength retention of the samples treated with UV-cut agent and tannic-acid was higher than that of the untreated samples.

• 한국염색가공학회지
• /
• 제23권3호
• /
• pp.169-178
• /
• 2011

The purpose of this study is to develop eco-printing method using natural dyes combined with chitosan treatment to impart various pattern effect on cotton fabric. It was examined whether tone-on-tone pattern effects could be produced by screen printing with chitosan paste and subsequently dip-dyed in natural dye bath. For polychromic colorants, fabrics were pre-mordanted and then screen printed with chitosan, while only chitosan printing treatment was applied for monochromic colorants. Color, dye uptake, washing, light and rubbing fastnesses of printed fabrics were measured in relation to the presence of chitosan printing. Pre-mordanting and chitosan printing treatment were applied to such polychromic colorants as madder, sappanwood, onion and cochineal. Also, printing pattern formation on fabrics was evaluated by differences in dye uptake and color. The results suggested that madder, onion and cochineal were effective on pattern formation. Regarding sappanwood, since dye uptake was increased only by pre-mordanting without chitosan printing treatment, there was little color difference and thus patterns were not clearly distinguished. Chitosan printing treatment tended to increase washing, light and rubbing fastnesses of dyed fabrics with polychromic colorants. Chitosan printing treatment was applied to monochromic colorants such as chlorophyll, gardenia and indigo and the effect of printing formation was examined according to the difference in dye uptake. Among monochromic dyes tried, chlorophyll was effective and chitosan printing improved washing and light fastnesses.

• 한국염색가공학회지
• /
• 제29권1호
• /
• pp.45-54
• /
• 2017

Ultraviolet radiation have much influenced with a deep wrinkles, roughness, laxity of skin damage and pigmentation through oxidative stress and oxidative photo-damage. This study investigates the functional properties of hydrogel facial mask sheets made from agar, Styela clava tunics and Broussonetia papyrifera tunics. The skin of S. clava is covered with a hard cellulose containing glycoprotein, glycosaminoglycan and chondroitin sulfate. B. papyrifera is better known as Paper mulberry. It contains kazinol which serves as a tyrosinase inhibitor and skin whitening agent. The tensile strength of facial mask sheet was measured by universal testing machine, and the water absorption and moisture permeability of facial mask sheet were measured by dryer. Additionally, the DPPH assay and MTT assay were conducted for anti-oxidative activity and cytotoxicity of facial mask sheet. The whitening effect of the facial mask sheet was measured by tyrosinase inhibitor assay. These tests showed that the three ingredients are suitable cosmetic materials. The results reveal that they produce a high quality hydrogel facial mask sheet when the membrane contains 1%(W/V) of agar, 0.1%(W/V) of B. papyrifera tunics and 0.05%(W/V) of S. clava tunics.

• 한국의상디자인학회지
• /
• 제9권2호
• /
• pp.85-92
• /
• 2007

This study focused on bean-juice treatment method which have dyeing property to indigo, yellow soil, sappan wood, cochineal and also on the possibility of applying to mordanting. This is different from the active mordanting using chemicals. Natural mordants with development of dyeing are not harmful, also are the medicines for disease. Limestone and ash neutralize the acidic soil. bean-juice protein adhere to cellulose surface and change the physical properties of protein so that coloring of dye is better than before and film non-soluble in water is made. Therefore the color made from bean-juice process lasts after washing. This study try to show one of the ways to improve the current method using the heavy metal which can have bad effects for environment and human being. Bean-juice(raw bean, heated bean) treatment method can be the way to fix the natural dyeing problem of bad dyeing. Bean-juice had been treated under various condition with pre-treatment, post-treatment and raw bean, heated bean. Following results are obtained in this study. In the case of Indigo dyeing, pre-treatment of heated bean shows the biggest difference of color. In the case of yellow soil dyeing, pre-treatment of raw bean-juice shows the biggest gap of color. Pre-treatment of heated bean in sappan wood dyeing case and post-treatment of raw bean show bigger color difference than pre-treatment of raw bean. In cochineal dyeing, raw bean pre-treatment shows the biggest color difference.

• 한국의류학회지
• /
• 제37권7호
• /
• pp.874-881
• /
• 2013

Dansam (Salvia miltiorrhiza Bunge) is a perennial plant that belongs to the Labiatae family and is characterized by red pigment found in the epidermis of its roots. Research on the dyeability of Dansam extract was performed with repeated trials under various conditions such as temperature, time, and mordant treatment. Silk fabrics were dyed with Dansam extract and mordanted with various agents such as Al, Fe, Cu, and Sn to evaluate the dyeability and functionality of Dansam extract; subsequently, the K/S value and the change of surface color were analyzed using a colorimeter. In addition, the dyeability of dyed fabrics (such as color fastness to washing, dry cleaning fastness, rubbing fastness and light fastness) and functionality (such as antibacterial activity and deodorization) were analyzed. The surface colors of all dyed fabrics were recorded and the results showed the presence of mostly YR series of colors; in addition, a GY color series appeared in the Fe pre-mordants of the silk fabric. The highest K/S values were recorded in Fe post-mordants. The washing fastness were Level 3 and Level 4; in addition, the dry-cleaning fastness showed excellent results at Level 4 and Level 5. The rubbing fastness was satisfactory at Level 3 and Level 4 and the light fastness was satisfactory at Level 4. The results of the measurements (that pertained to the antibacterial activity of fabrics dyed with Dansam extract) showed a 99.9% bacteria reduction rate of Staphylococcus aureus and Klebsiella pneumoniae. In regards to deodorization ability, dyed fabrics were found to have higher deodorization rates than those not dyed. The dyed fabric demonstrated exceptional deodorization qualities.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.72-72
• /
• 2012

본 연구에서는 친환경 리싸이클 섬유산업의 활성화를 위해 대학생들의 리싸이클 폴리에스터 섬유에 대한 인식도를 분석해 보고자 하였다. 측정 문항은 섬유전문가 3인의 검토를 거쳐 타당성을 확보하였으며, 조사는 질문지법으로 2011년 9월 1일부터 9월 10일까지 대전 거주 대학생을 대상으로 진행하였으며, 회수된 설문지 196부를 자료 분석에 이용하였고, SPSS 19 통계 패키지를 이용하여 자료를 통계분석하였다. 연구 결과는 다음과 같다. 1. 친환경적 의생활 실태 조사를 실시한 결과, 리싸이클 PET섬유에 대해 들어본 적이 있는 사람은 조사대상자의 27.6%로 나타났고, 그 정보원으로는 인터넷을 가장 많이 이용하는 것으로 나타났다. 2. 섬유소재별 친환경성에 대한 인식도를 조사한 결과, 대학생들은 리싸이클 PET섬유가 천연섬유보다 덜 친환경적이나, 인조섬유보다는 더 친환경적이라고 인식하는 것으로 나타났다. 3. 리싸이클 PET섬유에 대한 인식도를 요인분석한 결과, <친환경성 요인>, <촉감 요인>, <내구성 요인>, <기능성 요인>, <공정 요인>, <글로벌 경쟁력 요인>및 <부가가치성 요인> 등 7개의 요인이 도출되었는데 이는 대학생들은 리싸이클 PET섬유에 대해 친환경성, 촉감, 내구성, 기능성, 공정, 글로벌경쟁력, 부가가치성순으로 중요하게 인식하는 것으로 해석된다.