• Journal of Convergence for Information Technology
• /
• v.10 no.10
• /
• pp.115-122
• /
• 2020

Due to the climate change, torrential rain downpours unprecedentedly, and urban areas repeatedly suffer from the inundation damages, which cause miserable loss of property and life by flooding. Two major reasons of urban flooding are river inundation and inland submergence. However, most of previous studies ignored the comprehensive mechanism of those two factors, and showed discrepancy and inadequacy due to the linear summation of each analysis result. In this study, river inundation and inland flooding were analyzed at the same time. Petrov-stabilizing scheme was adopted to capture the shock wave accurately by which river inundation can be modularized. In addition, flux-blocking alrotithm was introduced to handle the wet and dry phenomena. Sink/source terms with EGR (Exponentially Growth Rate) concept were incorporated to the shallow water equations to consider inland flooding. Comprehensive simulation implementing inland flooding and river inundation at the same time produced satisfactory results because it can reflect the counterbalancing and superposition effects, which provided accurate prediction in flooding analysis.

• Applied Microscopy
• /
• v.41 no.1
• /
• pp.21-29
• /
• 2011

Balneotherapy has been widely used for the treatment of skin diseases in the world. The purpose of this study was to determine the bath effect of the alkaline reduced spring water with the properties of high pH and low oxidation reduction potential (ORP) on the skin injury induced by ultra violet (UV) irradiation. For this purpose, hairless mice were irradiated with UV-B to cause skin injury, and individually taken a bath in spring water (experimental group) and tap water (control group) once a day for 40 min during 21 days. We observed histological changes of the back skin through macro- and microscopic methods compared to the control group. We found that skin injury of the experimental group was more quickly recovered than that of the control group. Under the light microscope, the experimental group showed that epidermal thickening (p<0.01) and the mast cell activation (p<0.001) were lower compared with the control group, in addition infiltration of inflammatory cells and degranulation of mast cells were less observed. These results suggest that regular bath in the spring water with the properties of high pH and low ORP has a positive effect on the skin injury induced by UV irradiation.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.4
• /
• pp.255-260
• /
• 2008

This study was performed to investigate the enhancement of UV-protection activities and skin-whitening effects from Angelica gigas Nakai extracts on ultra high pressure extraction process. Extraction at $60^{\circ}C$ treated by ultra high pressure for 15 minute and associated with ultrasofication (HPE15) was showed more than double yield, compare conventional extraction, as 12.24% (w/w) from A. gigas. Extracts of HPE15 reduced expression of MMP-1 on UV-irradiated CCD-986sk cells as 122.2% and revealed high inhibitory potency on tyrosinase as 69.4% by adding samples. Extracts of HPE15 from A. gigas showed strong inhibition effect on melanin production test by Clone M-3 cells as 82.4% by adding extracts. From the preliminary observations, we considered that the extracts from A. gigas could be potent natural materials for skin-whitening agent, and could be used as a potential anti-aging agent for the photo-damaged skin.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.3
• /
• pp.214-220
• /
• 1993

Browning of ascidian, Halocynthia roretzi, meat occurres very rapidly when skinned off or cut during processing and it resulted the quality loss of fresh frozen, dehydrated or fermented products. In this study, the causes of color development and prevention of browning were experimented. The browning of ascidian meat may be occurred enzymatically by a tyrosinase contained in meat and viscera which acted specifically on L-tyrosine as a substrate rather than on catechol. Activity of the enzyme in viscera was three times higher than in meat. The optimum pH and temperature on the tyrosinase activity of crude enzyme obtained from ascidian was 6.0 and $30{\sim}35^{\circ}C$, respectively. The enzyme was inactivated heating at $80^{\circ}C$ for 3 minutes or $90{\sim}100^{\circ}C$ for 1 minute and it was inhibited by $0.1{\sim}0.5mM$ solutions at ascorbic acid, sodium hydrogen sulfite, cystein, citric acid, cyanide but only sodium hydrogen sulfite treatment was effective to retard such a high content of enzyme as in case of viscera. In practical use for processing of ascidian meat browning was retarded by dipping the viscera removed ascidian meat in 0.2M citric acid for 5 minutes or $0.2\%$ sodium hydrogen sulfite solution for 1 minute resulting in sulfur dioxide residue less than 100 ppm.

• Journal of the Korean Society of Radiology
• /
• v.5 no.5
• /
• pp.237-244
• /
• 2011

Generally, X-ray examinations for dentistry use low energy radiation. It explains that the radiations are mainly absorbed to a human body because of the weak permeability. We made up some counterplans for decrease in radiation exposure, when guardians and radiologists are overexposed owing to unavoidable circumstances. The equipments for the test are GX-770 and CRANEX TOME CEPH which are used for various exams. Besides we measured the radiations in the projection room and in the control room using model 2026c and 20X6-1800. According to the test, the measurement value in the control room was low dose below $20{\mu}R$, the maximum dose in the projection room was $702.8{\mu}R$ and the measurement value of back dose was higher than lateral one. As the result, if we use a shielding door, it's effective for radioprotection and when we didn't prepare protectors, we should secure appropriate distance and be situated at the side area($90{\sim}135^{\circ}$) on the basis of centeral radiation. That way will provide valuable aid for radioprotection.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.249-254
• /
• 2003

분석에 이용된 격자망은 동곡, 고로, 미성, 병천, 효령 및 무성지점에 각각 12개, 30개, 45개, 76개, 46개 및 1265개의 조격자를 구성하였으며 하천의 수로방향 및 경사형태를 세분화하기 위하여 각 지점에 대하여 8개, 24개, 24개, 44개, 12개 및 64개의 세격자로 분할하였다. AGNPS를 이용한 첨두유량의 모의발생 결과치가 동곡, 고로, 미성, 병천, 효령 및 무성지점에서 측정값과 비교하여 각 호우사상별로 상대오차가 1.0~25.0%, 4.0~27.0%, 7.0~29.2%, 2.0~23.9%, 3.0~25.0% 및 3.6~21.0%의 차이를 나타내었다. 분석결과에서 AMCII조건에서는 관측치와 분석결과치가 유사하게 나타났으나 AMCI조건에 대해서는 상대적으로 작은 값을 보였으며 AMCIII조건에서는 다소 큰 값으로 분석되었다. SCS방법에서 제안하는 AMC조건별 CN값을 우리 실정에 적합하도록 수정 보완하기 위한 수정 유출곡선지수 $CN_{m}$ /I과 $CN_{m}$/III을 재구성하였으며, 여기에 적용되는 수정 유출 곡선지수식의 계수 a를 추정한 결과, 기왕에 발표된 연구결과와 거의 일치된 경향을 나타내었다. 제안된 수정 CN식을 이용하여 산정한 결과치와 관측치는 거의 유사하게 나타났다. AGNPS모델에 의한 유출량 산정에 있어 수문학적 토양피복형수(CN)의 결정을 위하여 선행강우량과 토양의 공극율 및 지형인자인 각 셀마다의 유역경사를 이용하여 관계식(CN =f($X_1$, $X_2$, $X_3$))을 유도하였으며, 분석 결과에서 CN이 선행강우량과 가장 밀접한 관계가 있음을 알 수 있었으며 유역경사, 토양의 공극율 순으로 나타났다..88mg/$\ell$~의 범위로 나타났다. 무태교 지점에서의 총인의 농도는 0.52mg/$\ell$~0.99mg/$\ell$~의 범위이었다. 신천에 금호강물을 혼합한 이후에도 부유물질, 생화학적산소요구량, 암모니아태 질소, 총인 등의 농도가 개선되지 않았다. 즉 금호강물의 혼합은 신천수질환경사업소에서 배출되는 방류수에 함유되어 있을 2차 오염물질의 희석이라는 이점외의 수질개선효과는 확인되지 않았다.l years and a new type of transfer crane has been developed. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On the basis of the simplified model, the simulation was performed and the results co

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.05a
• /
• pp.292-296
• /
• 2003

Autoclaving처리를 하지 않은 키토산과 autoclaving처리한 키토산과의 중금속 흡착실험을 해 본 결과 다음과 같은 결과를 도출 할 수 있었다. 1) 먼저 중금속간의 흡착능을 고찰하기 위하여 Langmuir와 Freundlich 흉착등온식에 적용시켜 본 결과 Freundlich 흡착등온식 보다는 Langmuir 흡착등온식이 보다 적합한 것으로 나타났다. 2) 시간에 따라서 autoclaving 처리한 키토산의 중금속 제거 가능성과 그 효율을 검토하기 위하여 각 중금속간의 Langmuir 흡착등온식을 이용하여 $q_{max}$를 나타냈다. 15 min > 60 min > 0 min 순으로 모든 중금속 제거 실험에서 15 min 동안 autoclaving 처리한 키토산의 중금속 흡착량이 가장 높은 것으로 나왔다. 그러므로 기존의 키토산 보다는 15 min동안 autoclaving 처리한 키토산이 중금속 제거에 더 좋은 흡착제로써 역할을 할 수 있을 것으로 판단된다. 3) 키토산을 이용한 중금속 제거에서는 $Pb^{2+}$ > $Cd^{2+}$ > $Cu^{2+}$ > $Cr^{3+}$순서로 제거가 되었다. 여러 연구자들의 실험 결과를 종합해 볼 때 Pb$^{2+}$가 중금속 중에 제거가 잘 된다는 연구 결과가 많이 발표 되었으며, $Cd^{2+}$, $Cu^{2+}$, $Cr^{3+}$의 경우에는 흡착제의 종류에 따라서 제거되는 순서가 다르다는 연구 결과들이 보고 되고 있다. 그러나 어떠한 이유로 중금속의 제거에 차이가 있는지에 대해서는 명확한 결론이 내려져 있지 않는 실정이다. 이러한 중금속간의 경쟁적인 관계에 대해 더 많은 세밀한 연구가 이루어져야 할 것 같다.는 0.52mg/$\ell$~0.99mg/$\ell$~의 범위이었다. 신천에 금호강물을 혼합한 이후에도 부유물질, 생화학적산소요구량, 암모니아태 질소, 총인 등의 농도가 개선되지 않았다. 즉 금호강물의 혼합은 신천수질환경사업소에서 배출되는 방류수에 함유되어 있을 2차 오염물질의 희석이라는 이점외의 수질개선효과는 확인되지 않았다.l years and a new type of transfer crane has been developed. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On the basis of the simplified model, the simulation was performed and the results could be confirmed by the experiments under various conditions.뢰, 결속 등 다차원의 개념에 대한 심도 깊은 연구와 최근 제기되고 있는 이론

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.1
• /
• pp.35-40
• /
• 2008

Using a small pilot coating pan, red clover and tall fescue seeds were coated under different rotating speed of pan(20, 30, 40, 45, 55, 60 rpm) for standardization of seed coating. Vermiculite was used as particulate matter and polyvinyl alcohol as adhesive for the coating of seeds. Coating index was calculated based on the percent singles out, percent agglomerates out, weight of particulate matter fine, percent friability, and average weight per 100 seeds to evaluate the physical characteristics of coated seeds. The coated seed of red clover under 45 rpm rotating speed of pan, was best in terms of percent singles out, percent agglomerates out, weight of fines, and average 100 seed weight. The coated seed of tall fescue under 40 rpm rotating speed of pan, showed highest percent singles out, lowest percent agglomerates out, lowest weight of fines, and heaviest average 100 seed weight. Excellent coating results were obtained with the pan speed of 45rpm for red clover and 40 rpm for tall fescue seeds. As rotatory speed of coating pan affected much to the physical characteristics of coated seeds, standardization of the speed is required before seed coating.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.179-186
• /
• 2004

Introduction of wave model, considered the effect of shoaling, refraction, diffraction, partial reflection, bottom friction, breaking at the coastal waters of complex bathymetry, is a very important factor for most coastal engineering design and disaster prevention problems. As waves move from deeper waters to shallow coastal waters, the fundamental wave parameters will change and the wave energy is redistributed along wave crests due to the depth variation, the presence of islands, coastal protection structures, irregularities of the enclosing shore boundaries, and other geological features. Moreover, waves undergo severe change inside the surf zone where wave breaking occurs and in the regions where reflected waves from coastline and structural boundaries interact with the incident waves. Therefore, the application of mild-slope equation model in this field would help for understanding of wave transformation mechanism where many other models could not deal with up to now. The purpose of this study is to form a extended mild-slope equation wave model and make comparison and analysis on variation of harbor responses in the vicinities of Pohang Old Harbor and Pohang New Port, etc. due to construction of New Port in Youngil Bay. This type of trial might be a milestone for port development in macroscale, where the induced impact analysis in the existing port due to the developemnt could be easily neglected.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.527-537
• /
• 2003

The characteristics of ship induced waves caused by navigation become widely different from both ship's speed and water depth condition. The ship induced waves specially generated in coastwise routes frequently give rise to call unforeseen danger for swimmers and small boats as well as shoreline erosion or sea wall destruction in coastal zones. The main concern of ship induced wave study until now is either how to reduce ship resistance or how to manoeuvre the ship safely under a constant water depth in the view point of shipbuilding engineers. Moreover, due to the trends for appearance of the high speed ships at the shallow coastal water, we are confronted with the danger of damages from those ship induced waves. Therefore, it is necessary to examine the development of ship induced waves and the influence of their deformation effects according to its propagation ray. In present study, in order to predict the development of the ship induced waves and their propagation under the conditions of complicate and variable shallow water depth with varying ship's speed, we constructed a computer model using Boussinesq equation with a fixed coordinate system and verified the model results by comparison with experimental results. Additionally, the model was applied under the variable water depth based on actual passage and we then confirmed the importance of the variable water depth consideration.