• Tunnel and Underground Space
• /
• v.31 no.4
• /
• pp.289-308
• /
• 2021

This study conducts coupled thermo-hydro-mechanical numerical modeling to investigate the maximum temperature and conditions for securing mechanical stability of the high-level radioactive waste repository when temperature criteria of bentonite buffer are 100℃ and 125℃, respectively. In case of temperature criterion of buffer as 100℃, the maximum temperatures at the interface between canister and buffer are calculated to be 99.4℃ and 99.8℃, respectively for a case with disposal tunnel spacing of 40 m and deposition hole spacing of 5.5 m and for the other case with disposal tunnel spacing of 30 m and deposition hole spacing of 6.5 m. In case of temperature criterion of buffer as 125℃, spacings of disposal tunnel and deposition hole could be decreased to 30 m and 4.5 m, respectively, which reduces the disposal area up to 55% compared to the disposal area of KRS⁺. According to analysis of mechanical stability for various disposal spacings, RMR of rock mass for KRS⁺ should be larger than 72.4 which belongs to good rock in RMR classification to prevent failure of rock mass. As disposal spacing is decreased, required RMR of rock mass is increased. In order to prevent failure of rock mass for a case with disposal tunnel spacing of 30 m and deposition hole spacing of 4.5 m, RMR larger than 87.3 is needed. However, mechanical stability of the repository is secured for all cases with RMR over 75 considering the enhancement of rock strength due to confining stress induced by swelling of the bentonite buffer and backfill.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.3
• /
• pp.201-209
• /
• 2015

Currently, 23 nuclear power plants are in operation at Kori, Uljin, Younggwang and Wolsong site and a reference deep geological disposal system has been developed for the spent fuels generated by them. The reference spent fuel for this disposal system has 4.5wt% of initial enrichment, 55 GWd/MtU of burn-up, and 40 years of cooling time. In this paper, to improve disposal efficiency and economic feasibility, the characteristics of spent fuels from nuclear power plants, such as type and burn-up, were reviewed. A disposal canister concept for shorter length and relatively lower burn-up spent fuels than the reference spent fuels was developed. Based on this canister concept, thermal analyses were carried out and a deep geological disposal concept was proposed. Measures of disposal efficiency such as unit disposal area and disposal density were compared between this disposal system and the reference disposal system. Also, economic feasibility, such as the volume reduction of copper, cast iron, and bentonite, was analyzed and the results of these analyses showed that the disposal system proposed in this paper has an efficiency of at least 20%. These results could be used for establishing spent fuel management policy and designing practical disposal systems for spent fuels.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.65-78
• /
• 2007

The pollutants (Rn, CH, CO, HS, radioactive gas from radiolysis) were generated from the process of construction and operation of underground repository, and after disposal of low-intermediate radioactive waste inside there must be controlled by a ventilation system to distribute them in area where enough air is supported. Therefore, a suitable technical approach is needed especially at an underground repository that is equipped with many entry tunnels, storage tunnels, exhaust-blowing tunnels, and vertical shafts in complicated network form. For the technical approach of such a ventilation system, WIPP (Waste Isolation Pilot Plant) in U. S and SFR (Slutforvar for Reaktorafall) low-intermediate radioactive waste repository in Sweden were selected as the models, for calculating the required air quantity, organizing a ventilation network considering cross section, length, surface roughness of the air passage, and describing a calculation of resistance of each circuit. Based on these procedures, a best suited ventilation system was completed with designing proper capacity of fans and operating plan of vertical shafts. As a result of comparing the two repositories based on the geometry dimensions and ventilation facility equipment operation, more parallel circuit as in WIPP, brought decrease in resistance for entire system leading to reduce of operating costs, and the larger cross-sectional area of the SFR, the greater the percentage of disposal capacity. Accordingly, the mixture of parallel circuit of WIPP repository for reducing resistance and SFR repository formation for enlargement of disposal capacity would be the most rational and efficient ventilation system.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.2
• /
• pp.151-159
• /
• 2017

A deep geological disposal at a depth of 500 m in stable host rock is considered to be the safest method with current technologies for disposal of spent fuels classified as high-level radioactive waste. The most important requirement is that the temperature of the bentonite buffer, which is a component of the engineered barrier, should not exceed $100^{\circ}C$. In Korea, the amount of spent fuel generated by nuclear power generation, which accounts for about 30% of the total electricity, is continuously increasing and accumulating. Accordingly, the area required to dispose of it is also increasing. In this study, various duplex disposal concepts were derived for the purpose of improving the disposal efficiency by reducing the disposal area. Based on these concepts, thermal analyses were carried out to confirm whether the critical disposal system requirements were met, and the thermal stability of the disposal system was evaluated by analyzing the results. The results showed that upward 75 m or downward 75 m apart from the reference disposal system location of 500 m depth would qualify for the double layered disposal concept. The results of this study can be applied to the establishment of spent fuel management policy and the design of practical commercial disposal system. Detailed analyses with data of a real disposal site are necessary.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.5
• /
• pp.381-390
• /
• 2009

In this paper, a complementary analysis for the structural safety evaluation of the spent nuclear fuel disposal canister developed for the Canadian Deuterium and Uranium(CANDU) reactor for about 10,000 years long term deposition at a 500m deep granitic bedrock repository has been performed. However this developed structural model of the spent nuclear fuel disposal canister which has 33 spent nuclear fuel baskets and whose diameter is 122cm is too heavy to handle without any structural safety problem. Hence a lighter structural model of the spent nuclear fuel disposal canister which is easy to handle has been required to develop very much. There are two methods to reduce the weight of the CANDU canister model. The one is to alleviate severe design conditions such as external loads and safety factor. The other is to optimize the cross section shape of the canister by reducing the spent nuclear fuel basket number. Hence, in this paper a complementary analysis to alleviate such severe design conditions is carried out and simultaneously structural analyses to optimize the cross section shape of the canister by reducing the spent nuclear fuel basket number below 33 are carried out by varying the external load and the canister diameter for the reduction of the canister weight. The complementary analysis results show that the diameter of canister can be shortened below 122cm to reduce the weight of the spent nuclear fuel disposal canister.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.4
• /
• pp.413-421
• /
• 2004

In this paper, a structural analysis for the pressurized water reactor(PWR) spent nuclear fuel disposal canister which is deposited under the 500m deep underground is carried out to predict the creep deformation of the canister while the underground water and swelling bentonite pressure are applied on the canister. Usually the creep deformation may be caused due to the Pressure and the high heat applied to the canister even though additional external loads are not applied to the canister. These creep deformations depend on the time. In this paper, oかy the underground water and bentonite swelling Pressure are considered for the creep deformation analysis of the canister, because the heat distribution inside canister due the spent fuel is not simple and depends on time. A proper creep function is adopted for the creep analysis. The creep analysis is carried out during $10^8$ seconds. The creep analysis results show that the creep strains are very small and these strains occur usually in the lid and bottom of the canister not in the cast iron insert. A much smaller strain is found in the cast iron insert. Hence, the creep deformation doesn't affect the structural safety of the canister, and also the creep stress which shows the stress relaxation phenomenon doesn't affect the structural safety of the canister.

• Tunnel and Underground Space
• /
• v.18 no.3
• /
• pp.165-174
• /
• 2008

Thermo-hydro-chemico-mechanical evolution of the radioactive waste repository and surrounding geological media is one of the key issues for the radioactive waste disposal. This article describes not only the basic context for the site selection but also a reasonable strategy for the repository related research based on the results of the French repository project carried out by ANDRA (National radioactive waste management agency). To have some alternatives for the determination of a preferable depth and geological media, it would be recommendable to establish a database system. The curing process of the fractures or microfissures in the EDZ (Excavation Disturbed Zone) during operation time has to be examined considering the evolution of the EDZ and the reversibility of the repository. It is prerequisite to carry out a feasibility study and to validate the design concept and design parameters in a properly constructed underground research laboratory (URL) in Korea.

• Economic and Environmental Geology
• /
• v.56 no.5
• /
• pp.565-580
• /
• 2023

In this study, we reviewed and summarized comprehensive roles and importance of natural analogue studies for demonstrating the safety and improving the reliability of the safety for the deep geological disposal of high-level radioactive waste. We also investigated domestic and foreign status of natural analogue studies in order to study and substantiate complex and various radionuclide behaviors in subsurface disposal environments. In addition, we investigated and uranium behaviors in groundwater and rock in uranium deposits including domestic uranium deposits in Ogcheon Metamorphic Belt and biogeochemical interactions in geological environments. Although there are many limitations and uncertainties in directly using the information and data for uranium behaviors obtained from uranium deposits in the disposal safety assessment, the information and data can be utilized in the disposal safety assessment and safety case construction both in qualitative and partly quantitative ways.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2001.11a
• /
• pp.331-336
• /
• 2001

한국원자력연구소에서는 고준위 방사성폐기물 처분 시스템의 안전성을 투명하게평가하기 위한 방안의 하나로 처분 안전성 관련 시나리오와 구성 요소들인 FEP, 그리고 각 시나리오 별 안전성 평가 방안들을 종합한 프로그램인 FEAS를 개발하고 있다. 고준위 방사성 폐기물 처분 연구는 관련 전문가 뿐 아니라 일반 국민들도 안전성에 관해 많은 관심을 표명하고 있는 바 현재 국내에서 고려하고 있는 처분 개념은 무엇이며 처분장 안전성 평가를 위해서 고려하고 있는 제 사건들은 무엇이며 이들 시나리오를 구성하는 세부 사건들은 무엇인가에 관한 합의를 도출하고 이와 관련된 기록들을 보존하고 각각 세부 사건들에 관해 현재의 평가 방안과 데이터 수집 현황 그리고 해외 사례 등을 체계적으로 정리하는 일은 중요하다. 현재 개발되고 있는 FEAS는 이와 같은 역할을 수행할 뿐 아니라 이 프로그램과 동시에 개발되고 있는 입력 자료 데이터 시스템, 웹을 기반으로 한 품질 보증 체제 및 안전성 평가 방안 등과 향후 연계되어 모든 국민들이 방사성 폐기물 처분장의 안전성을 쉽게 이해할 수 있는 수단으로 확장될 예정이다.

• Journal of Families and Better Life
• /
• v.13 no.2
• /
• pp.22-34
• /
• 1995

본 연구의 목적은 이론적 고찰을 토대로 환경문제와 직결된 소비자들의 가사용 내 구재처분행동유형과 이에 영향을 미치는 제변수들과의 관계를 실증분석을 통해 파악하고자 함이다 연구대상은 분당.일산지역에 거주하는 주부600명이며 최종분석에 사용된 자료수는 512부이다 연구결과 재활용 처분행동중 이타적 처분행동이 많은 비율로나타났으며 가구류가 전자제품류부다 폐기율이 높은 것으로 나타났다 그리고 처분-행동유형은 인구통계적 변수 와 환경문제에 관한 의식과 의미있는 관련이 있음을 보였으며 개인적 가치성향중에는 익사 회적 성향이 재활용 처분행동과 가장 깊은 관련이 있는 것으로 나타났다