Proceedings of the Korean Nuclear Society Conference
/
1998.05a
/
pp.590-595
/
1998
차세대 원자로(KNGR : Korea Next Generation Reactor)에는 새로운 안전개념으로서 피동형 안전주입탱크(Safety Injection Tank. SIT)의 도입을 고려하고 있는데, 이러한 피동형 유량조절기능은 안전주입탱크내의 유체기구(Fluidic device)인 볼텍스챔버(vortex chamber)에 의해 이루어진다. 볼텍스챔버는 내부에서 발생되는 와류강도에 따라 유동저항의 강도가 달라짐을 이용하여 유량을 피동적으로 조절할 수 있는 유체기구이다. 본 연구에서는 볼텍스챔버의 유동특성을 관찰하기 위하여 소규모 실험장치를 구축하고, 이를 이용하여 실험을 수행하였다. 본 연구는 두 단계로 수행되었다. 제1단계 실험에서는 볼텍스챔버의 기하학적 특성이 안전주입탱크의 안전주입수 방출특성에 미치는 영향에 대한 거시적 관점에서의 연구로서. 볼텍스챔버의 기하학적 변수(유입구 및 방출구의 직경)가 안전주입수의 방출과정에서 발생되는 SIT 내의수위 거동, 안전주입수의 방출유량 특성등에 미치는 영향에 대해 중점적으로 고찰하였다 제2단계 실험에서는 1단계 실험에서 관찰된 안전주입탱크의 여러 가지 방출특성과 볼텍스챔버 내부 유동장의 유동특성과의 관련성을 규명하기 위해 PIV (Particle Image Velocimetry)를 이용하여 볼텍스챔버의 기하학적 변수에 따른 유동장 내부의 국소 유속분포를 측정하였다.
설계변경된 sector 챔버를 제작하고 저장링 챔버로서 성능을 알기 위하여 각종 진공실험을 하였 다. 가스방출률은 낮은 10-13 Torr.1/sec/cm2 이고 누설률은 1-10-10 Torr.1/sec 이하이며 2회 ba-keout과 NEG활성화후 얻어진 최종진공도는 낮은 10-11 Torr이었다.이러한 결과는 저장링 sector 챔버으 진공요 구조건을 충분히 만족시킨다.
Journal of the Korea Academia-Industrial cooperation Society
/
v.6
no.4
/
pp.302-308
/
2005
The temperature distribution and fluid flow in the chamber was investigated using FLUENT code. It provides comprehensive modeling capabilities for a wide range of incompressible or compressible and laminar or turbulent fluid flow problems. And a broad range of mathematical models for transport phenomena is combined with the ability to model for complex geometries. The geometry of the chamber was very complex, and a simplified model of the chamber was used in the simulation experiment. It was important that the temperature deviation of test site. This datum were provided in the improving the control algorithm. Using this algorithm, the results were with in $0.1^{\circ}C.$
Proceedings of the Korean Society of Disaster Information Conference
/
2023.11a
/
pp.351-352
/
2023
동물용 고압산소치료 시 산소를 통한 가압은 이미 있는 공기를 제거하고 산소로 대치시키는데 효율성이 떨어져서 100%에 가까운 산소분압을 구현하는데 어려움이 있고, 그 방법도 표준화되지 않았다. 따라서 어떠한 방식의 산소가압이 신속하고 효율적으로 100%에 가까운 산소분압을 구현할 수 있는지에 대한 방안을 개발하고 표준화할 필요가 있다. 동물용 고압산소치료를 활용한 동물실험이나 동물의 치료 중 가압 단계에서 간헐적 환기 방법이 더 신속하게 100%에 가까운 산소 분압을 보이므로 향후 표준 지침 개발을 위한 중요한 기반 연구와 제안으로 활용 가능하다. 이는 재난 기반으로의 고압산소챔버의 활용을 위한 기초 자료가 될 것이다.
Journal of the Institute of Electronics and Information Engineers
/
v.51
no.10
/
pp.204-209
/
2014
The purpose of this study is to produce a simulator that can control a pulse pressure keeping the pulse wave transfer phenomenon. For this, the elastic tube is combined with a compliance chamber for the vessel part. The simulator is comprised of four parts; a pressure generation part with slider-crank mechanism, a vessel part with resistance controller, water reservoirs and a measurement part. The changes of waveform depending on the location of a chamber is examined to determine the position of a chamber. The effects of a chamber on the pulse pressure and the pulse wave transfer phenomenon were investigated. It showed that the simulator which had the chamber in upstream of tube produces pressure wave, being more similar to the clinical waveform than in downstream of tube. Furthermore, with the chamber, the simulator generates a pulse pressure, being more similar to the normal physiological values than without one. The chamber had little effect on the pulse wave velocity.
알루미늄 합금 진공챔버를 제작할 때 따르는 기밀 기술을 용접과 플랜지 이음 측면에서 해설하였다. 알루미늄 합금 재료 특성의 유리한 점 때문에 진공챔버로서의 그 사용이 증가하고 있으나, 챔버나 부품들을 제작할 때에 용접과 플랜지 이음에 상대적인 어려움이 있다. 진공 용접은 주로 TIG용접이며, 용접시에 가상누설을 최소화 하고 균열 방지를 위한 용접설계와 시공조건을 고려하는 것이 중요하다. 플랜지 이음에서는 알루미늄 콘플랫형과 금속오링을 사용하는 플랜지에 대하여 소개하였다. 이러한 기술은 앞으로 핵융합장치, 플라즈마 실험장치, 반도체 제조장비, 일반 초고진공장치에 응용될 것이다.
Proceedings of the Korea Air Pollution Research Association Conference
/
2003.11a
/
pp.239-240
/
2003
스모그 챔버는 대기 중 성분들의 화학 반응 기작을 연구하는데 사용되고 있다. 그러나, 기존 연구에서는 광화학 반응 전구물질의 농도가 실제 대기 농도보다 높고, 청정 공기에 연구 대상 전구물질만을 주입한 단순 혼합물을 이용하였으며, 여러 날에 걸쳐 반응이 진행된 성분들을 이용하지 않았다 (Dodge, 2000). 이와 달리 본 연구팀에서는 실내 스모그 챔버에 실제 대기를 도입하여 광화학 반응 실험을 수행하고 있다 (배귀남 등, 2003). 한 개의 스모그 챔버를 이용하는 경우 외기의 특성상 매 실험마다 초기조건이 달라지기 때문에 단일 인자의 차이에 따른 영향을 파악하기가 쉽지 않았다 (배귀남 등, 2003b). (중략)
Transactions of the Korean Society of Mechanical Engineers B
/
v.34
no.6
/
pp.599-606
/
2010
In the present study, actuators with diaphragms of different thickness and chambers of different diameter are fabricated to examine experimentally how the behavior characteristics of the actuator diaphragm in a thermopneumatic micropump are affected by diaphragm thickness and chamber diameter under various operating conditions with different values of input voltage and frequency. The actuator comprises a microheater set on Pyrex glass, a chamber, and a diaphragm. For all values of the input energy, as the frequency decreases below 10 Hz, the maximum center deflection of the diaphragm greatly increases irrespective of diaphragm thickness and chamber diameter. At low frequencies, as the heat energy supplied to the chamber increases, the center of deflection of the diaphragm increases; the magnitude of deflection is high for thin diaphragms and for diaphragms whose chambers have small diameters. At frequencies higher than 10 Hz, all the design variables such as diaphragm thickness, chamber diameter, and the input energy have negligible effect on the center deflection of the diaphragm.
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.209-209
/
2011
플라즈마 공정에 있어 챔버 및 웨이퍼의 표면 상태변화는 공정 결과에 큰 영향을 끼치게 된다. 챔버 표면에 대한 연구는 많이 진행되어 있지만 대부분의 연구가 챔버 표면에서 일어나는 화학적 반응에 초점을 맞추고 있다. 본 연구에서는 플라즈마 상태 변화에 따른 챔버 표면물질의 전기적 특성 변화를 관찰하였다. 프로브 표면에 Al2O3로 코팅을 하고 플라즈마에 삽입 후 AC 하모닉법을 이용하여 실시간으로 표면의 축전용량을 측정하였다. 그 결과 표면의 축전용량은 플라즈마에 인가한 전력과 표면이 플라즈마에 노출된 시간에 따라 변하는 것이 관찰되었다. 플라즈마에 인가된 전력이 증가되면 처음에는 급격이 축전용량이 증가하였고, 그 후 시간이 지날수록 천천히 수렴되었다. 유전물질의 축전용량은 그 물질의 온도와 연관이 있다. 실험 결과로 미루어 보았을 때, 플라즈마에서의 표면의 축전용량의 변화는 플라즈마로부터 표면으로의 열전달에 의한 표면의 온도 변화에 의한 것으로 이해할 수 있다. 특히, 쉬스에서 가속되는 이온의 포격에 의해 표면 격자가 크게 진동하면서서 일반적인 온도 변화에 의한 축전용량의 변화보다 더 큰 변화가 일어난 것으로 추정된다. 공정에 사용되는 많은 챔버의 표면이나 전극의 표면은 유전체로 코팅되어 있다. 이 유전체의 특성이 온도에 의해 변하게 되면 챔버의 전기적인 특성이 변하게 되어 임피던스 매칭 조건에 변화를 가져온다. 그 결과 플라즈마의 특성도 바뀌게 되어 공정 결과에 영향을 미치게 된다. 그러므로 챔버 표면의 유전특성을 관찰하고 제어하는 것이 플라즈마의 특성을 유지시키는데 중요하다고 할 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.