• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.175-180
• /
• 2010

In the almost application parts, GNSS being used the primary navigation system on world-widely. However, some of nations attempt or deliberate to enhance current Loran system, as a backup to satellite navigation system because of the vulnerability to the disturbance signal. Loran interests in supplemental navigation system by the development and enhancement, which is called eLoran, and that consists of advancement of receiver and transmitter and of differential Loran in order to increase the accuracy of current Loran-C. A significant factor limiting the ranging accuracy of the eLoran signal is the ASF in the TOAs observed by the receiver. The ASF is mostly due to the fact that the ground-wave signal is likely to propagate over paths of varying conductivity and topography. This paper presents comparison results between the predicted ASF and the measured ASF in a southern east region of Korea. For predicting ASF, the Monteath model is used. Actual ASF is measured from the legacy Loran signal transmitted Pohang station in the GRI 9930 chain. The test results showed the repeatability of the measured ASF and the consistent characteristics between the predicted and the measured ASF values.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.7
• /
• pp.520-533
• /
• 2007

The CRM(Customer Relationship Management) is the business strategy model for higher profits and competitive power of the enterprise in a new business environment. The large-scale customer response service technique uses internet, e-mail, SMS (Short Message Service), Telephony service, DM(Direct Mail) by customer channel point. Recently, business model diversify for new contract and retaining existing customer to the effort for a profitable model of business. This paper is based on Avaya PDS(Predictive Dialing System) model for CRM bond center. If the number of "available" agents are less than the number of inbound channels, then there may be real-time response problems in PDS system implemented. The Organization cannot afford to have many agents in available mode because of the high cost of manpower. This paper provides two contributions to the study. First, we present Call Object Management Mechanism of Customer Channel integration for reduce outbound consulting and reduce CallBack data in the PDS. Second, we design and implement the proposed system. Our simulation results show analysis of old model and proposed model. The proposed model can be efficiently used in Large-scale CRM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1325-1341
• /
• 1998

A conventional CBR channel is now capable of delivering several digitally compressed video programs due to recent advances in video compression, such as MPEG-2, and digital transmission technology. This paper presents a joint video coding scheme that is to maintain a constant sum of bit rates for all the programs but to allow the variable bit rate for individual program in the transimission environment mentioned above. Thus advantages of VBR video compression can be obtained. This paper contributes in two aspects. First, a rate-distortion estimation method for MPEG-2 video is proposed, which enavle us predict the amount of bits and the distortion generated from an encoded picture at a given quantization step size and vice versa. The most attractive features of the proposed rate-distortion estimation method are its accuracy and a computational complexity low enough to be applied to real-time video coding applications. Second, this paper presents an efficient and accurate joint rate control scheme using the rate-distortion estimation results and verifies its performance with experiments. The experimental results show that our coding scheme gives a significant gain even though a small number of video programs are coded jointly. For example, a stable picture quality is maintained among the video programs as well as within a program, and additional extra programs can be transmitted over the same channel bandwidth if the proposed joint video coding scheme is used.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.1 s.307
• /
• pp.27-38
• /
• 2006

The main purpose of rate control is to achieve the highest video quality when bandwidth or storage capacity is limited. For this purpose, we need a rate control algorithm which is adaptively controlled by the motion information of sequences, scene change, buffer capacity and time-varing bandwitdh channels. A rate-control method in the encoder requires the accurate estimation of target bit for each frame and the low end-to-end delay for transmitting video data by intelligent selection of encoding parameters. In this paper, we suggest three kinds of linear relation in the encoder to satisfy the characteristics of rate control. The first relation is that between the percentage of zero quantized transformed coefficients(p) and coded bits. Second relation is that between the PSNR of encoded frame and its Quantization parameter(QP). Finally, we can find out a linear approximation between QP and p. According to the experimental analysis, the proposed method results in an efficient rate control in terms of the bit estimation, the buffer capacity, and PSNR compared with the existing rate control in the H.264 JM 9.3.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9C
• /
• pp.849-860
• /
• 2007

Because the H.264/AVC standard adopts the variable length coding algorithm, the rate of encoded video bitstream fluctuates a lot as time flows, though its compression efficiency is superior to that of existing standards. When a video is transmitted in real-time over networks with fixed low-bandwidth, it is necessary to control the bit rate which is generated from encoder. Many existing rate control algorithms have been adopting the quadratic rate-distortion model which determines the target bits for each frame. We propose a new rate control algorithm for H.264/AVC video transmission over networks with fixed bandwidth. The proposed algorithm predicts quantization parameter adaptively to reduce video distortion using the quadratic rate-distortion model, which uses the target bit rate and the mean absolute difference for current frame considering pixel difference between macroblocks in the previous and the current frame. On video samples with high motion and scene change cases, experimental results show that (1) the proposed algorithm adapts the encoded bitstream to limited channel capacity, while existing algorithms abruptly excess the limit bit rate; (2) the proposed algorithm improves picture quality with $0.4{\sim}0.9dB$ in average.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.26-39
• /
• 2007

In recent years, rate control is an important technique in real time video communication applications using H.264/AVC. Many existing rate control algorithms employ the quadratic rate-distortion model, which is determine the target bits for each P frame. In this paper, a new rate control algorithm for transmission of H.264/AVC video bit stream through CBR(Constant Bit Rate) channel is proposed. The proposed algorithm predicts an adaptive QP(Quantization Parameter) for improving video distortion, due to high motion and abruptly scene change, which target bit rate and MAD(Mean of Absolute Difference) for current frame considering image complexity variance between previous and current frames. Additionally, it uses frame skip technique to maintain bit stream within a manageable range and protect buffer from overflow or underflow. Experimental results show that the proposed method gives a quality improvement of about 0.5dB when compared to previous rate control algorithm. Also our proposed algorithm encodes the video sequences with less frame skipping compared to the existing rate control for H.264/AVC.

• Tunnel and Underground Space
• /
• v.20 no.2
• /
• pp.82-91
• /
• 2010

Grouting technology is one of the ground improvement methods used in water controlling and reinforcement of rock mass in underground structure construction. It is necessarily required to find out the characteristics of grout flow through discontinuities in a rock mass for an adequate grout design and performance assessment. Laminar flow is not always applicable in simulating a grout flow in a rock mass, since the rock joints usually have apertures at a micro-scale and the flow through these joints is affected by the joint roughness and the velocity profile of the flow changes partially near the roughness. Thus, the influence of joint roughness and aperture on the grout flow in rough rock joint was numerically investigated in this study. The commercial computational fluid dynamics code, FLUENT, was applied for this purpose. The computed results by embedded Herschel-Bulkley model and VOF (volume of fluid) model, which are applicable to simulate grout flow in a narrow rock joint that is filled with air and water, were well compared with that of analytical results and previously published laboratory test for the verification. The injection pressure required to keep constant injection rate of grout was calculated in a variety of Joint Roughness Coefficient (JRC) and aperture conditions, and the effect of joint roughness and aperture on grout flow were quantified.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.106-112
• /
• 2001

Unfortunately, the area without economical efficiency, especially the far distance sea, is much lower than that of a urban area-built-up area. It should be promoted the equivalent level to a urban area in the light of future-oriented universal service. Actually, Because propagation environment of mobile communication in the sea is greatly different from that for inland focused on built-up area, a propagation prediction model in the sea should be distinguished from inland-based one. Accordingly, the purpose of this study is to suggest the propagation prediction model for the sea service as a method to minimize unnecessary facilities investment and maintenance caused by additional or new building of a base station. If mobile phone service for far distance sea is provided by expanding limited communication zone of narrow band CDMA mobile communication whose spread band FA is 1.2288MHz. Suggested propagation prediction model includes five parameters to minimize facilities investment of a base station and maximize channel capacity: equivalent line of sight, chip delay by PN code, antenna altitude, power of base station and gain of antennas. Finally, suggested propagation prediction model is simulated and, the results are examined for its utility by comparing with loss of free space.

• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.375-381
• /
• 2013

In order to establish eLoran system it needs the betterment of a receiver and a transmitter, the add of data channel to loran pulse for loran system information and the differential Loran for compensating Loran-c signal. Precise ASF database map is essential if the Loran delivers the high absolute accuracy of navigation demanded at maritime harbor entrance. In this study we developed the ASF mapping method using predicted ASFs compensated by the measured ASFs for maritime in the harbor. Actual ASF is measured by the legacy Loran signal transmitted from Pohang station in the GRI 9930 chain. We measured absolute propagation delay between the Pohang transmitting station and the measurement points by comparing with the cesium clock for the calculation of the ASFs. Monteath model was used for the irregular terrain along the propagation path in the Yeongil Bay. We measured the actual ASFs at the 12 measurement points over the Yeongil Bay. In our ASF-mapping method we estimated that the each offsets between the predicted and the measured ASFs at the 12 spaced points in the Yeongil. We obtained the ASF map by adjusting the predicted ASF results to fit the measured ASFs over Yeungil bay.

• Information Systems Review
• /
• v.21 no.1
• /
• pp.23-38
• /
• 2019

The social network service (SNS) is one of the important marketing channels, so many companies actively exploit SNSs by posting SNS messages with appropriate content and style for their customers. In this paper, we focused on the psychological distances embedded in the SNS messages and developed a method to measure the psychological distance in SNS message by mixing a traditional content analysis, natural language processing (NLP), and machine learning. Through a traditional content analysis by human coding, the psychological distance was extracted from the SNS message, and these coding results were used for input data for NLP and machine learning. With NLP, word embedding was executed and Bag of Word was created. The Support Vector Machine, one of machine learning techniques was performed to train and test the psychological distance in SNS message. As a result, sensitivity and precision of SVM prediction were significantly low because of the extreme skewness of dataset. We improved the performance of SVM by balancing the ratio of data by upsampling technique and using data coded with the same value in first content analysis. All performance index was more than 70%, which showed that psychological distance can be measured well.