• 한국전자파학회논문지
• /
• 제27권11호
• /
• pp.1023-1026
• /
• 2016

우주 환경에서의 굴절률 변화를 고려하여 안테나의 전파 특성을 계산한다. 대류권, 성층권, 전리권의 유효 굴절률을 계산하고, 대기권을 통과하면서 굴절되고 감쇠되는 전파 특성을 계산하기 위해 광선 추적법, 기하광학법, 호이겐스의 원리를 이용한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.78-83
• /
• 2001

It's required mechanical properties of in-service facilities to maintain safety operation in power plants as well as chemical plants. In this study the four classes of the thermally aged 1Cr-1Mo-0.25V specimens were prepared using an artificially accelerated aging method at $630^{\circ}C$. Ultrasonic tests, tensile tests, $K_{IC}$ tests and hardness tests were performed in order to evaluate the degree of degradation of the material. The mechanical properties were decreased as degraded, but the attenuation coefficient and the harmonic generation level of a ultrasonic signal were increased. Expecially the nonlinear parameter of the signal is sensitive and will be a good parameter to evaluate the material degradation.

• 한국결정성장학회지
• /
• 제7권3호
• /
• pp.393-399
• /
• 1997

승화법에 의한 6H-SiC 단결정의 최적 성장조건을 설정하여 고품질의 6H-Sic 단결정을 성장하였다. 성장된 결정의 직경은 약 33 mm, 길이는 약 11 mm였다. 성장된 결정을 절단하여 연마한 후 광학현미경을 이용하여 연마된 SiC wafer의 micropipe density와 planar defect density를 측정한 결과, micropipe density는 400개/$ \textrm{cm}^2$이었고 planar defect density는 50개/$\textrm{cm}^2$이었다. 이 6H-SiC wafer와 기판으로 사용된 Acheson 결정의 결정성을 비교하기 위하여 Raman 분광법과 double crystal X-ray diffraction 분석법이 사용되었다. 이 분석에 의해 승화법에 의해 성장된 6H-SiC wafer가 Acheson seed보다 결정성이 우수하였다. Hall effect 측정법에 의해 불순물이 첨가되지 않은 6H-SiC wafer의 전기적인 특성을 측정하였으며 그 결과 캐리어 농도는 $3.91{\times}10^{15}/\textrm {cm}^3$이었고, n-type이었다.

• 대한기계학회논문집A
• /
• 제38권7호
• /
• pp.757-764
• /
• 2014

본 연구에서는 한계하중법을 이용하여 Curved CT 시험편의 J-적분에 미치는 형상변수 영향을 평가하였다. 주요 형상변수인 시험편의 길이와 폭의 비(L/W), 평균곡률반경과 두께의 비($R_m/t$)에 대한 파괴인성시험 후, ASTM 시험법에서 제시한 표준시험편의 J-적분과 한계하중법으로 구한 J-적분을 각각 적용하여 구한 파괴저항곡선을 평가하였다. 또한 배관의 파괴저항곡선을 잘 모사한다고 알려진 휨 광폭평판(CWP) 및 표준시험편의 파괴저항곡선과 비교 고찰하여 최종적으로 Curved CT 시험편의 파괴저항곡선에 대한 유효성을 평가하였다. 본 논문의 결과는 향후 실배관의 정확한 파괴인성을 평가하는 데 있어 Curved CT 시험편의 적용가능성을 평가하는 데에 활용할 수 있다.

• 대한기계학회논문집
• /
• 제16권6호
• /
• pp.1115-1120
• /
• 1992

본 연구에서는 ASTM의 단일시편법으로 시험해석할 때에 나타나는 가장 큰 문 제점인 균열길이 감소현상의 원인해석과, 균열길이 감소현상을 고려한 균열길이 측정 수정식을 제안하고자 하며, 다음 절차로 연구를 수행하였다. (1) 균열선단의 응력장해석과, 이 응력장해석에 의한 균열길이 감소현상을 해석하였 다. (2) CT와 TPB 시편에서의 균열길이 측정식의 수정식을 제안하였다. (3) 이 수정식의 타당성을 $J_{IC}$ 시험해석을 통하여 검토하였다.다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.7-10
• /
• 2007

In case of large steel water pipe, it have been observed that its fracture mostly occurs due to the complicated outside fatigue load on the pipe in the underground. It is also well known that its damage and leakage happen mainly in a weld zone. In this study we evaluated the fatigue characteristics based on size effect and residual stress by comparing the test results on the standard specimen collected from real pipe with those on full scale pipe.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.96-101
• /
• 1998

J-R curve tests were performed on 1T compact specimens of SA516 Gr. 70 carbon steels under reverse cyclic loading. A Direct-Current Potential Drop (DCPD) method, one of the nondestructive techniques to detect flaw of structure, is being increasingly used for monitoring crack initiation and stable crack growth in typical fracture mechanics specimens for J-R testing. In many aspects this method is simpler than the unloading compliance method. The objective of this paper is to evaluate the J-R Curve according to the crack length measurement techniques under reverse cyclic loading. In order to prove the reliability and repeatability of the DCPD method, the crack length measured by using DCPD method was compared to one determined from unloading compliance. Consequently, this DCPD method correlated well with J-R curves and crack extension measurements determined from unloading compliance method.

• 대한인간공학회지
• /
• 제17권3호
• /
• pp.71-80
• /
• 1998

This study proposed a method to apply certain fuzzy-related Quality control concepts to design customer-oriented products considering user requirements and information starting with the product development stage. This approach showed how to define the importance level of design elements and how to Quantify complex subjective perception of products using the fuzzy linguistic rating method and quality function deployment concepts. Using this approach, various customer requirements could be interpreted and reflected on the early design phase of a new product. To validate the proposed method, an experiment was conducted for designing the shape of the beeper using 14 subjects and 10 commercial beeper products. Front area, width/length ratio, thickness, curve variance, weight, and display area were selected as design elements of the beeper. The results showed that among design elements, front area and weight are significantly related with the subjective perception of the products. Consequently, this study indicates that customer decision on product selection could be made by quantification of user perception for beeper products.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.397-402
• /
• 2003

Fracture resistance curves for concerned materials are required in order to perform elastic-plastic fracture mechanical analyses. Fracture resistance curve is built with J-integral values and crack extension values. The objective of this paper is to apply the load ratio method to the measurement of the crack length for the real scale pipe specimen. For these, the fracture test using the real scale pipe specimen and finite element analyses were performed. A 4-point bending jig was manufactured for the pipe test and the direct current potential drop method and the load ratio method was used to measure the crack extension and the length for the real scale pipe test. Finite element analyses about the compliance of the pipe specimen were executed for applying the load ratio method according to the crack length.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.328-333
• /
• 2003

The purpose of this study is to analyze the impact of shot peening angle on residual stress distribution. From the residual stress analysis of perpendicular shot peening, it could be known that the residual stress in the case of high velocity is larger than low velocity, but the amount of shot size has little effect on the magnitude of compressive residual stress. The centroidal residual stress is not greatly affected by the inclined shot peening but mainly related to the unstable conditions of surface residual stress field. Therefore, this tendency may lead to reduce fatigue life of treated material.