• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.294-298
• /
• 2012

In sweet cherry (Prunus avium L.) growing there are several severe problem which have to be overcome to produce highly graded fruits because of fruit rots and fruit crackings, if there is frequent precipitation during immature fruit step and picking season. In order to reduce fungicide sprayings and produce qualified fruits in areas with rainy season like as South Korea, rain-sheltered growing is necessary absolutely. Sweet cherry blooms early to medium April in southern area of South Korea. If we depend on honeybees (Apis mellifera) distributed in natural ecosystem, it is not easy to get normal fruit-set every season because of low temperature around blooming time. And also bee keepers seldom sell honeybee hives as a pollinator during spring, instead they keep honeybee hives to get honey. Recently use of B. terrestris as a pollinator of cherry tomato, oriental pumpkin etc. grown in protected cultivation system increase abundantly. Therefore, in this study we studied B. terrestris as an alternate of honeybee to pollinate sweet cherry grown in rain shelter. In part of foraging activity B. terrestris shows staying on a cherry flower for about six second and visiting frequency of 11 flowers per minute. However A. mellifera stayed about 15 second on a flower and visited 4~5 flowers per minute. There were no significant difference in fruit-setting rate and fruit characteristics after using B. terrestris and A. mellifera as pollinators of sweet cherry. Consequently there is no negative effect when we use B. terrestris as an alternate pollinator of A. mellifera in sweet cherry cultivation under rain shelter.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.6
• /
• pp.873-886
• /
• 2014

This study conducted a survey on jean pants that targeted males in the 20s in order to select preferred brands for skinny jean pants. Preliminary data for the pattern development of skinny jean pants was presented through functionality evaluation, appearance evaluation and pattern analysis. The results were as follows. 1. The result of survey targeting males in the 20s to select the design and brand name of jean pants showed that skinny jean pants were selected as the most favorite type of jean pants to wear; in addition, non-brand products and brand names such as Uniqlo and Levi's were also preferred. 2. The result of functionality evaluation showed that L brand received a high score in all items except for items regarding the knee circumference and mid-thigh circumference, S brand received a high score as well as a low score, and N brand received a low score in general. The result of appearance evaluation showed that L brand for the waist height and waist circumference, N brand for the brand crotch circumference, posterior crotch length and knee circumference, and S brand and N brand for the length of pants were preferred. 3. The result of pattern measurements analysis from the result of functionality evaluation showed that L brand provided a large pattern measurement for the waist height, L brand provided less ease due to small pattern measurements for waist circumference; in addition, N brand for the knee circumference and mid-thigh circumference were preferred. 4. The analysis result shows that a ease of 5cm based on the belly band which is 3.5cm below the belt width is proper for the waist circumference when designing a skinny jean pant pattern and 4cm for the hip circumference and 32.5cm for the ease of crotch circumference are proper, -0.4-0cm for the ease of mid-thigh circumference and knee circumference in consideration of human body measurements; therefore, 80.1-80.5cm for inseam as the length from the crotch height to the leg length, 25.7cm for vertical hip length and 53.0cm for crotch length are proper.

• Land and Housing Review
• /
• v.5 no.2
• /
• pp.69-79
• /
• 2014

Residential Environment Improvement Project (REIP) which has started in 1989 and continued with 3rd government-supporting project in 2013 has lots of policy changes and related studies. However, the related researches have focused on residents resettlement into the project site, this paper is more interested in the residents stability than residents resettlement. So, this paper analyzes the changes of residents stability on the site of REIPs (with 3 groups of dwellers, removers and newcomers). We survey about understanding of those projects, each interior physical housing characters, housing cost, outside settlement characters. On the base of case analysis, we can conclude as follows: firstly, the residents are more young, higher educated, and higher income but not alter to household, barrier, occupation. Secondly, REIPs have some positive influences on physical conditions of housing and outside characters but negative impacts on housing cost. In case of newcomers, there are no changes of housing size and room numbers but higher housing cost, better outside settlement conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.12
• /
• pp.1106-1113
• /
• 2013

For patients who have senile mental disorder such as dementia, quantity of excercise and amount of sunlight are important clue for dose and the treatment. Therefore, monitoring health information of daily life is necessary for patients' safety and healthy life. Portable & wearable sensor device and server configuration monitoring data are needed to provide these services for patients. Watch-type device(smart watch) which patients wear and server system are developed in this paper. Smart watch developed includes GPS, accelerometer and illumination sensor, and can obtain real time health information by measuring the position of patients, quantity of exercise and amount of sunlight. Server system includes the sensor data analysis algorithm and web server that doctor and protector can monitor through sensor data acquired from smart watch. The proposed data analysis algorithm acquires quantity of exercise information and detects step count in patients' motion acquired from acceleration sensor and to verify this, the three cases with fast pace, slow pace, and walking pace show 96% of the experimental result. If developed u-Healthcare System for dementia patients is applied, more high-quality medical service can be provided to patients.

• Korean Journal of Organic Agriculture
• /
• v.21 no.4
• /
• pp.725-736
• /
• 2013

In order to acquire morphological characteristics and genetic characteristics of pathogen that causes anthrax to chestnut, anthrax was separate and identified in Gongju, chungnam chestnut plantation. Antagonistic microorganisms and plant extracts were selected for control of anthrax. Medium maturing variety treatment of 250 dilution fold in field was control at 71.2% and treatment of 500 dilution fold was control at 64.4% and treatment of 1000 dilution fold was control at 40.7%. Storage control value of Jabong in $25^{\circ}C$ after treatment in field is 61.7% at 250 dilution fold, 62.8% at 500 dilution fold, 40.9% at 1000 dilution fold treatment.

• Journal of the Korean Chemical Society
• /
• v.42 no.3
• /
• pp.285-291
• /
• 1998

Methods to determine EU(Ⅲ) ion in aqueous solution by fluorescence spectrometry based upon the ligand sensitized fluorescence of Eu(Ⅲ)-terephthalic acid (TPA) complex ion have been studied. The effects of excitation wavelength, pH, concentration of TPA and emission wavelength on the fluorescence intensity were investigated. The fluorescence intensity of the Eu(Ⅲ) complex ion was further increased with addition of trioctylphosphine oxide (TOPO). In this case Triton X-100 was used to dissolve TOPO in aqueous solution. The calibration curve for Eu(Ⅲ) was linear over the range from $1.0{\times}10^{-6}M\;to\;4.0{\times}10^{-4}M$ and the detection limit was $1.0{\times}10^{-6}M$ under the experimental conditions of 256 nm, 5.6, $3.5{\times}10^{-4}$M$ and 615 nm for excitation wavelength, pH, concentration of TPA and emission wavelength, respectively. When TOPO was added to the Eu(Ⅲ)-TPA system, the concentration range of linear response and the detection limit were $1.0 {\times}10^{-9}M\;to\;1.0{\times}10^{-4}M,\;1.0{\times}10^{-7}M,$ respectively under the experimental conditions of 284 nm, 4.4 and $1.0{\times} 10^{-4}M$ for excitation wavelength, pH and concentration of TOPO, respectively. Effects of interferences from various cations for the determination of Eu(Ⅲ) ion were also investigated.

• Journal of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.472-477
• /
• 1985

The rates for the aquation of $cis-[Co(en)(NH_3)_2Cl_2]Cl in acetone-water mixtures have been measured at various pressures and temperatures by the electric conductivity method. The rate constant measured at 25$^{\circ}$C in pure water solvent is 3.47 ${\times}10^{-4}$/sec. Rate constants are increased with increasing temperature, and decreased with increasing pressure and mole fraction of acetone. Activation volumes and other activation parameters are calculated from these rate constants. The activation volumes are all positive and lie in the limited range +2.82~+$8.2cm^3$/mole. The rate constants in aqueous acetone solution are analyzed with the solvent compositions. Plots of log $k_{obs}$ vs. Grunwald-Winstein Y values show that log $k_{obs}$ varies linearly and the gradients are about 0.25. The applications of a free energy cycle relating the process initial state ${\to}$ transition state in water to that in acetone-water mixture show that the changes in solvation of the transition state have a dominant effect on the rate. From these results the aquation of this complex would be discussed in terms of dissociative mechanism ($I_d$).

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.4
• /
• pp.274-284
• /
• 2014

Crops and varieties are mostly affected by temperature, the amount of precipitation, and duration of sunshine. This study aims to identify the weather factors that directly influence to apple yield among the series of daily measured weather variables during growing seasons. In order to identify them, 1) a priori natural scientific knowledge with respect to the growth stage of apples and 2) pure statistical approaches to minimize bias due to the subject selection of variables are considered. Each result estimated by the Panel regression using fixed/random effect models is evaluated through suitability (i.e., Akaike information criterion and Bayesian information criterion) and predictability (i.e., mean absolute error, root mean square error, mean absolute percentage). The Panel data of apple yield and weather factors are collected from fifteen major producing areas of apples from 2006 to 2013 in Korea for the case study. The result shows that variable selection using factor analysis, which is one of the statistical approaches applied in the analysis, increases predictability and suitability most. It may imply that all the weather factors are important to predict apple yield if statistical problems, such as multicollinearity and lower degree of freedom due to too many explanatory variables used in the regression, can be controlled effectively. This may be because whole growth stages, such as germination, florescence, fruit setting, fatting, ripening, coloring, and harvesting, are affected by weather.

• Science of Emotion and Sensibility
• /
• v.20 no.3
• /
• pp.141-150
• /
• 2017

The purpose of this study was to analyze the effect of the shape and attached position of E-textile-based stretchable sensors on motion-sensing performance and to investigate the requirements for the optimal structure of clothes for sensing limb motions. An experimental garment was prepared with different sensor shapes, and attachment positions. A child subject, wearing the experimental garment, performed arm and leg bending and extension motions at $60^{\circ}$, $90^{\circ}$ and $120^{\circ}$ motion angles, at a rate of 60 deg/sec. The changes in voltage triggered by the stretching and contracting of the fabric-sensor were measured, and an acceleration sensor was utilized to verify that the experimental motions were correctly performed. Dummy arms and legs of a child were manufactured to perform an identical test, in order to compare the dummy results with the actual human body experiment results. The analysis showed that the reproducibility and reliability of the rectangular sensor, showing uniform and stable were higher than those of the boat-shaped sensor, in both the dummy and the human body experiments. The attachment position of the sensor was more reproducible and reliable when placed on 4 cm below the elbow and knee joints in the dummy test, when placed in the joints of the elbow and knee, in children experiment. The appropriate shapes and attached positions of the sensor for sensing the motions were analyzed, and the results proved that motion-sensing of the human body is possible by utilizing flexible fabric-sensors integrated into clothes.

• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.479-490
• /
• 2016

Seabed drilling system has recently been used to drill seafloor mineral resources. This case report highlights the procedure and result of sea-trial of seabed drilling system at off-shore of Japan on March, 2016 as well as briefs an international-technical trend of seabed drilling system. In case of having less than 100 m drill depth, seabed drilling system is favorable for seafloor mineral deposits which are mostly distributed within a narrow district and situated between 1000~3000 m water depth, compared with vessel-mounted drilling system. The system is featured by the remotely-operated drill gear, which has top drives, drill strings and mud system on it. The core samples are generally recovered to ship with seabed driller after a dive. In this sea-trail, recovery rate of core samples averagely shows about 55% and the recovered rocks mostly correspond to fresh and/or weak-altered basalt. In case of drilling hydrothermal ore deposit, the recovery rate would be lower than 55% because of the fragile nature of ores. Alternatively it is used to collect cutting chips through riser or bins in order to increase the recovery rates. Recently a reverse circulation method is taken considered to acquire the better cutting-chips. Three-leg type outrigger system and four-leg type leveling system are the competing landing-instruments of seabed drill system. However the landing efficiency using these gears has to be further monitored due to lack of case reports.