• Electrical & Electronic Materials
• /
• v.25 no.3
• /
• pp.16-23
• /
• 2012

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.222.1-222
• /
• 2002

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.3
• /
• pp.17-25
• /
• 1991

Magnetic leakage flux which is generated from the levitation magnets, linear induction motors, and guide magnets of a MagLev(Magnetic Levitation) system is directly related to inter - system EMI, intra - system EMI, and biological effects. In this paper, the magnetic leakage flux from MagLev vechicles designed by Korea Resarch Institute of Ships & Ocean Engineering was calculated considering the various parameters which influence ma- gnetic field intensity around the MagLev system. Based on the calculated field intensity, the thickness of shielding material and shielding position for MagLev floor and side walls are calculated, taking into account the shielding effectiveness of a shield with minimum weight. For the nonuniform shielding method derived from the above procedure, the weight of a shield con- sisting of floor and side walls shielding can be reduced to more 50% than uniform shielding method.

• Journal of the Korean Society of Radiology
• /
• v.14 no.3
• /
• pp.295-301
• /
• 2020

Radiation exposure exposed during mammography, which is performed for early examination of breast cancer, has also been suggested as a cause of carcinogenesis in the past, and scattered rays generated during examination may cause unnecessary radiation exposure to surrounding organs. In this study, the Monte Carlo simulation was used to evaluate the human organ doses exposed during conventional mammography, and to estimate the dose reduction effect for each organ when using 3D printing materials for radiation protection by scattered rays. As a result of organ dose evaluation, the breast on the opposite side of the examination was about 22.0% of the breast on the test side and about 58.6% on the eye, which was highly influenced by the scattering-ray. When using the 3D printing shield to protect it, the breast on the opposite side of the test showed an effective dose reduction effect at a thickness of 1 mm.

• Journal of radiological science and technology
• /
• v.40 no.3
• /
• pp.461-468
• /
• 2017

This study measured and compared the protective clothing using Pb used for shielding in a diagnostic X-ray energy range, and the shielding rates of X-ray fusion shielding materials using Si and $TiO_2$. For the experiment, a pad type shielding with a thickness of 1 mm was prepared by mixing $Si-TiO_2$, and the X-ray shielding rate was compared with 0.5 mmPb plate of The shielding rate of shielding of 0.5 mmPb plate 95.92%, 85.26 % based on the case of no shielding under each 60 kVp, 100 kVp tube voltage condition. When the shielding of $Si-TiO_2$ pad was applied, the shielding rate equal to or greater than 0.5 mmPb plate was obtained at a thickness of 11 mm or more, and the shielding rate of 100% or more was confirmed at a thickness of 13 mm in 60 kVp condition. When the shielding of $Si-TiO_2$ pad was applied, the shielding rate equal to or greater than 0.5 mmPb plate was obtained at a thickness of 17 mm or more, and a shielding rate of 0.5 mmPb plate was observed at a thickness of 23 mm in 100 kVp condition. Through the results of this study, We could confirm the possibility of manufacturing radiation protective materials that does not contain lead hazard using various metalic compound and liquid Si. This study shows that possibility of liquid Si and other metalic compound can harmonize easily. Beside, It is flexible and strong to physical stress than Pb obtained radiation protective closthes. But additional studies are needed to increase the shielding rate and reduce the weight.

• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.15-26
• /
• 2006

흡수성 차페막을 이용한 조직 유도 재생술시 차폐막의 견고성으로 미루어 보아 재생을 위한 공간의 유지가 어려울 수 있다. 조직 유도 재생술과 함께 골이식술을 시행함으로써 공간 확보와 함께 적절한 혈병의 유지를 도모할 수 있고 이식된 골은 선생골 형성을 위한 핵으로 작용할 수도 있다. 최근에 사람의 치아회분말과 연석고를 혼합한 골이식재가 여러 연구를 통해 좋은 골이식재로 평가되었다. 본 연구에서는 성견 하악 소구치 2급 치근이개부위에 외과적으로 형성하여 흡수성 차폐막과 치아회분말-연석고 혼합 이식재를 이용한 조직유도재생 술을 시행하여 치주 조직 재생의 양상을 조직학적으로 관찰하고자 한다. 생후 12개월에서 16개윌 된 체중 15 Kg 내외의 성견 4마리를 이용하였다. 실험 재료로 생체흡수성 차폐막 (Biogide(R), Swiss) 를 사용하였고, 골이식재로 치아회분말-연석고를 혼합매식 하였다. 양측 상악 소구치 부위에 변연 치조골하방에 4 mm ${\times}$ 4 mm ${\times}$ 4 mm, (깊이 ${\times}$ 근원심 ${\times}$ 협설폭경) 깊이로 골내낭을 형성하였다. 형성된 골내낭의 기저부위 치근 표면에 1/4 round bur로 notch를 형성하여 참고점으로 하였다. 무작위로 선택된 한 쪽의 결손부를 대조군으로 오직 생체 흡수성 차폐막을 사용하였고, 실험군으로 치아회분말-연석고와 생체 흡수성 차폐막을 결손부로부터 2 mm 이상 덮을 수 있도록 다듬어 결손부 위에 위치시킨 후 협측 판막을 덮고 봉합하였다. 4주 후 2마리 ,8주 후 2마리를 희생시키고 통상의 방법으로 고정, 탈회, 포매의 과정을 거쳐 광학 현미경으로 검경하였다. 그 결과, 1. 4주 대조군에서 Bio-gide(R)는 완전한 흡수를 보였고, 치근이개부내에는 큰 공간이 존재하였다. 2. 4주 실험군에서 역시 Bio-gide(R)는 완전한 흡수를 보였고, 골 결손부내에 더 많은 신생골 관찰되었다. 그러나 아직까진 기존골과 신생골간에 명확한 차이가 있어서 쉽게 구분할 수 있었다. 또한 골이식재 주변으로 파골세포가 다수 관찰되며 이로 미루어 보아 활발한 골흡수가 일어남을 알 수 있었다. 3. 8주 대조군에서 결손부내에서는 기존골에 인접하여 신생골 형성이 부분적으로 일어났으나 연조직 침입이 관찰되었다. 4. 8주 실험군은 신생골이 기존골과 매우 유사한 형태로 관찰되었고, 신생골 형성 부위에 신생 혈관 증식이 관찰되었다. 또한 골내낭 기저부위에서는 백악질과, 치주인대가 재생됨이 관찰되었다. 이상의 결과에서 치아회분말-연석고 혼합매식은 골재생을 위한 골전도성이 있는 재료로 사료되며, 이를 이용히여 치주조직재생술시 흡수성 차폐막과 병행하여 사용한다면 더 많은 골재생이 있을 것으로 기대된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.1048-1054
• /
• 1999

It is important to study the shielding effectiveness(SE) of reinforcing material of plastic composite materials against the electromagnetic(EM) waves. In this paper, SE of the shielding material of EM waves was investigated with actual experiments. The materials used in this study were made up of film, fiber and powder of conductive materials - Cu, Al, CF etc. Also, The resin film was used as matrix. The experiment was carried out by using a shielding evaluator(Shielding box) TR17302 with an ADVANTEST spectrum analyzer, model R3361C. It was found from the experimental results that copper, aluminum and carbon fiber were good candidates as a shielding material against the EM waves with increasing the SE as the composite was laminated. The characteristics of the SE against the EM waves depended on a mode of preparation of specimen. The effects of interval of wires on the SE were studied when the orientation and the space of Cu wires were changed. The SE strongly depended on the. orientation and the space of the Cu wire. SE decreased as the space of the Cu wires was increasing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.219-219
• /
• 2001

최근 정전기 방지 및 전자파 차폐재료로 주목받고 있는 전도성 고분자를 절연체 고분자 표면에 코팅하여 정전기 방지 포장용으로 사용되는 투명 대전방지 고분자 쉬트 및 필름을 개발하였다. 현재 사용하고 있는 정전기 방지 포장용 고분자는 폴리스티렌이나 폴리비닐에 카본블랙을 혼합하거나 또는 계면활성제를 표면 에 코팅하여 사용하였다. 그러나 카본블랙을 섞은 경우는 카본입자가 불순물로 작용하여 제품을 오염시키고 검은색 불투명이기 때문에 포장 후 제품을 확인 할 수 없으며 카본 혼합에 따른 기저수지의 물성 약화 가 문제가 되고 있으며 계면활성제를 혼합하거나 코팅하여 사용하는 경우는 시간이 지남에 따라 전도성이 소멸되며 입자가 표면으로 blooming out되어 제품을 오염시키는 단점을 가지고 있다. 본 기술 개발에 의하여 얻어진 투명 전도성 고분자 쉬트 및 필름은 기저수지가 투명할 경우 550nm에서 투명도를 5% 이하로 감소시키며 전도성 물질로 고분자를 사용하기 때문에 영구적인 전도성을 가지며 기저 고분자의 물성을 그 대로 유지 할 수 있는 장점을 가지고 있다. 본 개발품은 전자 부품 및 반도체 포장용 트레이, 캐리어 소재 및 정전기 방지를 필요로 하는 모든 분야에 사용될 수 있으며 전도성 부여 처리기술을 가지고 있기 때문에 포장, 운반 목적 외에 여러 가지 정전기 방지 처리분야에 적용이 가능하다.

• Geotechnical Engineering
• /
• v.13 no.2
• /
• pp.9-16
• /
• 1997

Cut-off methods of controlling leachate migration from waste landfills and contaminated sites are studied. Permeability and chemical compatibility tests are prrforlned on slurry wall materials including soil-bentonite, cement-bentonite, cement / fly ash-bentonite, plastic concrete. Hydraulic conductivity of soil-bentonite mixture is the lowest of these four bacuill materials. The leachate from municipal solid waste has little influence on the permeability of the backfill materials. The bentonite slurry becomes flocculated and aggregated when exposed to the leachate. The results of the permeability test showed that the hydraulic conductivities of the backfill materials are in the order soil-beiltonite, Plastic concrete, cement-bentonite. And the result c: the compatibility test showed increase in permeability due to the effects of leachate. Thus, in designing the slurry wall it is essential to check the behaviour of the bentonite slurry and backfill materials on the compatibility with the contaminants.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.121-128
• /
• 2005

The research on electromagnetic shielding has been advanced for military applications as well as for commercial products. Utilizing the reflective properties and absorptive properties of shielding material, the replied signal measured at the rear surface or at the signal source can be minimized. The shielding effect was obtained from materials having special absorptive properties and structural characteristics such as stacking sequence. Recently researchers studied the electromagnetic properties of nano size particles. In this research {glass fiber}/{epoxy}/{nano particle} composites(GFR-Nano composites) was fabricated using various nano particles, and their properties in electromagnetic shielding were compared. For the visual observation of the nano composite materials, SEM(Scanning Electron Microscope) and TEM(Transmission Electron Microscope) were used. For the measurement of electromagnetic shielding, HP8719ES S-parameter Vector Network Analyser System was used on the frequency range of 8 GHz${\~}$12GHz. Among the nano particles, carbon black and Multi-Walled Carbon Nano-Tube (MWCNT) revealed outstanding electromagnetic shielding. Although silver nano particles (flake and powder) were expected to have effective electromagnetic shielding due to their excellent electric conductivities, test results showed little shielding characteristics.