• 한국시뮬레이션학회논문지
• /
• 제18권3호
• /
• pp.1-11
• /
• 2009

본 논문에서는 자동차 패널 자동창고 시스템의 PLC 시뮬레이션 적용 연구 사항에 관해 소개한다. 자동차 차종의 증가에 따라 차종 별 패널 공급의 복잡도가 향상되었다. 이를 해결하기 위해 AS/RS 시스템을 사용하지만, 내부 시스템 로직의 복잡성으로 인해 사전에 검증하는 것이 매우 어렵다. 특히 AS/RS시스템 제어의 중추적 역할을 하는 PLC는 하위 레벨의 언어로 기술되기 때문에, 사용자가 정확히 이해하고 검증을 수행하기 힘든 것이 현실이다. 본 논문에서는 이 같은 논리적 복잡성과 언어적 한계를 극복하고자 PLC 와 3D 모델을 연동하는 시뮬레이션 환경을 제안하였다. 특히 차체 조립라인의 설비 및 패널 데이터를 실측치를 기반으로 하였고, 실제 PLC 신호를 이용하여 환경을 구축함으로써 시스템 구축 이전에 시운전 환경을 완벽히 구현하였다. 사용자는 제안된 시뮬레이션 환경에서 AS/RS 로직을 시운전 할 수 있게 되었고, 이를 통해 경제적, 시간적 이득을 얻게 되는 장점을 갖는다.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.13-21
• /
• 1992

본 연구에서는 구조-음향모드 연성계수를 이용하여 심각한 소음문제가 발생하 는 경우의 효과적인 소음저감 방안을 제시하고, 제작된 차실모델에 대한 소음저감 시 뮬레이션을 수행한 후 그 결과를 실험치와 비교함으로써 수립된 소음저감 방안의 신뢰 도와 유용성을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1424-1428
• /
• 2005

This paper describes a dedicated three-dimensional CAD system for design of drawing dies for automotive body panels. Since solid die models are useful not only for simulations for design verification, but also for NC tool path generation to machine dies and their Styrofoam patterns, 3-D CAD systems have been introduced in the tooling shop of automotive manufacturers. However, the work to build solid models requires a lot of time and effort if the designer uses only the general modeling capabilities of commercial 3-D CAD systems. To solve this problem, we customized a 3-D CAD system for the drawing die design. The system provides not only 3-D design capabilities, but also standard part libraries to enhance design productivity. By introducing this system, the drawing dies can be designed more rapidly in the 3-D space, and their solid data can be directly transferred to CAM tools for NC tool path generation and simulation tools for virtual manufacturing

• 대한기계학회논문집A
• /
• 제31권4호
• /
• pp.506-516
• /
• 2007

In this paper, a study on low-velocity impact response of four different sandwich panels for the hybrid bodyshell and floor structure application of the Korean low floor bus vehicle was done. Square samples of 100mm sides were subjected low-velocity impact loading using an instrumented testing machine at six energy levels. Impact parameters like maximum force, time to maximum force, deflection at maximum force and absorbed energy were evaluated and compared for four different types of sandwich panels. The impact damage size and depth of the permanent indentation were measured by 3-Dimensional Scanner. Failure modes were studied by sectioning the specimens and observed under optical microscope. The impact test results show that sandwich panel with composite laminate facesheet could not observe damage mode of a permanent visible indentation after impact and has a good impact damage resistance in comparison with sandwich panel with metal aluminum facesheet.

• 한국정밀공학회지
• /
• 제23권11호
• /
• pp.68-77
• /
• 2006

Nowadays, the increasing global competition forces automobile manufacturer to increase quality and to reduce the cost and time for manufacturing planning. To solve these problems, automobile manufacturers try to apply digital manufacturing technologies. In this paper, a concept of method for planning the digital assembly system is proposed. Based on the requirements of assembly tasks obtained through product analysis, the function and sequence modeling for assembly process is executed using the IDEF0 and UML model. For implementation of digital assembly system, the selected components are modeled by using 3D CAD tools. According to the system configuration strategy, lots of the alternative solutions for the assembly system are generated. Finally, the optimal assembly system is chosen by the evaluation of the alternative solutions with TOPSIS(Technique for Order Preference by Similarity to Ideal Solution) method. According to proposed procedure, digital laser welding system is implemented in DELMIA.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 박판성형기술의 진보
• /
• pp.79-86
• /
• 1994

스템핑용 냉연강판의 기계적 성질은 온도에 따라 변하므로 금형재의 열적 특성은 성형의 성공여부에 영향을 미칠 수 있으며 재질선정에 있어 중요한 인자의 하나이다. 금형재질이 성형에 미치는 영향을 조사하기 위하여 차체의 패널용으로 사용되는 강판에 대하여 상온 및 고온에서의 인장시험을 하였으며 구상흑연주철과 회주철을 중심으로 열특성을 조사하였다. 연신율과 인장 강도의 온도 의존성에 대한 검토와 함께 금형재료에 따른 열전달 특성을 분석하여 열특성 측면에서는 회주철이 구상흑연 주철보다 더 적합 하며 열전도율이나 비열 등의 열특성치도 금형재 선정에 중요한 인자중 하나라는 결론을 얻었다.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.141-148
• /
• 2002

Repair were made for front pillar, center pillar and side-step panel for lightweight vehicles with head-on and 40% off-set collision of 15 km/h in a RCAR standard. The salt dilution was sprayed and the compression tests were performed for vehicles with and without anti-corrosional treatment after repair. After 764 hours of salt-dilt sprayed test without using anti-corrosion, the mean penetration depth fur corrosion was shown to be 58% of the thickness. The resulyed decrease in bending stiffness by 10∼20% can cause reduction of the residual life and crash-absorption capability for damaged vehicles. The corrosoin safety tests showed that the anti-corrosional treatment should be made to improve the safety characteristics for a or damaged car.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.119-129
• /
• 2000

In order to show the efficiency and accuracy of an expert drawbead model, finite element simulations of auto-body panel stampings are carried out. For numerical modeling of the drawbead of a panel die, the drawbead restraining force and bead-exit thinning calculated by the expert model are imposed to a node nearest to the drawbead position as a boundary condition, Finite element simulations show that the expert model provides the accurate solution, guarantees the stable convergence, and has the merit in the computation time.

• 한국자동차공학회논문집
• /
• 제23권6호
• /
• pp.642-649
• /
• 2015

Resistance Spot Welding (RSW) is the method for joining two overlapped base materials when high pressure and current is applied from electrodes. Due to the safety problem such high pressure and voltage, automation should be early adopted. In this paper, the spot welding is developed as a computational model of wheel house from GM Korea and the welding condition such as weld sequence is considered. The computational analysis is preceded as a static and elasto-plastic procedure and used thermal expansion coefficient represents a dependency of spot volume between two panels. In case of welding sequence, the efficiency which depends on the distance between current spot point and the other is calculated in several cases.

• 한국정밀공학회지
• /
• 제22권5호
• /
• pp.113-120
• /
• 2005

Because of the turbulent markets and the increasing demand on product quality, the application of new technology to practice is increasingly important. In case of automotive industries, they take interest in laser welding to solve these problems because laser welding has many advantages such as good accessibility, welding quality, fast welding speed and so on. To apply this technology to welding of car body, the data of laser welding are collected through lots of the experiment according to the material, geometry and layer number of welding points. Based on the experiment results and the information of product, i.e. the car side panel, the clustering of stitches for laser welding was carried out and the optimal equipments are selected through the comparison between the requirements of welding and the potential of equipments. Using these results, laser welding cell for the car side panel are configured with the concept of the digital manufacturing, which ensures maximum planning security with visualization and simulation. Finally, the optimal laser welding cell is chosen by the evaluation of alternative cells with assessment criteria.