• Food Science and Preservation
• /
• v.14 no.6
• /
• pp.662-668
• /
• 2007

Studies have shown that onions exhibit a wide variety of health-promoting properties. The health benefits by the onion have been attributed to its ability to scavenge free radicals, to reduce blood lipids, to lower blood pressure, and to inhibit platelet aggregation. This study was performed to investigate whether onion extract supplementation would affect the blood markers of ethanol-induced fatty liver in rats. Initially, male Sprague-Dawley rats were housed singly in a room of controlled temperature and lighting and had free access to a nutritionally adequate AIN-93G and deionized water. The rats were trained for meal feeding to prevent a decline in food intake, as inevitably observed following an ethanol feeding. After the training period, rats were weight-matched and assigned to the following three groups: 1) a control group, fed the AIN-93G diet alone (control); 2) an ethanol group, fed the AIN-93G diet with ethanol at 4 g/day/kg body weight (ethanol); and 3) an onion group, fed the AIN-93G diet with ethanol plus supplemental freeze-dried onion powder at 500 mg/day/rat (ethanol + onion). All three group were meal-fed 7.0 g of their respective diets at 0900 h and 7.5 g at 1600 h for 28 days. At 0, 2, and 4 wk, blood was collected via the orbital sinus and organs were collected following overnight food deprivation. Both control and experimental groups continually gained weight throughout the study. No significant differences in the weights of the liver, kidneys, heart, spleen, and testis were observed. However, the serum level of triglycerides was significantly increased by ethanol but significantly decreased by onion extract. The activities of serum glutamate oxaloacetate transaminase (GOT), glutamate pyruvate transaminase (GPT) at 4 wk were significantly increased by ethanol feeding but were significantly decreased by onion supplementation. However, no differences among groups were observed in the serum levels of alkaline phosphatase, gamma-glutamyl transpeptidase, bilirubin, and protein. These results provide that onion extract favorably affect alcoholic fatty liver by decreasing the serum concentration of triglyceride and the activities of GOT and GPT.

• Journal of Oral Medicine and Pain
• /
• v.37 no.3
• /
• pp.183-188
• /
• 2012

Previous studies of the relationship of TMJ signs and symptoms in elderly people have provided inconsistent findings. The objective of this study was to retrospectively analyze the prevalence of signs and symptoms of temporomandibular disorders(TMD). Additionally, young subjects were examined as a control group. Forty old patients (28 female, 12 male, mean age: $65.2{\pm}2.5$ years) and forty young patients (30 female, 10 male, mean age: $23.3{\pm}2.6$ years) clinically diagnosed with TMD were screened. Patient records were analyzed regarding: pain on chief complain, amount of range of mouth opening, TMJ noises(clicking sounds, crepitus), pain on palpation of the TMJ and masticatory muscles and neck and upper back muscles. Differences between the groups were assessed using t-test and the chi-squared test. (SPSS v.17) P value <0.05 was considered statistically significant. Geriatric subjects more often exhibited crepitus on mouth opening (25%), muscular palpation pain of masseter muscles (82.5%) and temporal muscles(60%). In contrast, young subjects more frequently exhibited joint sounds (62.5%), more amount of range of passive mouth opening (p=0.043). It was found that the younger subjects (82.5%) and the older subjects (87.5%) suffered from subjective sign (orofacial pain on chief complain). There were not statistically significant relationships between orofacial pain (VAS) and the groups. Differences between the groups with respect to joint sounds, muscular palpation pain and mandibular range of motion were significant. Although older subjects more frequently exhibited objective signs (crepitus on opening, pain on muscular palpation) of TMD, younger subjects more frequently objective signs (clicking sound on mouth opening, amount of mandibular range of motion).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.11
• /
• pp.9-18
• /
• 2003

Two configurations of Film Bulk Acoustic Wave Resonators with acoustic quater-wave bragg reflector layers are theoretically analyzed using equivalent circuits and the difference of their characteristics are discussed. We compare the characteristics of λ/2 mode to those of ideal FBAR with top and bottom electrode contacting air and the characteristics of λ/4 mode to those of ideal FBAR with top electrode contacting air and bottom electrode clamped. We assume that the piezoelectric film is ZnO, the electrode is A1 and the substrate is Si, ABCD parameters are extracted and input impedance is calculated by converting the equivalent circuit from Mason equivalent circuits to the simplified equivalent circuits that ABCD parameters are extracted possible, From the variation of resonance frequency due to the change of thickness of reflector layers and the variation of electrical Q due to the change of mechanical Q of reflector layers, it is confirmed that the reflector layer just under the bottom electrode have the greatest effect on the varation of resonance frequency and electrical Q. It is shown that the number of reflector layers required for the saturation of electrical Q decreases with the increase of the impedance ratio of reflector layers and electrical Q of λ/2 mode is larger than that of λ/4 mode, Electromechanical coupling factor is independent of the number of layers, The impedance ratio of reflector layers becomes larger as the electromechanical coupling factor becomes larger, The electromechanical coupling factor of the two mode are smaller than those of ideal FBARs because of the trapping of acoustic energy in the reflector layers, The insertion loss of the ladder filter decreases with the increase of the number of reflector layers but the bandwidth is not affected much by the number of reflector layers, As the impedance ratio of reflector layers becomes larger the insertion loss becomes smaller and the bandwidth becomes wider, In our analysis of the two mode, characteristics of λ/2 mode appear to be slightly more favorable than that of λ/4 mode

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.6
• /
• pp.913-922
• /
• 1995

Background: When we define the pressure of pulmonary vasculature in which a recruitment of blood flow occurs as $P_I$ and the proportion of change in pulmonary artery to that in cardiac output as IR and then we compare PI and IR with pulmonary vascular resistance, we would find some problems in pulmonary vascular resistance. In other words, it is the theory that, IR should be increased mainly in pulmonary embolism in which decreases the cross sectional area of pulmonary vasculature. But there are many contradictory reports resulted from various researches and the fact is known widely that any difference exists between PVR and PI, IR. For this reason, the purpose of this study is to observe how PI and IR change at the time of the outbreak and during treatment of the pulmonary embolism, and to find out the meaning of these new indicators and the difference from the pulmonary vascular resistance used generally when we subdivide the pulmonary vascular resistance into PI and IR. Method: After making AV fistula in experimental dog, we controlled cardiac output at the intervals of 15 minute in case of three kinds(all AV fistula are obstructed, only one of fistula is open and all of fistula is open), and after evoking massive pulmonary embolism with radioactive autologous blood clots, we measured the mean pulmonary artery pressure, and calculated PI and IR. We observed the pattern of change in PI and IR, without giving the control group any specific treatment and with injecting intravenously rtPA in the Group 1 and Group 2 at the dose of 1mg per kg, for 15 minutes fot the former and 3 hours for the latter. Result: 1) Pulmonary vascular resistance showed a change similar to that of pulmonary artery pressure and in all three group, PVR increased significantly, but group 1 and group 2 showed tendency that PVR keeps on decreasing after treatment, and the rate of decrease in group 1 is more rapid than group 2 significantly. 2) Both intersection(PI) and degree(IR) are proved statistically significant, in view of the straight line relationship between cardiac output and pulmonary artery pressure, calculated by minimal regression method. 3) PI changed similarly to pulmonary vascular resistance, while in the IR which is theoretically more similar to PVR, there was no significant difference or change after rtPA infusion. Conclusion: In the pulmonary embolism, Both change in IR which means real resistance of pulmonary vasculature and PI which was developed due to secondary vasoconstriction by pulmonary embolism are reflected same time.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.168-176
• /
• 2011

Purpose: This study aims at investigating the influence of various insertion torques on thermal changes of bone. A proper insertion torque is derived based on the thermal analysis with two different implant designs. Materials and methods: For implant materials, bovine scapula bone of 15 - 20 mm thickness was cut into 35 mm by 40 - 50 mm pieces. Of these, the pieces having 2 - 3 mm thickness cortical bone were used as samples. Then, the half of the sample was immersed in a bath of $36.5^{\circ}C$ and the other half was exposed to ambient temperature of $25^{\circ}C$, so that the inner and surface temperatures reached $36.5^{\circ}C$ and $28^{\circ}C$, respectively. Two types of implants ($4.5{\times}10\;mm$ Br${\aa}$nemark type, $4.8{\times}10\;mm$ Microthread type) were inserted into bovine scapula bone and the temperature was measured by a thermocouple at 0.2 mm from the measuring point. Finite element method (FEM) was used to analyze the thermal changes at contacting surface assuming that the sample is a cube of $4\;cm{\times}4\;cm{\times}2\;cm$ and a layer up to 2 mm from the top is cortical bone and below is a cancellous bone. Boundary conditions were set on the basis of the shape of cavity after implants. SolidWorks was used as a CAD program with the help of Abaqus 6.9-1. Results: In the in-vitro experiment, the Microhead type implant gives a higher maximum temperature than that of the Br${\aa}$nemark type, which is attributed to high frictional heat that is associated with the implant shape. In both types, an Eriksson threshold was observed at torques of 50 Ncm (Br${\aa}$nemark) and 35 Ncm (Microthread type), respectively. Based on these findings, the Microthread type implant is more affected by insertion torques. Conclusion: This study demonstrate that a proper choice of insertion torque is important when using a specific type of implant. In particular, for the Microthread type implant, possible bone damage may be expected as a result of frictional heat, which compensates for initial high success rate of fixation. Therefore, the insertion torque should be adjusted for each implant design. Furthermore, the operation skills should be carefully chosen for each implant type and insertion torque.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.120-127
• /
• 2011

Purpose: The purpose of this study was to examine the effects of chromium chloride addition on coloration, mechanical property and microstructure of 3Y-TZP. Materials and methods: Chromium chloride was weighed as 0.06, 0.12, and 0.25 wt% and each measured amount was dissolved in alcohol. $ZrO_2$ powder was mixed with each of the individual slurry to prepare chromium doped zirconia specimen. The color, physical properties and microstructure were observed after the zirconia specimen were sintered at $1450^{\circ}C$. In order to evaluate the color, spectrophotometer was used to analyze the value of $L^*$, $C^*$, $a^*$ and $b^*$, after placing the specimen on a white plate, and measured according to the International Commission on Illumination (CIE) standard, Illuminant D65 and SCE system. The density was measured in the Archimedes method, while microstructures were evaluated by using the scanning electron microscopy (SEM) and XRD. Fracture toughness was calculated Vickers indentation method and indentation size was measured by using the optical microscope. The data were analyzed with 1-way ANOVA test (${\alpha}$ = 0.05). The Tukey multiple comparison test was used for post hocanalysis. Results: 1. Chromium chloride rendered zirconia a brownish color. While chromium chloride content was increased, the color of zirconia was changed from brownish to brownish-red. 2. Chromium chloride content was increased; density of the specimen was decreased. 3. More chromium chloride in the ratio showed increase size of grains. 4. But the addition of chromium chloride did not affect the crystal phase of zirconia, and all specimens showed tetragonal phase. 5. The chromium chloride in zirconia did not showed statistically significant difference in fracture toughness, but addition of 0.25 wt% showed a statistically significant difference (P<.05). Conclusion: Based on the above results, this study suggests that chromium chlorides can make colored zirconia while adding in a liquid form. The new colored zirconia showed a slight difference in color to that of the natural tooth, nevertheless this material can be used as an all ceramic core material.

• Sijohaknonchong
• /
• v.43
• /
• pp.149-175
• /
• 2015

There have been few researches about Christian imagination reflected in modern sijo. The purpose of this study was to provide basic information helpful to deeply understand Christian literature and clarify the history of Christian sijo literature. For this purpose, the study focused on pieces of sijo written by Seon Jeong-ju and Jang Sun-ha both of whom put out lots of sijo based on Christian imagination. The two poets are common in that they were born in the Japanese colonial period and started their career as a poet at an almost same time. First of all, how a sijo writer, Seon Jeong-ju applied Christian imagination to his pieces of sijo can be summarized as follows. As a poet and paster, Seon Jeong-ju wrote and published 6 volumes of sijo collection. His pieces of sijo were all written based on Christian imagination. Many of the pieces contain Christianity-related stories that were poetically represented through paradoxical imagination. Among pieces of sijo written by Seon Jeong-ju, some reveal enthusiasm for seeking after truth that he kept in mind as a clergyman and others, the poet's strong belief in the Resurrection. Next, Christian imagination that another sijo writer Jang Sun-ha reflected in his works can be briefed as follows. The poet published a sijo collection of his own in 2010. As one of the best representatives of the modern sijo circles, he is a veteran poet who is still creating pieces of sijo. Since he became a Christian in 1996, he has released more than 200 pieces of Christianity-based sijo including those contained in his sijo collection, "Introduction to Love Studies". Most of the Christian poets quoted words from the Bible or borrowed episodes described in the Book. In those poets, he uses imagination that is allusive to the confession of his faith and, in some cases implies his own views of eschatology. In conclusion, both Seon Jeong-ju and Jang Sun-ha wrote and published lots of sijo works on the basis of Christianity, and each of them built up his own world of Christian sijo. In many of the two poet's pieces of sijo, critical doctrines of Christianity and their desperate devotion to that religion are found. Both of them made remarkable poetic achievements, so they deserve being recognized as second to none in the history of Christian sijo literature.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1981.05a
• /
• pp.3.2-3
• /
• 1981

This paper was attemped to analize 55 cases of fiberoptic bronchoscopy during period of 3 years from Feb. 1978 till Feb. 1981 in Chung Ang University hospital. The results were as follow; 1) In age distribution; Most common age group was 5th decade (15 cases, 27.2%) and the other age groups showed relatively even distribution. 2) The ratio of male to female was 3 to 1. 3) The chief complaints were presented in following order; cough (52%), hemoptysis(25%), dyspnea(23.6%), chest pain(18%), chest disomfort(9%). 4) Direct smear of bronchoscopic aspiration material; Not found 33 cases (60%) were most common finding. In the founded bacteria Gram positive cocci 2 cases (3.6%), Gram negative cocci 2 cases (3.6%), Gram positive bacilli 1 cases (1.8%), Gram negativebacilli 2 cases (3.6%), mixed form 15 cases(27.2%) were presented. 5) Bacterial culture of bronchoscopic aspiration material; No growth 28 cases (50.9%) were most common finding. In the bacterial growth, alpha hemolytic streptococci 10 cases (18.2%), Neisseria group 7cases(12.7%), Klebsiella 2 cases (3.6%), Pseudomonas 2 cases (3.6%), mixed culture 6 cases (10.9%) were presented, 6) The diagnosis of bronchoscopic appearance, laboratory exam., and pathologic exam. of biopsed specimen were 21 cases (38.1%) primary carcinoma of bronchus, 8 cases (14.5%) pulmonary tuberculosis, 7 cases (12.7%) bronchitis in orders.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.5
• /
• pp.1-13
• /
• 2007

In this research, we found out that bridging nodes have great effect on the robustness of protein-protein interaction networks. Until now, many researchers have focused on node's degree as node's essentiality. Hub nodes in the scale-free network are very essential in the network robustness. Some researchers have tried to relate node's essentiality with node's betweenness centrality. These approaches with betweenness centrality are reasonable but there is a positive relation between node's degree and betweenness centrality value. So, there are no differences between two approaches. We first define a bridging node as the node with low connectivity and high betweenness value, we then verify that such a bridging node is a primary factor in the network robustness. For a biological network database from Internet, we demonstrate that the removal of bridging nodes defragment an entire network severally and the importance of the bridging nodes in the network robustness.

• Journal of Life Science
• /
• v.13 no.3
• /
• pp.280-290
• /
• 2003

The incorporation of RAPD markers into the previous classical and RFLP genetic linkage maps will facilitate the generation of a detailed genetic map by compensating for the lack of one type of marker in the region of interest. The objective of this paper was to present features we observed when we associated RAPD map from an intraspecific cross of a Glycine max$\times$G. max, 'Essex'$\times$PI 437654 with the public RFLP map developed from an interspecific cross of G. max$\times$G. soja. Among 27 linkage groups of RAPD map, eight linkage groups contained probe/enzyme combination RFLP markers, which allowed us the incorporation of RAPD markers into the public RFLP map. Map position rearrangement was observed. In incorporating L.G.C-3 into the public RFLP linkage group a1 and a2, both pSAC3 and pA136 region, and pA170/EcoRV and pB170/HindIII region were in opposite order, respectively. And, pk400 was localized 1.8 cM from pA96-1 and 8.4 cM from pB172 in the public RFLP map, but was localized 9.9 cM from i locus and 18.9 cM from pA85 in our study. A noticeable expansion of the map distances in the intraspecific cross of Essex and PI 437654 was also observed. Map distance between probes pA890 and pK493 in L.G.C-1 was 48.6 cM, but it was only 13.3 cM in the public RFLP map. The distances from the probe pB32-2 to pA670 and from pA670 to pA668 in L.G. C-2 were 50.9 cM and 31.7 cM, but they were 35.9 cM and 13.5 cM in the public RFLP map. The detection of duplicate loci from the same probe that were mapped on the same or/and different linkage group was another feature we observed.