• International Journal of Highway Engineering
• /
• v.6 no.3 s.21
• /
• pp.37-46
• /
• 2004

This study was performed to establish valid methodology for determining dynamic stability(DS) of deformation-cycle curve which is obtained through wheel tracking(WT) test, the most widely used method for forecast of rutting tendency of asphalt mixture. Existing Korean and Japanese methods for DS are unrealistic and do not really reflect characteristics of rut resistance of asphalt concretes especially when the slope of deformation-cycle curve is stabilized at the end. It was proved that the new DS developed in this study reflected rut resistance characteristics better than existing methods. It is especially effective to distinguish the mixtures with high DR(depth of rut) but stable slope at the end of curve from the mixture with lower DR and continuous slope. The field evaluation must be followed to prove whether the mixture which shows a high DS value this method perform well in the filed.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.12
• /
• pp.25-34
• /
• 2013

This paper presents the results of a reduced-scale physical model investigation into the behavior of retaining walls subject to cycles of wetting and drying due to rainfall infiltration. Reduced-scale model walls equipped with a water spraying system that can simulate the wetting process were first constructed and a series of tests were conducted with due consideration of different rainfall intensities and backfill soil types. The results indicate that cycles of wetting and drying process have adverse effects on the wall behavior, increasing wall deformation as well as earth pressure acting on the wall, and that the first cycle of wetting and drying process has more pronounced effect on the wall performance than the ensuing cycles. It is also shown that the degree to which the wetting and drying cycles affect the wall behavior depends greatly on the backfill soil type, and that the larger the fine contents, the greater is the effect of cycles of wetting and drying on the wall behavior. Practical implications of the findings from this study are discussed in great detail.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.9
• /
• pp.35-44
• /
• 2022

The cyclic triaxial strength test is commonly applied as a laboratory test for evaluating the liquefaction resistance ratio. However, the test procedure was not standardized in South Korea until recently; thus, the test results could significantly differ depending on the performer and apparatus, even when identical soil is used. In this study, the American and Japanese standards for the cyclic triaxial strength test were analyzed and the Korean standard was developed considering domestic circumstances. To verify the effectiveness of the standardization of liquefaction laboratory tests, several cases of cyclic triaxial strength tests were conducted and analyzed (1) following the Korean standard and (2) without following any specific instructions for the test procedure. Under (1), the deviation of the liquefaction resistance ratio dramatically decreased.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.2
• /
• pp.95-103
• /
• 2020

Purpose: The purpose of this study was to compare the axial displacement of the hexagonal and conical abutment in internal conical connection implant after screw tightening and cyclic loading. Materials and Methods: Internal conical connection implants were divided into two groups (n = 10): group HEX, hexagonal abutment; and group CON, conical 2-piece abutments. The axial displacement and removal torque values were measured after 30 Ncm torque tightening and 250N loading test of 100,000 cycles. The Student t test with 5% significance level was used to evaluate the data. Results: HEX group demonstrated significantly higher axial displacement values after 30 Ncm tightening in comparison to the CON group (P < 0.05). No significant difference was found in axial displacement after cyclic loading (P = 0.052). Removal torque loss before and after the cyclic loading both revealed no significant difference between groups (P = 0.057 and P = 0.138). Removal torque value decreased after cyclic loading in both groups (P < 0.05). Conclusion: Overall, both abutment with or without hexagon index presented similar biomechanical performance except HEX group demonstrated significantly more axial displacement after applying tightening torque.

• Journal of the Korea Concrete Institute
• /
• v.13 no.3
• /
• pp.251-260
• /
• 2001

It is required to evaluate the axial strain of reinforced concrete beams in order to predict the ductility of reinforced concrete beams subjected to reversed cyclic loading. A model was proposed to determine the axial strains In reinforced concrete beams by analysing the behavior of reinforced concrete sections and comparing with published test results. The proposed axial strain model inclusively reflected four kinds of paths : Path 1-steel bar in an elastic stage or a unloading region; Path 2-after flexural yielding; Path 3-a slip region; and Path 4-a reversing loading region. The equations to predict the axial strains of each path were proposed. The proposed equations took into account the effects of the loading program. Comparison of axial strains between experimental results and the results from proposed equations showed to be in a good agreement with experimental results.

• 한국해양학회지
• /
• v.24 no.4
• /
• pp.165-171
• /
• 1989

To examine the sample variability of zooplankton, samples were collected at two stations in the nearshore off Anhung (Chungnam, Korea), using a NORPAC net (76 Cm diameter, 0.333 mm mesh size) for two days, April 5 and 6, 1989. The net was towed vertically to eliminate the source of variation due to vertical migration. During the period of 6 hours, triplicate sampling was done every one or two hour at each station. Species composition and abundances at two stations were not so different, but the abundances at each station varied greatly with respect to sampling time. Greater abundance at one sampling time ranged 2.3-8.7 times of smaller abundance at another sampling time. At the level of ${\alpha}=0.05$, however, mean abundances of different sampling time did not differ significantly from each other due to the large variance. It was believed that the large variance was caused by the time dependent effect of patchiness of which parameters were varied with time because of sea water movement. From the variation within the triplicate samples, it was considered that the abundance data obtained from single tow were not significantly different from the data in the range of 50-200% of those from single tow. From these results, the necessity for the replicate and time dependent sampling was indicated. In the nearshore like the sampling site of this study, it seemed to be better to reduce the number of stations for the replicate and time dependent sampling though the proper sampling scheme was to be decided based on the goal of the study.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.1
• /
• pp.27-35
• /
• 2012

Purpose: The present study was conducted to compare any difference caused by pigmentation in the centrations and movement patterns on the cornea between circle and soft contact lens with identical material and parameters during lens wearing. Methods: Soft and circle contact lenses with identical material and parameters were applied to twenty eyes with normal tear volume for 3 hrs a day during a total of 5 days and then their lens centrations, the moving distances and rotations by repeat blinking were compared. Results: The lens centration beyond the fitting criteria was shown in initial wears of both soft contact lens and circle contact lens. However, the centration of soft contact lens was changed to the pupil center for being suitable to the fitting criteria with longer wearing time. On the other hand, the decentration of circle contact lens in the horizontal direction was still presented even with longer wearing time. The moving distances of soft contact lens and circle contact lens decreased with the expand of lens wearing but were not significantly different between total wearing period and daily wearing time. The rotation of circle contact lens by repeat blinking was significantly different from that of soft contact lens even when the wearing period was extended. Conclusions: We revealed that the lens centration and movement of circle contact lens on cornea were different from those of regular soft contact lens resulting in bigger difference with the expand of wearing period in the study.

• Korean Journal of Poultry Science
• /
• v.40 no.3
• /
• pp.235-241
• /
• 2013

This work was carried to evaluate effect of different raising periods on fatty acids and amino acids properties of Korean native commercial ducks. Korean native ducks (n = 90) from National Institute of Animal Science (RDA, Korea) were divided into 6 groups (15 birds/group) and were fed with meat-type duck diets for 8 wk old. When ducks grew at specific wk (6, 7 and 8 weeks), 2 ducks per group were slaughtered at 6, 7 and 8 wk old. Myristic acid (C14:0) and palmitic acid (C16:0) of saturated fatty acid (SFA) were the highest and arachidonic acid of unsaturated fatty acid (USFA) was the lowest at the age of 6 weeks old (P<0.05) at the age of 6 weeks old among treatments. Stearic acid of SFA was the highest at the age of 7 weeks old among treatments. There was no significant difference on other fatty acids among treatments. SFA and USFA have significant difference at the age of 8 weeks (P<0.05). Histidine, leucine, lysine, methionine, phenylalanine and threonine of essential amino acid increased with passing weeks (P<0.05). There was no significant difference on isoleucine and valine (P>0.05). Every non-essential amino acids were the highest at the age of 8 weeks among treatments (P<0.05). In conclusion, fatty acid contents and amino acid contents increased until the age of 8 weeks old, but further research was needed because of deficiency of data to suggest the correct shipping time.

• Physical Therapy Korea
• /
• v.5 no.4
• /
• pp.1-8
• /
• 1998

본 연구의 목적은 장애물 높이에 따른 상지 팔운동 제한이 스텝안정화(stabilization step)에 영향을 주는지 알아보기 위하여 실시하였다. 연구대상자는 대학생 남자 14명, 여자 16명으로 총 30명이였으며, 평균 연령은 21.5세이었다. 스텝 안정화는 FASTEX(functional activity System for testing and exercise, Cybex Division of Lumex, Inc., USA)를 이용하여 측정하였다. 장애물의 조건은 1) 장애물이 없는 조건 2) 15 cm 장애물 3) 25 cm 장애물이었고, 팔 운동의 제한 조건은 1) 팔운동을 제한하지 않은 조건 2) 우세 팔의 운동 제한 3) 양쪽 팔을 모두 제한하는 3개의 조건에서 스텝 안정화 시간을 측정하였다. 장애물 요인과 팔운동 제한 요인간에 안정화 시간(stabilization time)의 차이가 있는지 알아보기 위하여 반복이 있는 2요인 분산분석을 실시하였고, 남녀간에 안정화 시간에 차이가 있는지 알아보기 위하여 t-검정을 실시하였다. 장애물이 없는 조건에서 양팔의 운동을 제한하지 않고 측정한 안정화 시간의 평균은 0.89초이었고, 건측의 상지운동을 제한한 상태에서의 평균은 0.88초이었으며, 양쪽 팔의 운동을 모두 제한했을 때의 평균은 0.84초이었다. 15 cm의 장애물이 있는 조건에서 양팔의 운동을 제한하지 않고 측정한 안정화 시간은 평균 0.98초이었고, 건측의 상지운동을 제한한 상태에서의 펑균은 1.00초이었으며, 양쪽 팔의 운동을 모두 제한했을 때의 평균은 1.14초이었다. 25 cm의 장애물이 있는 조건에서 양팔의 운동을 제한하지 않고 측정한 안정화 시간은 평균 1.09초이었고, 건측의 상지운동을 제한한 상태에서의 평균은 1.28초이었으며, 양쪽 팔의 운동을 모두 제한했을 때의 평균은 1.57초이었다. 남녀간의 스텝 안정화 시간에 차이가 있는지 알아본 결과 각각의 조건에서 통계학적으로 유의한 차이가 없었다. 장애물과 팔운동 제한 조건에 따른 스텝 안정화 시간의 차이가 있는지 알아보기 위하여 반복이 있는 2요인 분산분석을 실시한 결과, 장애물의 높이에 따라 스텝 안정화 시간에는 유의한 차이가 있었고(p<0.05), 15 cm, 25 cm 장애물 조건에서는 팔운동 제한 조건에 따른 스텝 안정화 시간에도 유의한 차이가 있었지만(p<0.05), 장애물이 없는 조건에서는 팔운동 제한에 따른 안정화 시간에는 유의한 차이가 없었다. 이상의 결과는 보행중 장애물을 넘고, 한발로 기립하여 안정성을 유지할 때 팔의 운동이 스텝 안정성에 영향을 미친다는 것을 알았고, 이러한 결과는 한팔 또는 두 팔을 사용할 수 없는 편마비환자나 상지 절단환자의 균형 평가나 치료시 고려되어져야 할 것이다.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.13-17
• /
• 2010

Purpose: Partial volume effect (PVE) is the phenomenon to lower the accuracy of image due to low estimate, which is to occur from PET/CT 3D image acquisition. The more resolution is declined and the lesion is small, the more it causes a big error. So that it can influence the test result. Studied the optimum image reconstruction method by using variation of parameter, which can influence the PVE. Materials and Methods: It acquires the image in each size spheres which is injected $^{18}F$-FDG to hot site and background in the ratio 4:1 for 10 minutes by using NEMA 2001 IEC phantom in GE Discovey STE 16. The iterative reconstruction is used and gives variety to iteration 2-50 times, subset number 1-56. The analysis's fixed region of interest in detail part of image and compute % difference and signal to noise ratio (SNR) using $SUV_{max}$. Results: It's measured that $SUV_{max}$ of 10 mm spheres, which is changed subset number to 2, 5, 8, 20, 56 in fixed iteration to times, SNR is indicated 0.19, 0.30, 0.40, 0.48, 0.45. As well as each sphere's of total SNR is measured 2.73, 3.38, 3.64, 3.63, 3.38. Conclusion: In iteration 6th to 20th, it indicates similar value in % difference and SNR ($3.47{\pm}0.09$). Over 20th, it increases the phenomenon, which is placed low value on $SUV_{max}$ through the influence of noise. In addition, the identical iteration, it indicates that SNR is high value in 8th to 20th in variation of subset number. Therefore, to reduce partial volume effect of small lesion, it can be declined the partial volume effect in iteration 6 times, subset number 8~20 times, considering reconstruction time.