• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.219-230
• /
• 2017

This paper proposes a vehicle to road tracking algorithm based on vision sensor by using EKF(Extended Kalman Filter). The lateral offset, heading angle, and curvature which are obtained from vehicle to road tracking might be used as inputs to steering controller of LKAS(Lane Keeping Assist System) or for the warning decision logic of LDWS(Lane Departure Warning System). To the end, in this paper, the yaw rate, steering angle, and vehicle speed as well as lane raw points together with considering of vehicle lateral dynamics are utilized to improve the exactness and convergence of the vehicle to road tracking. The proposed algorithm has been tested at a proving ground that consists of straight and curve sections and compared with GPS datum using DGPS-RTK equipment to show the feasibility of the proposed algorithm.

• Magazine of the Korea Institute for Structural Maintenance and Inspection
• /
• v.16 no.1
• /
• pp.37-44
• /
• 2012

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.158-164
• /
• 2015

Lane detection is one of the key parts among autonomous vehicle technologies because lane keeping and path planning are based on lane detection. Camera is used for lane detection but there are severe limitations such as narrow field of view and effect of illumination. On the other hands, Lidar sensor has the merits of having large field of view and being little influenced by illumination because it uses intensity information. Existing researches that use methods such as Hough transform, histogram hardly handle multiple lanes in the co-occuring situation of lanes and road marking. In this paper, we propose a method based on RANSAC and regularization which provides a stable and precise detection result in the co-occuring situation of lanes and road marking in highway scenarios. This is performed by precise lane point extraction using circular model RANSAC and regularization aided least square fitting. Through quantitative evaluation, we verify that the proposed algorithm is capable of multi lane detection with high accuracy in real-time on our own acquired road data.

• Annual Conference of KIPS
• /
• 2023.11a
• /
• pp.1157-1158
• /
• 2023

자율주행 시스템에서 차선 인지는 주행의 성능과 안전에 중요한 역할을 한다. 차선 인지 분야에서는 다양한 알고리즘이 사용된다. 본 논문에서는 슬라이딩 윈도우 기법을 사용한 알고리즘을 기반으로, 더 정확하고 효율적인 차선 인지를 위한 개선 방안을 소개한다.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.791-799
• /
• 2010

In this paper, integrated navigation algorithm is designed for land transport sector which is needed high accuracy and monitoring program is developed for lane departure warning. High accuracy position information which is possible lane separation is needed for lane departure warning, so position detection algorithm based GPS/DR which combine GPS with dead reckoning is proposed. For the verification of the designed integrated navigation algorithm, we drived to acquire data and showed post-processing experiment results with monitoring program. Vehicle driving movie and aerial photograph in monitoring program is designed to show lane keeping and lane separation.

• Journal of Auto-vehicle Safety Association
• /
• v.6 no.2
• /
• pp.29-35
• /
• 2014

Lane Keeping Assistance System(LKAS) is a kind of Advanced Driver Assistance Systems(ADAS) which are developed to automate/ adapt/ enhance vehicle systems for safety and better driving. The main system function of LKAS is to support the driver in keeping the vehicle within the current lane. LKAS acquires information on the position of the vehicle within the lane and, when required, sends commands to actuators to influence the lateral movement of the vehicle. Recently, the vehicles equipped with LKAS are commercially available in a few vehicle-advanced countries and the installation of LKAS increases for safety enhancement. The test procedures for LKAS evaluations are being discussed and developed in international committees such as ISO(the International Organization for Standardization). In Korea, the evaluations of LKAS for vehicle safety are planned to be introduced in 2016 KNCAP(Korean New Car Assessment Program). Therefore, the test procedures of LKAS suitable for domestic road and traffic conditions, which accommodate international standards, should be developed. In this paper, some bullet points of the test procedures for LKAS are discussed by extensive researches of previous documents and reports, which are released in public in regard to lateral test procedures including LKAS and Lane Departure Warning System(LDWS). Later, it can be helpful to make a draft considering domestic traffic situations for test procedures of LKAS.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.50-57
• /
• 2009

Lane Keeping Assistant Systems (LKAS) require the cooperative operation between drivers and active steering angle/torque controllers. An LKAS is proposed in this study such that the desired reference path generation (DRPG) system generates the desired path to minimize the trajectory overshoot. Based on the reference path from the DRPG system, an optimal controller is designed to minimize the cost function. A HIL (Hardware In the Loop) simulator is constructed to evaluate the proposed LKAS system. The single camera is mounted on the simulator and acquires the monitor images to detect lane markers. The performance of the proposed system is evaluated by HIL system using the Carsim and the Matlab Simulink.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.103-104
• /
• 2015

본 논문에서는 모형 차량을 이용하여 자율주행 시스템을 구현하고자 한다. 이 시스템의 목적은 차선을 계속 유지함으로써 자율주행을 하는데 있다. 이를 위하여 32비트 마이크로프로세서를 이용한 모형차량을 설계하고 흰 바탕과 검은색 차선으로 이루어진 환경에서 시뮬레이션을 통해 살펴본다. 라인스캔 카메라(TSL1401CL)를 사용하여 차선을 인식하고 이에 따라 자율주행을 하는 시스템을 구현한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.637-639
• /
• 2021

As autonomous driving research is actively progressing, lane detection is an essential technology in ADAS (Advanced Driver Assistance System) to locate a vehicle and maintain a route. Lane detection is detected using an image processing algorithm such as Hough transform and RANSAC (Random Sample Consensus). This paper implements a linear shape detection algorithm using OpenCV on Raspberry Pi 3 B+. Thresholds were set through OpenCV Gaussian blur structure and Canny edge detection, and lane recognition was successful through linear detection algorithm.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.3
• /
• pp.13-19
• /
• 2020

This paper presents steering controller for unintended lane departure avoidance under crosswind using vehicle lateral disturbance estimation. Vehicles exposed to crosswind are more likely to deviate from lane, which can lead to accidents. To prevent this, a lateral disturbance estimator and steering controller for compensating disturbance have been proposed. The disturbance affecting lateral motion of the vehicle is estimated using Kalman filter, which is on the basis of the 2-DOF bicycle model and Electric Power Steering (EPS) module. A sliding mode controller is designed to avoid unintended the lane departure using the estimated disturbance. The controller is based on the 2-DOF bicycle model and the vision-based error dynamic model. A torque controller is used to provide appropriate assist torque to driver. The performance of proposed estimator and controller is evaluated via computer simulation using Matlab/Simulink.