• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.7
• /
• pp.627-635
• /
• 2015

We propose a dual-layer differential equal-gain codebook design methodology for LTE-Advanced(LTE-A), IEEE802.ac, and radar system having multiple transmit and receive antennas, and make computer simulations to evaluate its link-level performaces. M-ary phase shift keying constellation is used as its codeword elements to utilize low-cost power amplifiers at mobile stations. Especially, the proposed codebook can meet radar systems requirement for the high-powered equal-gain transmission property. Due to the temporal correlation of the adjacent channel, the proposed differential codebook can quantize only the differential information of the channel instead of the whole channel subspace, which virtually increase the codebook size to realize more accurate quantization of the channel. The proposed codebook has the same properties of LTE codebook that is, constant modulus, complexity reduction, and nested property. Computer simulations show that the proposed codebook performs better than the conventional 8-ary codebooks with the same amount of feedback information.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.805-814
• /
• 2010

The Crank-Nicolson isotropic-dispersion finite difference time domain(CN ID-FDTD) scheme is proposed based on isotropic-dispersion finite difference(ID-FD) $equation^{[1],[2]}$. The dispersion relation of CN ID-FDTD is derived for lossy media by solving the eigenvalue problem of iteration matrix in spatial spectral domain, in addition, the weighting factors and scaling factors of the CN ID-FDTD scheme are presented for low dispersion error. The CN ID-FDTD scheme makes the dispersion error drastically reduced and shows accurate numerical results compared to the conventional Crank-Nicolson FDTD method.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.3
• /
• pp.51-60
• /
• 2013

It is proposed the new method to calculate the absolute altitude and horizontal position of worker in construction field. For this research, we used a pressure sensor, MEMS INS sensor to acquire 3D position of worker. The easiest way to show the result of this research is to use smart phone which equipped various digital sensors in this hardware. So we made two softwares: Data acquisition software in Android smart phone and Data monitoring software in PC. During this research, we encountered several kind of problems which have to be overcame. This paper shows these processes and the results of 3D positioning technologies we suggested newly.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.298-302
• /
• 2010

This study proposes a differential method to analyze the properties of the topographic surface driven from lidar imagery. Although airborne lidar imagery provides elevation information rapidly, a sequence of extraction processes are needed to acquire semantic information about objects such as terrain, roads, trees, vegetation, and buildings. For the processes, the properties present in a given lidar data need to be analyzed. In order to investigate the geometric characteristics of the surface, this study employs eigenvalues of the Hessian matrix. For experiments, a lidar image containing university campus buildings with the point density of about 1 meter was processed and the results show that the approach is effective to obtain the properties of each land object Surface.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.265-270
• /
• 2006

High-frequency electromagnetic (EM) wave propagation phenomena associated with borehole ground-penetrating radar (GPR) surveys are complex. To improve the understanding of governing physical processes, we present a finite-difference time-domain solution of Maxwell's equations in cylindrical coordinates. This approach allows us to model the full EM wavefield associated with borehole GPR surveys. The algorithm can be easily implemented perfectly matched layers for absorbing boundaries, frequency-dependent media, and finite-length transmitter antenna.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.107-107
• /
• 2012

우리나라의 시설재배는 연중 고품질의 농산물을 요구하는 소비자의 기대와 생산자의 경제적 목적이 부합되어 재배면적이 증가하고 있으며 전체 시설재배면적의 31.3%는 수리시설이 완비된 관개논에 위치한다. 시설재배지에서의 수분관리는 작물의 안정적인 생산과 수자원의 효율적인 사용을 위하여 토양 특성을 고려하여 운영되어야 한다. 따라서 시설재배지 토양 특성을 반영한 작물근군역에서의 물수지와 수분거동 특성에 관한 연구가 선행되어야한다. 불포화토양에서의 수분이동은 토양-작물-대기의 연속계에서 수분의 공급과 증발산, 배수 및 유거에 의한 토양수분 장력의 변화로 이루어지며 토양수분과 토양수분 장력, 수리전도도와의 관계는 토양의 수리적 특성에 따라 상이하다. 실험을 통한 토양수분 거동 분석은 시간적, 비용적 측면에서 비효율적이므로 모형에 의한 분석이 요구된다. 본 연구에서는 불포화토양에서의 수분이동을 모의하기 위하여 Richards 공식을 유한차분법으로 해석하였으며 국내 논 시설재배지 이(異)층토양에 대하여 다양한 관개조건을 적용하여 토양수분 거동 특성을 분석하였다. 관개와 작물의 수분흡수가 지속됨에 따라 근군역을 이탈한 토양수분이 유하되어 밭 토양과 논 토양의 경계에 축적됨을 확인 하였으며 과다관개가 이루어질수록 이러한 현상이 심화되는 것으로 나타났다. 본 연구의 결과는 관개시스템의 설계와 운영에 기초자료로 활용될 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.4
• /
• pp.509-514
• /
• 2000

A numerical study has been performed to design duct parameters in the freezer of a domestic refrigerator. The visualization results of FDM analysis using the standard k-$\varepsilon$ model with inlet boundary conditions modelled in this paper show good agreements with the experimental ones in prediction overall flow characteristics. Dominant vortex flows are found in the left upper and right lower corners, while there exists large turbulent kinetic energy around the fan and right upper side of the fan. It, in turn, has effects on the performance and noise. It is recommended to locate the outlet far away from the fan in order to reduce the noise level.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.3
• /
• pp.101-109
• /
• 1996

Two-dimensional lid-driven closed flows within square cavity were studied numerically for four Reynolds numbers : $10^4$, 3$\times10^4$, 5$\times10^4$ and 7.5$\times10^4$. A convective difference scheme to maintain the same spatial accurary by irregular grid correction is adopted by applying the interior division principle. Grid number is $80\times80$and its minimum size is about 1/400 of the cavity height. At Re=$10^4$, periodic migration of small eddies appearing in corner separation region and its temporal sinusoidal fluctuation are represented. At three higher Reynolds numbers(3$\times10^4$, 5$\times10^4$ and 7.5$\times10^4$), an organizing structure of four consecutive vorticles at two lower corners is revealed from time-mean flow patterns. But, instantaneous flow characteristics show very random unsteady fluctuation mainly due to the interaction between rotating shed vortices and stationary eddies within the corners.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2253-2255
• /
• 2005

운전 중인 회전기기에서 고정자 권선의 절연 상태는 부분방전시험을 통해 검사, 평가할 수 있고 이를 통하여 사고예방을 위한 진단을 할 수 있다. 기존 센서인 SSC(Stator Slot Coupler)는 비접촉식으로 권선의 웨지 아래에 설치하므로 설치하기가 불편하고 Global VPI 방식으로 제작된 소형 회전기에는 사용할 수 없는 단점이 있다. 본 논문에서는 소형 회전기에 사용 가능한 저, 고주파용 부분방전 센서를 제안하였다. 웨지 위에 설치 가능한 SSC 형태의 마이크로스트립 센서 및 2선 평행 전송선로 센서는 고주파에 적합하고 저렴하며 소형 회전 기에 설치 가능하다. 센서의 성능을 검증하기 위해 3차원 해석 프로그램을 사용하여 좋은 전자파 검출 성능을 도출할 수 있었다. 또한 저주파용으로 제안된 U 타입 센서는 유도전류를 검출하는 센서로서 슬롯 외부에 설치되어야 하고 시간차분 수치해석을 이용해서 저주파에서 효과적으로 방전 펄스를 검출함을 확인할 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.1
• /
• pp.55-63
• /
• 2000

This paper investigated the sub-region compression effect of the three dimensional DCT(3D-DCT) using the difference component(DC) of inter-frame in images. The proposed algorithm are the method that obtain compression effect to divide the information into subband after 3D-DCT, the data appear the type of cubic block(8${\times}$8${\times}$8) in eight difference components per unit. In the frequence domain that transform the eight differential component frames into eight DCT frames with components of both spatial and temporal frequencies of inter-frame, the image data are divided into frame component(8${\times}$8 block) of time-axis direction into 4${\times}$4 sub block in order to effectively obtain compression data because image components are concentrate in corner region with low-frequency of cubic block. Here, using the weight of sub block, we progressed compression ratio as consider to adaptive sub-region of low frequency part. In simulation, we estimated compression ratio, reconstructed image resolution(PSNR) with the simpler image and the complex image contained the higher frequency component. In the result, we could obtain the high compression effect of 30.36dB(average value in the complex-image) and 34.75dB(average value in the simple-image) in compression range of 0.04~0.05bpp.