• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2417-2419
• /
• 2003

이동성에 nonholonomic 제약을 받는 차륜 구동 이동 로봇의 불확실한 환경에서의 자율 주행 제어기를 제안하였다. 전체 시스템은 on-line으로 지역경로 계획을 하는 planner 부분과 차륜 구동 이동 로봇의 nonholonomic 제약을 극복하면서 계획된 지역 경로를 충실히 추종하기 위한 제어기 부분의 두 부분으로 구성하였다. Planner는 빠른 응답을 생성하고, 전역적인 정보를 사용하지 않기 위하여 반사적인 제어 방식에 의한 경로 생성 방식을 채택하였고, 제어기 부분은 비선형 posture feedback stabilizer로 설계하였다. 제안된 시스템은 단순한 형태의 제어 방식으로 완전한 자율적인 판단에 의한 장애물 회피와 목표 지점으로의 수렴 능력을 보여 준다. 본 시스템의 단순하면서도 효과적인 자율주행 능력은 반사제어 방식의 장점과 feedback 제어기의 증명된 안정성에서 기인한다. 시뮬레이션과 자체 구현한 차륜 구동 이동 로봇인 "MARI"로 실제 환경에서의 실험을 실시하여 제안된 제어기의 유효성을 검증하였다.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.697-709
• /
• 2010

The patrol robot is a typical extreme robot for the military use. It helps soldiers by detecting and informing a potential risk instead, and warning earlier. Also, these kinds of extreme robots need good ability to conquest rough road. In this paper, we studied new mechanism through which we can get high speed on the flat road with round shape wheels, and simultaneously can get good ability to overcome rough road with blade-shape wheels. The shape of the wheels is being self-adaptively changed automatically according to the condition of the road without using additional actuator.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.6
• /
• pp.578-584
• /
• 2015

In this study a moving platform for a mobile robot that can be traveling with a full automatic standing arm was developed. Conventional mobile robots generally may equip 4 wheels or 3 wheels with a caster wheel or independent driven wheels and have good statistic stability. When a mobile robot travels on a sharply perpendicular and narrow crossroad, it may need a special steering scheme such as going forward and backward repeatedly or it is sometimes physically impossible for the robot to go through the crossroad because of the size limit. The upright running mobile robot changes its posture to the upright posture which has a small planar area and is able to go through the crossroad. The upright control which was manually performed step by step before such as sequences of uprighting (returning), checking, and balancing, is now automated.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.5
• /
• pp.570-576
• /
• 2012

In this research a moving platform for a mobile robot which can run with upright posture is proposed. It is able to stand with standing arms and run uprightly based on an inverted pendulum mechanism. Conventional mobile robots generally may equip 4 wheels or 3 wheels including a caster and have good statistic stability. They need a steering mechanism to choose which way to go since they have a square or rectangular configuration with multiple wheels. When a mobile robot meets a sharply perpendicular and narrow crossroad, it may need a special steering scheme such as going forward and backward repeatedly or it sometimes cannot even pass through the crossroad because of its size. The proposed moving platform for a mobile robot changes to a upright posture which has a small planar area and is able to pass through the crossroad. We propose a moving platform for a mobile robot with a inverted pendulum mechanism and standing arms which can make the mobile robot upright.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.765-773
• /
• 2011

This paper proposes a control method for a differential robot to track and follow a moving object based on ultrasonic sensor. To track a target object, the method uses a transmitter and two receivers to get distances from the object. The method derives translational and rotational error by the distances and then it uses the errors to calculate control values based on PID control method. The control values are used to control the robot to follow moving object. The authors do some experimentations to analyze some characteristics such as influence of PID gain, influence of translational and rotational gain. This method not only can be applied for following moving object problem but also can be done group unit control problems.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2585-2587
• /
• 2005

본 논문은 전차선 급전 케이블 자동가설 로봇의 이동제어를 나타내었다. 작업로봇의 차륜 구동부를 모델링하여 이동제어 시스템이 작업로봇의 이동에 유용한 것을 구명하였다 실험을 하여 실용성을 검토하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.4
• /
• pp.332-340
• /
• 2013

This paper reports a programming toolkit for implementing localization and navigation of a mobile robot both in real world and simulation. Many of the previous function libraries are difficult to use because of their complexity or lack of usability. The proposed toolkit consist of functions for dead reckoning, motion model, measurement model, and operations on directions or heading angles. The dead reckoning and motion model deals with differential drive robot and bicycle type robot driven by front wheel or rear wheel. The functions can be used for navigation in both real environment and simulation. To prove the feasibility of the toolkit, simulation results are shown along with the results in real environment. It is expected the proposed toolkit is used for test of algorithms for mobile robot navigation such as localization, map building, and obstacle avoidance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.6
• /
• pp.731-737
• /
• 1999

This paper describes the path tracking control for a mobile robot which has two casters at the front and rear to keep balance and two driving wheels on the left and right sides of its body. Power wheeled steering method is adapted to control heading of the robot. It is very difficult to find appropriate feedback gains when linear regulator control scheme is adapted to path tracking con-trol of this type of robot. Therefore in this paper we propose the path tracking control algorithm using the fuzzy logic control scheme for this type of root. Simulation to prove the validity of the proposed two algorithms is performed. The results are reported as last part in this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.463-466
• /
• 2017

The purpose of this paper is to develop a module capable of all-directional driving different from conventional wheeled robots, and to solve the problems of the conventional mobile robot with side driving performance degradation, It is possible to overcome the disadvantages such as an increase in the time required for the unnecessary driving. The all - direction spherical wheel drive module for driving a ball - balancing robot is required to develop a power transfer mechanism and a driving algorithm for driving the robot in all directions using three rotor casters. 3DoF (Axis) A driver with built-in forward motion algorithm is embedded in the module and a driving motor module with 3DoF (axis) for driving direction and speed is installed. The movement mechanism depends on the sum of the rotation vectors of the respective driving wheels. It is possible to create various movement directions depending on the rotation and the vector sum of two or three drive wheels. It is possible to move in different directions according to the rotation vector field of each driving wheel. When a more innovative all-round spherical wheel drive module for forward movement is developed, it can be used in the driving part of the mobile robot to improve the performance of the robot more technically, and through the forward-direction robot platform with the drive module Conventional wheeled robots can overcome the disadvantage that the continuous straightening performance is lowered due to resistance to various environments. Therefore, it is necessary to use a full-direction driving function as well as a cleaning robot and a mobile robot applicable in the Americas and Europe It will be an essential technology for guide robots, boarding robots, mobile means, etc., and will contribute to the expansion of the intelligent service robot market and future automobile market.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.4
• /
• pp.469-475
• /
• 2010

This paper presents controller design of a two wheeled mobile inverted pendulum robot for one man transportation vehicle. Since the overall mass is varying with different drivers, suitable controller gains are obtained through experimental studies. Variation of the center of gravity due to different masses also affects stable balancing control. Thus, the desired balancing angle si required to be modified with respect to different masses. To measure masses for different drivers, a weight scale is used and those data are used for balancing control through communication. The gain scheduling method of using data obtained from experimental studies allows the robot to have stable balancing performances.