• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.99-111
• /
• 2002

전산기술의 발달에 힘입어 근래에 모의실험을 이용한 연속교통류의 미시적 분석이 활발히 수행되고 있고 다양한 모의실험 전산모형이 소개되고 있다. 미시적 연속교통류 전산모의실험은 차량추종모형과 차로변경모형을 적용하여 다양한 운전자들의 차량운행행태를 모사하여 분석하는 실험이다. 전산모형은 난수를 토대로 차량의 자유속도와 초기 발생 차로를 배정하기 때문에 낮은 자유속도를 할당받은 차량이 높은 속도의 차로(예:1차로)로 발생되는 경우가 발생한다. 많은 모의실험모형이 사용하고 있는 차로변경의 가정이 "운전자는 자신이 원하는 속도(자유속도)를 유지한다"는 것이며 그러한 가정만의 적용으로 인해 현실적이지 않은 차로 이용률이 결과되고, 따라서 전산모형을 통한 교통류 흐름분석에 문제를 제공하고 있다. 본 논문에서는 미국 도로국에서 20여년 동안 개발되고 수정되어왔으며 현재 실용적으로 가장 많이 사용되고 있는 Freeway Simulation(FRESIM) 전산모형이 내재한 차로변경모형을 토대로 고속도로 기본구간에서의 선택적 차로변경모형을 제시한다. 제시된 모형에서는 (1)저속의 선행차량이 고속의 후행차량에게 차로를 양보하는 가정이 새롭게 추가되고 (2)FRESIM모형에서 사용하는 상수값을 국내 현장조사를 통하여 도출된 분포식을 통한 값으로 대체하였다. 수집된 자료분석결과 연속 교통류에서의 15% 차두시간은 1.34초이며 차로변경시간은 평균 2.22초인 F분포를 따르고, 자유속도는 정규분포를 따르는 것으로 결과되었다. 모의실험결과 무작위난수를 토대로 배정된 차로로 생성된 차량들이 새롭게 제시된 차로변경모형의 적용으로 현장 차로이용률을 95% 신뢰수준에서 모사하는 것으로 분석되었다.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.145-157
• /
• 2004

Microscopic freeway simulation models project the uncertain values of performance measures for subject traffic conditions by explaining drivers' driving behavior with lane changing and car-following models. However, the existing lane changing models are limited to gap acceptance oriented passive behavior of drivers and not able to capture more-or-less aggressive driving behavior(e.g. cut-in lane changing) ordinarily obseved in field. This paper suggests the definition of cut-inlane changing and presents its characteristics based on the findings from two different freeway on- and off-ramp sections. In addition, this paper proposes a new lane changing model capable of handling both passive and active drivers' driving behavior for better performance of simulations. The proposed lane changing model was tested with Hanyang Simulatin (HYTSIM), a microscopic freeway simulation program developed for this study. The HYTSIM simulation results reflecting the performance of the proposed lane changing model were compared against the field data. The test results showed that the distribution of gaps collected when vehicles change lanes were statistically identical to the field data at 95% confidence level.

• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.332-347
• /
• 2017

Analysis of the interaction between the automated vehicles and manual vehicles is very important in analyzing the performance of automated cooperative driving environments. In particular, the automated vehicle platooning can affect the driving behavior of adjacent manual vehicles. The purpose of this study is to analyze the lane change behavior of the manual vehicles in automated vehicle platonning environment and to conduct the experiment and questionnaire surveys in three stages. In the first stage, a video questionnaire survey was conducted, and responsive behaviors of manual vehicles were investigated. In second stage, the driving simulator experiments were conducted to investigate the lane change behaviors of in automated vehicle platonning environments. To analyze the lane change behavior of the manual vehicles, lane change durations and acceleration noise, which are indicators of traffic flow stability, were used. The driving behavior of manual vehicles were compared across different market penetration rates (MPR) of automated vehicles and human factors. Lastly, NASA-TLX (NASA Task Load Index) was used to evaluate the workload of the manual vehicle drivers. As a result of the analysis, it was identified that manual vehicle drivers had psychological burdens while driving in automated vehicle platonning environments. Lane change durations were longer when the MPR of the automated vehicles increased, and acceleration noise were increased in the case of 30-40 years old or female drivers. The results from this study can be used as a fundamental for more realistic traffic simulations reflecting the interaction between the automated vehicles and manual vehicles. It is also expected to effectively support the establishment of valuable transportation management strategy in automated vehicle environments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.276-290
• /
• 2023

Several efforts in Korea are currently underway with the goal of commercializing autonomous vehicles. Hence, various studies are emerging on autonomous vehicles that drive safely and quickly according to operating guidelines. The current study examines the path search of an autonomous vehicle from a microscopic viewpoint and tries to prove the efficiency required by learning the lane change of an autonomous vehicle through Deep Q-Learning. A SUMO was used to achieve this purpose. The scenario was set to start with a random lane at the starting point and make a right turn through a lane change to the third lane at the destination. As a result of the study, the analysis was divided into simulation-based lane change and simulation-based lane change applied with Deep Q-Learning. The average traffic speed was improved by about 40% in the case of simulation with Deep Q-Learning applied, compared to the case without application, and the average waiting time was reduced by about 2 seconds and the average queue length by about 2.3 vehicles.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.2
• /
• pp.273-279
• /
• 2019

Development of mountain area is increasing due to the demand for improvement of traffic convenience and development of underdeveloped area. Therefore, there frequently are sections where tunnels and interchanges are located close to each other. These sections do not only affect tunnel planning, types and length of interchanges, but also affect more on route selection. In Korea, several design criteria present each reference value but these values are very similar. In the situation, the minimum value among them is usually applied when planning roads and it could cause traffic safety problems in different site conditions. In this study, the problems of design speed, illuminance adaptation distance, and lane change intervals are analyzed by simulating the cases that the problem could occur when calculating the separation distance between tunnel and interchange. The results obtained from this study can be summarized as following: the driving speed should be applied in case that the site has a big gap between design speed and driving speed because the uniform application of the design speed is not safe; the illuminance adaptation distance should include the influence distance in the section affected by the direct light; in addition, the lane change distance should include the time to perceive the situation of the next lane after the lane change in the section required for successive lane change.

• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.93-104
• /
• 2002

The purpose of this study was to develop a improved high-order continuum model among macroscopic traffic flow models. This study was mainly performed for uninterrupted flow. In the first step, the proposed model described traffic flow at dropped lane. (no exits) It was possible to describe the traffic flow during short-term considering lane change. The proposed model was based on Payne's model. Our model was newly applied to uninterrupted traffic flow in consideration of geometry condition and driver behavior. It is possible to establish efficient control strategies, simulation and assess the effects of geometric improvements using this model. This model was simulated with field data for the actual adaption. The results of the model tests, traffic volume and density is suitably represented. we think that the results in the article can be led to predicting the situation in the near future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.3
• /
• pp.38-51
• /
• 2020

A bottleneck and congestion occur when a freeway is closed due to maintenance and construction activities on the freeway. Although various traffic managements have been developed to improve the traffic efficiency at freeway work zones, such as merge control, there is a limit to those controls with human drivers. On the other hand, the wireless communication of connected and automated vehicles (CAVs) enables the operation of advanced traffic management. This study developed a traffic control strategy that integrates Dynamic Merge Control (DMC) and Lane Change Control (LCC) in a CAV environment. DMC operates as an either early or late merge based on the occupancy rate of upstream of the work zone. The LCC algorithm determines the number of vehicles that need to change their lane to balance the traffic volume on open lanes. The simulation results showed that integrated control improves the cumulative vehicle count, average speed upstream, and average network travel time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.305-311
• /
• 2012

With the rapid deployment of hipass$^{(R)}$, the congestion is inevitable due to the operation of the hipass lane system. Recently, SMART Highway project have developed a multi-lane mainline tolling system, called SMART Tolling system. To analyze the effectiveness of the system in terms of capacity, this study tries to estimate the capacity and its improvement of multi-lane tolling system based on current hipass$^{(R)}$ data. The methodology uses the saturation time headway. This follows three steps; 1) estimate the saturation time headway, using hipass$^{(R)}$ data, and capacity. 2) estimate two factors (the first one is dividing the one side lane width and lateral clearance factor ($f_w$) into two side one, the second one is dividing the capacity of hipass lane operating a circuit breaker into the capacity of hipass lane not operating, the last one is increasing factor of lane width). 3) calculate the capacity of multi-lane mainline tolling system. The results of method produced 2172~2187 veh/hour as smart tolling capacities, respectively. Those are higher about 370 veh/hour than the values from existing literature reviews. Additionally, saturation time headways were identified as lower by 0.5 seconds/veh than existing headways based on hi-pass$^{(R)}$ based one, which naturally implies the improvement in capacity. Some limitations and future research agenda have also been discussed.

• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.7-15
• /
• 2011

Emerged in early 1990s, so called 'Quick service' industry that provides faster delivery of small parcels than regular mail service accelerated use of motorcycles. As the economic grows, use of large bicycles (more than 250CC displacement) for leisure purpose has also rapidly increased. Traffic crash data clearly shows the increasing trend in motorcycle crashes. The ratio of motorcycle involved crashes out of total has increased from 5.7% in 2005 to 8.3% in 2008, and similar trend can be found in fatalities ratio as well. In this study, we assess the level of risk when motorcycles operate on motorways by analyzing traffic rule violation ratio, lane change behaviour, driving speed behaviors of motorcycles in Uninterrupted Traffic Flow Facilities and using PC-CRASH simulation we also calculate car shock impulses occurred when an accident happens. Analysis result shows that the motorcycle is different from the car in terms of lane change timing and average speed, and also shows motorcycle drivers tends to conduct more improper driving behavior particularly when traffic is congested. The results from this study could be usefully applied when the law enforcement agent decides whether bicycles shall be allowed to use motorways. The result could be also utilized as fundamental information for further study of bicycles' driving behavior.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.65-72
• /
• 2011

When an expressway intersects another expressway, a unique connector needs to be designed between the two consecutive exit ramps. In such a case, it is important to design a connector such that there is enough distance for drivers to find their way safely. A current design manual in Korea prescribes the minimum length of the connector as 240 m. In this research, we have suggested a method for calculating the minimum length of a connector in order to check the feasibility of the currently prescribed length. For this purpose, we have attempted to determine the total perception-reaction time and lane-changing time required by a driver. For determining the driver's perception-reaction time, we have used the driver's decision time in addition to the conventional 2.5 s of perception-reaction time for stopping sight distances. We have considered both the design speed and the average travel speed for the calculation of the length. To evaluate the accuracy of the new method, we have chosen four sites on expressways for which relatively high accident rates were recorded. As a result, we could verify that the current limit (240 m) was sufficient for drivers to be able to change lanes in the given specific geometry. However, the prescribed limit should be revised in case the drivers' decision time is considered to be their perception-reaction time. All new approaches for calculating the ideal length of a connector have been carried out by taking into account the design speed as well as the average travel speed. Owing to the characteristics of the specific geometry for two consecutive exit ramps and the large difference between the design speed and the average travel speed in the objective areas, it is more realistic to use the proposed method by keeping the decision time equal to a driver's perception-reaction time, in order to determine the ideal distance that should be maintained between two consecutive exit ramps.