• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.153-154
• /
• 2010

최근 GPS를 이용한 위치기반서비스(LBS)는 일상생활의 큰 변화를 가져왔다. 이러한 LBS 중에서도 가장 흔히 접할 수 있는 것이 차량 항법용 장치인 네비게이션이다. 초창기의 네비게이션이 단순히 목적지까지 가기 위한 가장 짧은 도로를 안내해 주는 것이 목적이었다면 최근에는 TPEG과 같은 실시간 교통 상황 안내, 이용자 선호도를 고려한 경로탐색, 에코 드라이빙과 같은 좀 더 높은 수준의 서비스가 개발되고 있다. 하지만 현재의 차량항법 시스템은 교통상황 안내 이외에는 현실적인 도로상황 반영이 어렵고 시간대별 통행량의 차이가 큰 국내 교통상황에 대한 고려가 미흡하다. 또한 교통정보 수집장치가 설치되지 않은 도로는 교통상황 안내마저도 제공되지 않는다. 본 논문에서는 이러한 문제점을 개선하기 위하여 임베디드 DBMS를 이용하여 과거 통행이력정보를 저장하고 활용할 수 있도록 도로망 DB스키마를 정의하였다. 그리고 이를 탐색경로의 소요 시간 산출에 활용하여 실제적인 도로상황을 고려한 경로안내 방법을 제안한다. 실제주행이력은 네트워크 데이터의 링크단위로 관리되며 저장된 주행이력은 경로탐색에 필요한 정보인 진입시각, 진출시각, 요일, 통행횟수로 관리된다. 이렇게 단말기에 저장된 주행이력은 중앙DB를 통해 사용자간 공유가 가능하고 향후에는 실시간 동기화를 통해 더욱 신뢰도 높은 경로탐색에 활용될 수 있다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.9
• /
• pp.103-112
• /
• 1999

In this paper, a speaker-independent isolated world recognition system for a car navigation system is implemented using a general digital signal processor. This paper presents a method combining SNR normalization with RAS as a noise processing method. The semi-continuous hidden markov model is adopted and TMS320C31 is used in implementing the real-time system. Recognition word set is composed of 69 command words for a car navigation system. Experimental results showed that the recognition performance has a maximum of 93.62% in case of a combination of SNR normalization and spectral subtraction, and the performance improvement rate of the system is 3.69%, Presented noise processing method showed good speech recognition performance in 5dB SNR in car environment.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.3
• /
• pp.300-309
• /
• 2003

The Japanese developed the first Car navigation system in 1981 with the advent of Honda, which was known as the car inertial navigation system. Now days, It is possible to search the shortest route to and from places and arrival time using the internet via cell phone to the driver based on GIS and GPS. However, even with a good navigation system, it losses the shortest route when there is an average speed of the vehicle being between S-15 kilometers. Therefore, in order to improve the vehicle waiting time and average vehicle speed, we are suggesting an optimal green time algorithm using fuzzy adaptive control, where there are different traffic intersection lengths, and lanes. In this paper, to be able to assist the driver and forecast the optimal traffic information with regards to the road conditions; dangerous roads, construction work and estimation of arrival time at their destination using internet.

• Journal of KIISE:Databases
• /
• v.28 no.3
• /
• pp.430-448
• /
• 2001

In navigation system, a primary task is to compute the minimum cost route from the current location to the destination. One of major problems for navigation systems is that a significant amount of computation time is required when the digital road map is large. Since navigation systems are real time systems, it is critical that the path be computed while satisfying a time constraint. In this paper, we have developed a HiTi(Hierarchical MulTi) graph model for hierarchically structuring large digital road maps to speedup the minimum cost path computation. We propose a new shortest path algorithm named SPAH, which utilizes HiTi graph model of a digital road map for its computation. We prove that the shortest path computed by SPAH is the optimal. Our performance analysis of SPAH also showed that it significantly reduces the computation time over exiting methods. We present an in-depth experimental analysis of HiTi graph method by comparing it with other similar works.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.3
• /
• pp.341-347
• /
• 2015

This study aims to design a chief VDR(Voyage Data Recorder) system which is appropriate to small and medium sized vessels and also implement the data about marine communication devices, sensors, etc. to be stored or printed at the navigator when those data are connected to VDR through data communication between marine navigation and VDR which are based on serial communication or internet in order to prove efficiency of the marine navigator. Also, the design of VDR is intended to be small and light in order to expand to apply it to small and medium vessels, which enables to analyze causes of marine accidents precisely through its characteristic functions which are the same as those at "vehicle mounted black-box" (location of the car, image and voice storage) by which the same roles are played on land.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.180-187
• /
• 2010

In this paper, a GNSS-based AGV system was designed, and steering tested on a golf cart using electric wires in order to confirm the control efficiency of the low speed vehicle which used only position information of GNSS. After analyzed the existing AGVs system, we developed controller and steering algorithm using GNSS based position information. To analyze the performance of the developed controller and steering algorithm, straight-type and circle-type trajectory test are executed. The results show that steering performance of GNSS-based AGV system is ${\pm}\;0.2m$ for a reference trajectory.

• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.297-304
• /
• 2015

Recently, the demand for a PRT(Personal Rapid Transit) system based on autonomous navigation is increasing. Accordingly, the applicability investigations of the PRT system on rail tracks or roadways have been widely studied. In the case of unmanned vehicle operations without physical guideways on roadways, to monitor the position of the vehicle in real time is very important for stable, robust and reliable guidance of an autonomous vehicle. The Global Positioning System (GPS) has been commercially used for vehicle positioning. However, it cannot be applied in environments as tunnels or interiors of buildings. The PRT navigation system based on magnetic markers reference sensing that can overcome these environmental restrictions and the vehicle dynamics model for its H/W configuration are presented in this study. In addition, the design of a control S/W dedicated for unmanned operation of a PRT vehicle and its prototype implementation for experimental validation on a pilot network were successfully achieved.

• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.417-425
• /
• 2012

It is well known that GPS cannot provide positioning results if sufficient number of visible satellites are not available. To overcome this weak point, attentions have been recently moved to hybrid positioning methods that augments GPS with other sensors. As an extension of hybrid positiong methods, this paper proposes a new method that combines GPS and vision sensor to improve availability and accuracy of land vehicle positioning. The proposed method does not require any external map information and can provide position solutions if more than 2 navigation satellites are visible. To evaluate the performance of the proposed method, an experiment result with real measurements is provided and a result shows that accumulated error of n-axis is almost 2.5meters and that of e-axis is almost 3meters in test section.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.235-247
• /
• 2009

Map is information media for human life. Recently, innovative map making technology has been developed and most updated various data are provided to map users. In consequence, use of maps is rapidly increasing in various applications. One of the examples is car navigation map because navigation maps provide reliable and necessary information with convenient way. Therefore, maps are to be changed to user-oriented from map making-oriented design. The main goal of spatial data infrastructure is to allow various users to access the real world information easily for decision making. However, most of the digital maps are focused on map making aspect such as providing up-to-date data, acquisition of accurate data with state-of-the-art technology, and addition of layers (For example, ortho-images and DEMs). If map data processing tools are to be provided with the digital maps, users could utilize maps for decision making without professional software or knowledge. Therefore, objective of this paper is to propose scheme of the digital map data processing service with application examples.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.71-78
• /
• 2010

The road safety depend on many road factors like vertical alignment, horizontal alignment and road cross section angle. These data are hardly to get with drawings, and the real data are differ from drawings because of road pavement overlay, etc. To get these data, so many time and cost are needed, moreover it is dangerous work in heavy traffic road. In this study we obtained the road safety data with RoSSAV(Road Safety Survey & Analysis Vehicle) of Korea Institute of Construction Technology in accordance with traffic flow, and make analysis of road safety with the vertical alignment, horizontal alignment and road cross section angle data. We derived the safety improvement method in Young-dong accident prone spot and described detail method in this paper.