• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.605-613
• /
• 2010

In this study, Impact factors are represented and barrier height of compact car road of safety barrier is suggested through the investigation of applying problems of existed standard of general car road. For this, traffic accidents analysis is performed and based on the analysis, impact vehicle weight, impact Angle, crash velocity, and barrier height are investigated. For the decision of impact angle, analysis is carried out by comparison of RISER and 2-lines expressway accidents data. Through this, higher-impact angle is suggested. Vehicle weight data of sub-compact car, small vehicle, medium and large vehicle, SUV, small truck is surveyed and analyzed. Based on the accident accumulation rate, regression analysis of vehicle weight impact and impact velocity is performed. Also, based on the cumulative rate of vehicle weight on expressways near Seoul, barrier height of compact car road is calculated. It is noted that the results of this study will be contributed to the decision of barrier type.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.166-166
• /
• 2004

운전자 보조시스템에는 적응순항제어 (adaptive cruise control), 차선변경 (lane change), 충돌경고 (collision warning), 충돌회피 (collision avoidance), 및 자동주차 (automatic parking) 등이 있다. 이런 운전자 보조시스템은 어떤 목적을 가지고 있다. 운전자의 부담을 줄이고 안전을 위하여 차량의 주행방향에 있는 장애물이나 차량을 감지하여 차량간의 안전거리론 유지하고 자동차가 일정 속도를 유지하도록 한다. 운전자 보조시스템의 효율은 센서들로부터 얻어진 정보의 해석에 달려있다.(중략)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.885-892
• /
• 2015

In this study, we simulate the railway crash accident that occurred at the Sangwangsimni station on the Seoul Metro Line #2, and we propose a solution to minimize the damage. We use LS-DYNA, which is the commercial software employed for collision analysis to perform 1-D and 3-D simulations for the recurrence of accidents. By performing 1-D simulations, we analyze the load, displacement, absorbed energy of the couplers, and acceleration of vehicles, and we evaluate the safety in accidental collisions. By performing 3-D simulations, we analyze the deformation of the car and over-ridding. We propose methods to improve the safety in collisions involving railway vehicles, and we perform collision accident simulations to determine improvements when applying a high-performance energy absorber to the front car.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8966-8976
• /
• 2015

Unshielded posts on roadside are a critical hazard to the safety of impact vehicle to the posts. A crashworthy post is developed. In the first phase, it dissipates the impact energy by the linear momentum conservation principle while the plastic impact between the post and vehicle takes place, then, the second phase dissipation follows by the deformation of the energy absorbing modules embedded in the guide trough of the foundation. Simulations of impacts to a rigidly connected post and crashworthy post were made using LS-DYNA program, which demonstrated the danger of unshielded rigidly connected post and the effectiveness of the proposed crashworthy post to the 0.9ton-80km/h impact.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.5
• /
• pp.445-454
• /
• 2020

Non-breakaway crashworthy sliding posts move rigidly with a vehicle in the early stage of vehicle impact. During this stage, a vehicle imparts its linear momentum to the post, experiencing first-stage speed loss followed by second-stage loss from the crush of the energy-absorbing pipe (EAP) installed under the guide rail. An EAP is the key element of a crashworthy sliding post and should be confined to the post foundation. This paper covers the development of an EAP for a sliding post of 507 kg, which is a sliding post type frequently used in Korea for cantilever signs. Detailed explanations of the designs for an EAP structure using LS-DYNA impact simulation are given, and the crashworthiness of the systems are confirmed through crash tests. The EAP presented in this paper can accommodate impacts from 0.9 ton-60 km/h to 1.3 ton-80 km/h, and is applicable to foundations up to 2.7 m in length.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.115-122
• /
• 2012

Automobile collision analysis is composed of various shapes, and the speed variation working to the vehicle during collision are utilized as a very important factor in evaluating the degree of vehicle collision or passenger safety. So, the method of analyzing result values on the speed variation utilizing collision analysis program become necessary. This study utilized PC-Crash program in order to compare actual values and analyzed values of braking distance with the friction coefficient of road surface according to vehicle velocity. As a result, the smaller friction coefficient found to be larger error, and the maximum error range of collision velocity in case of each different vehicles (MATIZ, SONATA, or BUS) at the intersection showed 1.2%, 1.8%, 3.1% according to the difference of vehicle weight. Moreover, an accidental fall at IN-CHEON large bridge in order to reappear was verified with practicing simulation which has a slight error.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.5
• /
• pp.9-17
• /
• 2016

Vehicle collision to bridges has been known as one of the causes of bridge collapse, and the emergency plans and disaster management has been recently emphasized to secure public safety. This study conducted risk assessment of vehicular collision to bridges for highway bridges in Korea. Risk assessment consists of three steps; preliminary risk analysis(PRA), simplified risk analysis(SRA) and detailed risk analysis(DRA). The PRA firstly screens out the possibility of occurrence of the event. The SRA identifies influencial factors to risk of the event and evaluates risk scores to determine risk levels and necessity of DRA that investigates the risk of the bridge in detail. This study focuses on the methodology of the risk assessment, especially the SRA, and the stratification methods which evaluate risk levels of vehicular collision. The analysis results were compared to the reported vehicular collision accidents. The proposed method can be utilized in similar disaster management area.

• Journal of Auto-vehicle Safety Association
• /
• v.16 no.2
• /
• pp.34-43
• /
• 2024

As the autonomous vehicle is to come to the commercial market, passive safety of the vehicles becomes ever more important, since more responsibility of the car crash accidents will be imposed on the car makers. To cope with such a requirements, comprehensive studies are under progress in car OEM's as well as relevant institutes. In this study FE models of two identical family sedans are utilized to investigate the effect of crash parameters like crash impact locations, and impact angle. Relationship between structural behavior of the car and the dummy injury measures is studied.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2D
• /
• pp.163-170
• /
• 2008

According to the rules, a crash cushion is supposed to set up products that is satisfied with the standard of a performance test after performing the car crash test by road safety facilities and management guide. For development of crash cushion, performance should be estimated through the car crash test eventually. However, there is no reasonable design method which considers passenger's safety and only depend on crash test without an alternative plan. Therefore it incurs a loss materially and takes a lot. Therefore, we are asked to create a systematic design of the crash cushion. This study shows that a scientific basis of applying single degree of freedom when it designs the crash cushion after analyzing vehicle crash test data of crash cushion and also represents design of crash cushion through single degree of freedom response spectrum using calculated by crash test data on crash cushion.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.295-300
• /
• 2012

Various forward collision warning algorithms have studied in order to protect a car accident. For this, in general, algorithms using an external device such as a camera and sensor generate a forward collision warning. However, if using the external device, it can occur errors due to device characteristics when there is rain or fog. Also, the prevention of a chain-reaction collision is insufficient because the system generates a warning in case of only vehicle having a forward collision danger. If it combines the vehicle safety communications, the method becomes a solution to protect a chain-reaction collision. So, In this paper, we proposes a improved forward collision warning algorithm using the wireless communication technique, driver's information, breaking distance, and velocity. And we compare and analyze our algorithm and previous algorithms.