• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.879-885
• /
• 2018

The highway weaving section is a point where there is a conflict caused by entry and exit vehicles. In order to minimize the impact on the main line, an accumulation line should be installed. The design speed of the collecting part is 50 km/h, but the actual driver does not have proper deceleration according to the design speed. In this study, considering the driving behaviors, the design specification, and the driver 's viewing angle, the appropriate separation distance for safe entry and exit of collecting, connecting, and collecting roads was examined. As a result of the analysis, it is found that a distance of 60m is required from the point where the merging starts. The results of this study are expected to contribute to the improvement of driver safety due to the conflict between entry and exit vehicles when applied to the weaving section where collecting roads are installed.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.79-87
• /
• 2003

Underground flexible pipes for electric cables are subject to external loads and surrounding soil pressure. Particularly, strain of flexible pipes is of great concern in terms of safety and maintenance of electric cables. In this paper, stress and strain of flexible pipes with two types of installation gap, ie, l0cm and naught, were compared to investigate the structural integrity of pipes from actual field test. The effect of degree of compaction and burial depth were also investigated to simulate the variety of construction situation. The results of the field test show that the strain criteria were satisfied under the burial depths of 80cm, 100cm and 120cm regardless of installation gap.

• Korean Journal of Environment and Ecology
• /
• v.23 no.1
• /
• pp.41-49
• /
• 2009

This research conducted a survey on the feeding crane's size, formation and distribution distance subsequent to road pattern and feeding flock's size during the wintering season eight times at the Cheolwon basin in Korea from December 2005 until February 2006. The survey results are as follows: First, the feeding flocks of the Red-crowned and White-naped Crane were found to mainly consist of two to four individuals. Mono-specific feeding flocks were more identified than hetero-specific feeding flocks in both Red-crowned and White-naped Cranes. There existed a significant difference in the ratio by size between the feeding Red-crowned and White-naped Cranes. The crane's average distribution distance from the paved road was much farther than from the unpaved road, paved farm road and unpaved farm road. In case of the white-naped crane, there was a difference in its distance length from between the road and farm road and there existed a significant difference only in the paved road in the distance length by road pattern between these two bird species[Red-crowned and White-naped Crane]. Such a result indicates that crane species don't prefer the road with frequent vehicular traffic to the road with low vehicular traffic. 5 or more individuals of feeding flocks of the Red-crowned Crane were located at a farther distance length from the paved road comparing to less than 5 individuals of the whole feeding flocks and less than 5 individual feeding flocks. 5 or more individuals of feeding flocks of the White-naped Crane were located at a farther distance length from the paved road, paved farm road and unpaved farm road than less than 5 individuals of feeding flocks of the White-naped Crane; however, there existed no difference in distance length subsequent to their group size. Conclusively, it was found out that the flocks with a larger size were more greatly affected by interrupting factors. Considering such results, there seems to be a more relation to the fact that larger size feeding flocks of crane species have a higher efficiency in the lookout for their surroundings.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.43-55
• /
• 2017

The purpose of this study is to investigate the effect of traffic loads on retaining wall stability. There is insufficient research on lateral earth pressure on retaining wall due to traffic load. In addition, limited detailed designs of retaining wall for transportation including number of lanes of road, magnitudes of axle loads, and vehicle formations are available. Because the lateral earth pressure on the retaining wall due to traffic loads is a function of the lateral distance from retaining wall, the wall height, and the locations of lanes, the analysis of lateral load on retaining wall from traffic loads is performed with direct or indirect reflection of these factors. As a result of the analysis, lateral earth loads induced from traffics can be considered negligible if the lateral distance of traffic load from wall exceeds the height of retaining wall. Therefore, it is practically reasonable to consider traffic loads within a lateral distance between wall and traffic load of the height of retaining wall.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.85-94
• /
• 2004

Loop detection systems have been used in real-time signal control system to collect traffic information for estimating queue lengths. The queue length algorithm uses speed as a key variable estimated from occupancy time and average vehicle length. The measurement of average vehicle length is affected from the lengths of feeder cable, but their effects have not yet been evaluated. In this study, the variability of average vehicle length due to the lengths of feeder cable is assessed through a field study, and a practical guidelines is proposed. By applying this result, the operational performance of real-time signal control system could be improved.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.573-582
• /
• 2014

Since there is no clear installation criteria on minimum spacing between signalized intersection and minor road, many problems have occurred in terms of traffic operation and safety. Even though many studies about entrance/exit intersection have been done in operational aspects, there is no specific and detailed research between the signalized intersection and minor road by now. Thus, this research suggests the optimal spacing between signalized intersection and minor road considering traffic operation and safety. Also, survey on vehicle behavior was conducted in this research. In conclusion, by suggesting the required minimum spacing between signalized intersection and minor road, it can be contribute in establishing and operating the installation criteria between signalized intersection and minor road.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.212-219
• /
• 2021

Chemical accidents caused by transport vehicles account for 20% of all chemical accidents every year, but there are difficulties in the accident-response process due to repeated situations where the impact assessment information is unknown. In this study, we developed a calculation table and formula for predicting the range of damage for chlorine and hydrogen fluoride, which have a high domestic usage, high risk of accidents, and high accident frequency in the last 7 years. The calculation table is based on the leakage rate, wind speed, and temperature, and the calculation formula was derived using R software for special situations where it is difficult to apply the calculation table. The calculation table and formula could be used on site by related organizations to obtain important information for decision making, which could help in minimizing damage from chemical accidents, setting separation distances, and deciding to evacuate residents.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.101-113
• /
• 2008

VMS are installed in many Korean highways in oder to give drivers informations such as travel time to destination, congestion and Incident situation. However, some guidelines for install VMS are restricted in only geometric factors although human factors considering driver behavior are very important to affect the VMS installation. Therefore, this paper are focusing on developing and verifying the discriminant model for VMS installation considering human factors. As a result, following outputs are obtained ; (1) developing the discriminant model using human factors of driving simulation experiments in oder to predict driver reading VMS messages safely detour highway. (2) proving that driving experiences in highway, personal driving history, vehicle speed orderly affects VMS installation (3) verifying predictability of developed model by comparing the real values with predicted values. (4) suggesting that VMS should be installed off 3.2Km from the I.C. of rural highway.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.461-467
• /
• 2006

To detect individual vehicular speed, double loop detection technique has been widely used. This paper investigates four methodologies to measure individual speed using only a single loop sensor in a traveling lane. Two methods developed earlier include estimating the speed by means of (Case 1) the slop of inductance wave form generated by the sensor and (Case 2) the average vehicle lengths. Two other methods are newly developed through this study, which are estimations by measuring (Case 3) the mean of wheelbases using the sensor installed traversal to the traveling lane and (Case 4) the mean of wheel tracks by the sensor installed diagonally to the traveling lane. These four methodologies were field-tested and their accuracy of speed output was compared statistically. This study used Equality Coefficient and Mean Absolute Percentage Error for the assessment. It was found that the method (Case 1) was best accurate, followed by method (Case 4), (Case 2), and (Case 3).

• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.452-461
• /
• 2014

Conventional parking survey has been usually performed by a person, which has a lot of problems such as decreased mobility, data input error, longer time and expensiveness. Therefore, this study attempted to develop an automatic parking survey method using lately commercialized equipments that were highly efficient imagery interpretation equipments, GPS, and infrared lighting fixtures. In addition, this study developed a parking analysis software that enables to modify and save data, and analyze survey data by the automatic parking survey method. When parking survey is conducted using automatic parking survey method, surveying accuracy is influenced by the running speed of a surveying vehicle, the photographing angle of an imagery interpretation equipment, the gap between parking vehicles and the distance of a surveying vehicle to parking vehicles. Therefore, this study drew optimum conditions by testing on each items for accuracy improvement, and developed a parking analysis software for systematic storage and management of parking survey data, supporting the parking analysis and output the parking analysis result.