• Journal of the Korean Institute of Intelligent Systems
• /
• v.6 no.2
• /
• pp.57-71
• /
• 1996

차량 모델 비선형성의 주된 요인중 하나는 타이어의 비선형성이라고 할 수 있다. 타이어 모델도 간편화하기 위해 선형화된 타이어 모델을 적용할 경우에 저속 주행 또는 고속 주행이라고도 조향각이 적을 때는 문제가 없지만, 급격한 가감속과 과도한 조향각을 주었을 때는 타이어 미끄럼 각(Tire Slip Angle)이 급격히 변화되므로 선형화 된 타이어 모텔을 적용하지 못하게 된다. 그러므로 타이어와 지면 사이의 물리적 현상을 자세히 표현할 수 있는 비선형 타이어 모델을 적용하지 못하게 된다. 그러므로 타이어와 지면 사이의 물리적 현상을 자세히 표현할 수 있는 비선형 타이어 모델이 요구되어진다. 실험적 모델은 실제 차량의 실험 데이터를 바탕으로 커브 피팅(Curve Fitting)하여 타이어의 동특성을 표현하도록 모델링 하므로서 모델의 정확도를 높일 수 있는 반면 요구하는 계수들이 많아지게 되어 계산량이 증가되는 단점이 있다. 기존의 타이어 모델 연구 결과에 대해 분석하고, 관측 자료들을 바탕으로 FMFNN(Fuzzy Membership Function based Neural Network)을 이용한 함수 근사화로서 타이어 횡축력과 종축력의 모델링 방법을 제안하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.27-31
• /
• 2011

차량의 대형화 및 고속화, 그리고 기존 교량의 노후화를 고려하였을 때, 교량의 건전성 평가는 매우 중요해지고 있다. 거동을 예측하는데 사용되는 유한요소 모델의 신뢰도는 이상적인 가정과 모델링 오차, 교량의 노후화 등에 의해 실제 거동을 반영하지 못하는 경우가 많다. 유한요소 모델의 신뢰도를 높이기 위해, 실제 교량의 거동을 계측하여, 이를 기반으로 물리적 의미를 가지는 변수들과 지점의 조건을 수정하는 모델의 개선이 주로 행해진다. 이러한 모델 개선은 최적화 기법을 통해 수행된다. 본 연구에서는 목적함수간 가중치에 의한 모델 개선 결과의 영향과 다중 목적 함수 최적화 기법을 통해, 가중치의 영향을 줄이고, 다양한 개선 모델들을 구하는데 적용하였다. 팔곡 3교의 실제 계측 데이터를 이용하여 단일 다중 목적 함수 기반의 모델 개선을 수행하였다. 단일 목적 함수의 경우, 정의되는 목적함수는 주로 고유진동수와 모드 형상에 관한 차이의 가중치 합으로 표현되어 지며, 이러한 가중치에 따라, 모델 개선의 결과에 영향을 가함을 확인하였다. 다중 목적 함수 기반의 모델 개선을 통해, 구해진 모델 개선 결과를 단일 목적 함수 기반 모델 개선의 결과들과 비교하였으며, 모델 개선에 대한 다중 목적 함수 최적화 적용을 분석하였다.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.227-232
• /
• 2004

Vehicle dynamics control systems are complex and non-linear, so they have difficulties in developing a controller for the anti-lock braking systems and the auto-traction systems. Currently the fuzzy-logic technique to estimate the absolute vehicle speed supplies good results in normal conditions. But the estimation error in severe braking is discontented In this paper, we estimate the absolute vehicle speed of UCT(Unmanned Container Transporter) by using the wheel speed data from standard anti-lock braking system wheel speed sensors. Radial symmetric basis function of the neural network model is proposed to implement and estimate the absolute vehicle speed, and principal component analysis on input data is used 10 algorithms are verified experimentally to estimate the absolute vehicle speed and one of them is perfectly shown to estimate the vehicle speed within 4％ error during a braking maneuver.

• Journal of the Korea Computer Graphics Society
• /
• v.17 no.4
• /
• pp.23-30
• /
• 2011

We propose an intelligent ribbon road network for automatic vehicle simulation, and a real-time algorithm for large-scale, realistic traffic simulation based on artificial energy functions. Our method reconstructs a road network automatically from both GIS (Geographic Information System) real-world data and synthetic models. Such automatic road network helps us to easily simulate almost every possible scenario such as intersections, ramps, etc. In order to simulate agents' movement, we design car-environment interaction energy and car-car interaction energy functions. Car agents move along the road network according to the proposed energy functions while avoiding collisions with other car agents.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.51-58
• /
• 2002

Vehicle dynamics control systems are. complex and non-linear, so they have difficulties in developing a controller for the anti-lock braking systems and the auto-traction systems. Currently the fuzzy-logic technique to estimate the absolute vehicle speed is good results in normal conditions. But the estimation error in severe braking is discontented. In this paper, we estimate the absolute vehicle speed by using the wheel speed data from standard 50-tooth anti-lock braking system wheel speed sensors. Radial symmetric basis function of the neural network model is proposed to implement and estimate the absolute vehicle speed, and principal component analysis on input data is used. Ten algorithms are verified experimentally to estimate the absolute vehicle speed and one of those is perfectly shown to estimate the vehicle speed with a 4% error during a braking maneuver.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.2
• /
• pp.9-14
• /
• 2011

This Paper proposed the prediction method of fuel consumption from vehicle informations through OBD-II Interface. We assumed RPM, TPS had a relationship with fuel consumption. We got the output as fuel-consumption from a vehicle RPM, TPS as input by using polynomial equation. We had modelling as quadric function with OBD-II data and fuel consumption data supported by automotive company in real. In order to verify the effectiveness of proposed method, 5 km real road-test was performed. The results showed that the proposed method can estimate precisely the fuel consumption from vehicle multi-data.

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.6-13
• /
• 2024

This paper proposes an approach to detect abnormal data in automotive controller area network (CAN) using an unsupervised learning model, i.e. autoencoder and Gaussian kernel density estimation function. The proposed autoencoder model is trained with only message ID of CAN data frames. Afterwards, by employing the Gaussian kernel density estimation function, it effectively detects abnormal data based on the trained model characterized by the optimally determined number of frames and a loss threshold. It was verified and evaluated using four types of attack data, i.e. DoS attacks, gear spoofing attacks, RPM spoofing attacks, and fuzzy attacks. Compared with conventional unsupervised learning-based models, it has achieved over 99% detection performance across all evaluation metrics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.3
• /
• pp.266-272
• /
• 2004

In this paper, an observer-based adaptive controller is proposed to control the longitudinal motion of vehicles. The standard gradient method will be used to estimate the vehicle parameters such as mass, time constant, etc. The nonlinear model between the driving force and the vehicle acceleration will be chosen to design the state observer for the vehicle velocity and acceleration. It will be shown that the proposed observer is exponentially stable, and that the adaptive controller proposed in this paper is stable by the Lyapunov function candidate. It will be proved that the errors of the relative distance, velocity and acceleration converge to zero asymptotically fast, and that the overall system is also asymptotically stable. The simulation results are presented to investigate the effectiveness of the proposed method.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.7
• /
• pp.423-430
• /
• 2005

In this paper. a microphone array beamforming algorithm that reduces the signal distortion caused by reverberation and near-field effect in car environment is proposed. When reverberation or near-field effect is present, an optimum beamformer should be constructed with a steering vector consisting of transfer functions between source and microphones, but it is generally difficult to estimate transfer functions on-line without knowledge of the source signal. Instead, a sub-optimal beamforming algorithm that reduces signal distortion is proposed. It is constructed with steering vectors consisting of relative transfer functions between reference sensor and other sensors. In order to evaluate the performance of the proposed algorithm. we had recorded noisy speech database in a car, and performed speech recognition experiments with HMM Toolkit (HTK) released by Cambridge University. The recognition rate of the proposed algorithm was 15 percents higher than that of the conventional far-field beamformers in best case.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.61-69
• /
• 2020

This study examined the braking characteristics of a heavy haul freight train with P4a distribution valves applied to domestic high-speed freight trains. A freight train was composed of 50 cars, which is twice the normal operation. A braking test was performed to confirm the characteristics of the braking of a heavy haul. The brake cylinder pressures were measured for emergency and service braking on the 1st, 10th, 20th, 30th, and 50th cars. Because the brake signal is transmitted to the pressure through the braking tube connected to the end of the train, the rear vehicle is braking later than the vehicle ahead. Therefore, it is necessary to predict the brake pressures in all cars in a train to supplement the results of the limited tests and calculate the braking distance. The pressure in each car was determined using empirical models of linear interpolation, stepwise, and exponential models, which provided reliable information. The predictive results of the empirical models were compared with the measured results, and the exponential model was predicted relatively accurately. These results are expected to contribute to the safe operation of heavy haul freight trains and can be used to predict the braking distance and calculate the level of impact between vehicles during braking.