• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.291-298
• /
• 2020

ZITO/Ag/ZITO multilayer transparent electrodes at room temperature on glass substrates were prepared using RF/DC magnetron sputtering. Transparent conductive films with a sheet resistance of 9.4 Ω/㎡ and a transmittance of 83.2% at 550 nm were obtained for the multilayer structure comprising ZITO/Ag/ZITO (100/8/42 nm). The sheet resistance and transmittance of ZITO/Ag/ZITO multilayer films meant that they would be highly applicable for use in polymer-dispersed liquid crystal (PDLC)-based smart windows due to the ability to effectively block infrared rays (heat rays) and thereby act as an energy-saving smart glass. Effects of the thickness of the PDLC layer and the intensity of ultraviolet light (UV) on electro-optical properties, photopolymerization kinetics, and morphologies of difunctional urethane acrylate-based PDLC systems were investigated using new transparent conducting electrodes. A PDLC cell photo-cured using UV at an intensity of 2.0 mW/c㎡ with a 15 ㎛-thick PDLC layer showed outstanding off-state opacity, good on-state transmittance, and favorable driving voltage. Also, the PDLC-based smart window optimized in this study formed liquid crystal droplets with a favorable microstructure, having an average size range of 2~5 ㎛ for scattering light efficiently, which could contribute to its superior final performance.

• Journal of the Korean Geographical Society
• /
• v.42 no.1 s.118
• /
• pp.121-132
• /
• 2007

This paper examines the spatial and temporal variability in the water depth caused by artificial structures in Geum Estuary of South Korea. Water depth data set extracted from marine maps of 1979, 1990, 1996 and 2004 were used in a GIS to derive volumetric estimates of gains and losses of sedimentary material. Artificial structures caused above 2m in water depth to be shallow between 1979 and 2002 in the estuary system, particularly through disturbance of a natural transport in suspended sediment concentrations. The mutt significant change in suspended sediment transport were observed in area affected by embankment for fresh water, inducing the water depth shallower than before in almost 80% of the area. This was probably because of an continuous abundant mud supply from coastal river oven after blocking the fresh water. The spatial analysis made it possible to identify area wide patterns of water depth change subject to many different type of artificial structures, which tanner be acquired by traditional field sampling. It is anticipated thai this research could be used as a valuable reference to confirm the outputs from past field researches for sedimental process in more visual and quantitative manner.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.7
• /
• pp.486-493
• /
• 2003

Schottky type A $l_{0.33}$G $a_{0.67}$N ultraviolet photodetectors were fabricated on the MOCVD grown AlGaN/ $n^{＋}$-GaN and AlGaN/AlGaN interlayer/ $n^{＋}$-GaN structures. The grown layers have the carrier concentrations of -$10^{18}$, and the mobilities were 236 and 269 $\textrm{cm}^2$/V.s, respectively. After mesa etching by ICP etching system, the Si3N4 layer was deposited for passivation between the contacts and Ti/AL/Ni/Au and Pt were deposited for ohmic and Schottky contact, respectively. The fabricated Pt/A $l_{0.33}$G $a_{0.67}$N Schottky diode revealed a leakage current of 1 nA for samples with interlayer and 0.1$\mu\textrm{A}$ for samples without interlayer at a reverse bias of -5 V. In optical measurement, the Pt/A $l_{0.33}$G $a_{0.67}$N diode with interlayer showed a cut-off wavelength of 300 nm, a prominent responsivity of 0.15 A/W at 280 nm and a UV-visible extinction ratio of 1.5x$10^4./TEX>.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1452-1458
• /
• 2010

This study was performed to investigate the effect of ginsenoside Rg1 treatment on wound healing using SD rats by generating four full-thickness skin wounds on the dorsum. In the Rg1-treated groups (5,000 and 10,000 ppm), area of wounds and macroscopic inflammatory signs were significantly decreased compared to control group throughout the experimental period in a concentration dependent manner. Histological appearance after 20 days of treatment with Rg1 revealed the formation of epithelial layer, hair follicles and progressive angiogenesis and an increase in collagen and granulation as compared to control group. Rg1 treatment resulted in the increased expression of the vascular endothelial growth factor (VEGF) mRNA and reduced expression of transforming growth factor beta (TGF-$\beta$) mRNA in wounded skin compared to control group. The expression levels of VEGF and TGF-$\beta$ mRNA in the Rg1-treated groups were similar to those of Fucidin(R) ointment-treated group. These results suggested that Rg1 should be helpful for the promotion of wound healing.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.41-46
• /
• 2014

The property improvement of polycarbonate coated with a multilayer film composed of an inorganic $SiO_2$ film and a photocatalytic $TiO_2$ film was studied. The $SiO_2$ film as a binder had an excellent light transmission characteristic. After the treatment with atmospheric pressure plasma, the surface of $SiO_2$ film showed the hydrophilicity, which increased the film coating uniformity with a $TiO_2$-containing aqueous solution. When $TiO_2$ film was over 200 nm thick, the absorption effect of UV rays in the range of 180~400 nm suppressed the yellowing phenomena of polycarbonate substrate. The inorganic film improved the heat resistance of polycarbonate substrates. $TiO_2$ film in the outmost under the exposure of UV rays promotes the catalytic oxidation characteristics and yields the capability to the decomposition of organic contaminants, and also increases the self-cleaning properties due to the increase of hydrophilicity. Structural stability of the polycarbonate substrate coated with inorganic $TiO_2$ and $SiO_2$ film was shown. The role of $SiO_2$ film between $TiO_2$ and polycarbonate substrate suppressed the peeling of $TiO_2$ film by inhibiting the photocatalytic oxidation effect of $TiO_2$ film on the polycarbonate substrate.

• Fire Science and Engineering
• /
• v.20 no.4 s.64
• /
• pp.1-12
• /
• 2006

In this study, CFD computer simulations by FDS are carried out in order to confirm the performance of the combined operation of both sprinkler system and smoke curtain of 0.54 m depth installed for cooling and blocking the smoke which propagates beneath the sloped ceiling of a stairway corridor of which dimensions are 17.92 m long, 4.00 m wide, and 6.12 m high. It is shown that the response time of sprinklers decreases with fire size and it increases more about 1.1 second in case without smoke curtain than in case with smoke curtain, that the time of smoke transport from the fire source to the stairway outlet decreases considerably with fire size, and that the delay effect of smoke transport is not related to the sprinkler system, whether it is operated or not. This study shows that the combined operation of both sprinkler system and smoke curtain is very effective in smoke cooling, but it is a little for effect on smoke blockage. Although the hazard of skin burn due to radiative heat flux from hot smoke layer is decreased by spray cooling effect, the hazard of smoke suffocation and the weakening of visibility is increased by smoke downdrag and the turbulence of smoke-air mixing due to water spray. These conditions may result in preventing occupants from going out of the stairway during evacuation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.4
• /
• pp.367-375
• /
• 2021

This study evaluated the fluoride release of alkasite restorative material (ARM) and giomer penetrating the dentin adhesive layer. Twenty specimens were prepared for each restorative material, and dentin adhesive with uniform thickness was applied to half of them. The prepared specimens were placed in a polyethylene tube containing 2.0 mL of deionized water and deposited in a 37.0℃ water bath for the study duration. The amount of fluoride release was measured on the 1^st, 3^rd, 7^th, 14^th, 21^st, and 28^th days after deposition. The dentin adhesive applied to the ARM and giomer could not completely block the fluoride release; however, it significantly reduced its amount. The cumulative amount of fluoride release of the ARM after 28 days was higher than that of the giomer regardless of the application of dentin adhesive.

• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.50-57
• /
• 2022

Ti-In-Zn-O (TIZO)/Ag/TIZO multilayer transparent electrodes were prepared on glass substrates at room temperature using RF/DC magnetron sputtering. Obtained multilayer structure comprising TIZO/Ag/TIZO (10 nm/10 nm/40 nm) with the total thickness of 60 nm showed a transmittance of 86.5% at 650 nm and a sheet resistance of 8.1 Ω/□. The multilayer films were expected to be applicable for use in energy-saving smart window based on polymer-dispersed liquid crystal (PDLC) because of their transmittance properties to effectively block infrared rays (heat rays). We investigated the effects of the content ratio of prepolymer, the thickness of the PDLC coating layer, and the ultraviolet (UV) light intensity on electro-optical properties, and the surface morphology of polyester acrylate-based PDLC systems using new TIZO/Ag/TIZO transparent conducting electrodes. A PDLC cell with a thickness of 15 ㎛ PDLC layer photocured at an UV intensity of 1.5 mW/cm² exhibited good driving voltage, favorable on-state transmittance, and excellent off-haze. The LC droplets formed on the surface of the polymer matrix of the PDLC composite had a size range of 1 to 3 ㎛ capable of efficiently scattering incident light. Also, the PDLC-based smart window manufactured using TIZO/Ag/TIZO multi-layered transparent electrodes in this study exhibited a light brown, which will have an advantage in terms of aesthetics.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2021.04a
• /
• pp.28-29
• /
• 2021

애기똥풀(Chelidonium majus L. subsp. asiaticum H.Hara)의 지상부는 백굴채라고 불리며 항암, 항균 등의 효능을 가지고 있어 예로부터 약용으로 이용되었다. 그러나 천연 약용소재로 개발가치가 높음에도 불구하고 실생묘의 대량 확보를 위한 종자번식 관련 연구가 전무한 실정이다. 본 연구에서는 애기똥풀의 발아 및 휴면 특성을 분석함으로써 추후 종자번식을 위한 기초자료를 제공하기 위해 수행되었다. 실험재료로 사용된 애기똥풀 종자는 2019년 6월 경상북도 봉화군에서 채종하였으며 정선 후 건조상태로 실온(25℃)에 보관하였다. 종자의 1000립중은 0.57±0.01g이며, 배종비는 0.21±0.12로 조사되어 형태적으로 미성숙한 배를 가지고 있다. 종자의 활력은 테트라졸륨 검정을 통해 79%로 확인되었다. 종자의 기본 함수율은 7.64±0.25%였으며, 침지 2일 차에 최대함수율(32.6±0.34%)에 도달하였다. 초기 발아검정은 25/15℃ (light/dark, 16/8h)챔버에서 명조건과 암조건으로 구분하여 30일간 진행하였으며, 암조건은 알루미늄 호일로 광을 완전히 차단하고 최종 발아율만 조사하였다. 발아율을 조사한 결과, 명조건은 0.75±0.80%, 암조건은 5.50±1.55%로 조사되어 형태적인 휴면과 생리적인 휴면을 모두 갖는 것으로 판단하였다. 애기똥풀의 생태적인 환경을 고려하여 12주의 Summer temperature(S12, 25/15℃, 16/8h)로 층적하고 연속하여 Autumn temperature(A, 15/10℃, 16/8h)를 4주(A4)와 8주(A8)로 달리하여 종자의 휴면타파를 유도하였다. 층적 후 발아율은 모두 증가되었으며, S12-A4(54%)는 S12-A8(24.5%)에 비해서 휴면타파에 효과적이었다. 휴면타파 효과의 증진을 위해 층적처리한 종자를 500ppm의 GA₃와 GA₄₊₇에 각 24시간동안 4℃에서 침지시킨 뒤 동일한 조건에 파종하였다. GA₃가 처리된 S12-A4는 발아율이 82.0%, S12-A8는 30.8%로 유의적으로 증가하였으나 GA₄₊₇ 처리는 S12-A4(48.5%)와 S12-A8(21.3%)에서 발아율 향상 효과가 없었다. 결론적으로 애기똥풀의 휴면타파를 위해서 12주의 Summer temperature와 4주의 Autumn temperature 변온층적과 추가 GA₃ 처리가 휴면타파를 위한 효과적인 처리방법으로 판단된다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.4 s.50
• /
• pp.77-84
• /
• 2006

Recently, as large structures such as high-rise building and long span bridge become lighter and more flexible, the necessity of structural control for reducing excessive dynamic response due to seismic excitation is increased. In this study, a semi-active base isolation system using Magneto-Sensitive (MS) rubbers is proposed to effectively protect structures against earthquakes. MS Rubber is a class of smart controllable materials whose mechanical properties change instantly by the application of a magnetic field. To demonstrate the performance of this device, the MS Rubber isolation system is compared to Lead-Rubber Bearing (LRB) isolation systems and judged based on computed responses to several historical earthquakes. The MS Rubber isolation system is shown to achieve notable decreases in base drifts over comparable passive systems with no accompanying increase in base shears or in accelerations imparted to the superstructure. The proposed MS Rubber system is shown to perform better than the passive isolation system.