• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.302-307
• /
• 2009

물리적인 조류제어 기술에 해당하는 수류 차단막(이후 차단막)은 유입하천의 수류를 차단 또는 우회시켜 영양염류가 저수지의 유광층으로 공급되는 것을 차단하고 본류 수역으로의 조류 확산을 방지하는 기능이 있어 일본에서는 저수지 녹조제어 대책으로 자주 활용된 바 있다. 그러나 이러한 차단막은 국내 저수지와 같이 홍수시 유입 유속이 크고 수위변동이 심한 환경에서는 설치효과가 검증되지 않아 현장적용에 앞서 수치모의를 통한 효과 검증이 선행되어야 하며, 최적 규모와 위치 선정도 필요하다. 본 연구에서는 수위변동이 심한 국내 저수지 특성을 고려하여 차단막이 수위변화에 따라 상하로 이동할 수 있도록 기존 CE-QUAL-W2(이후W2) 모델의 알고리즘을 수정하고, 대청호에서 다양한 수리 수문조건에서 차단막의 기작과 효과를 예측하기 위해 가뭄년(2001년)과 평수년(2004, 2006년)을 대상으로 각각 모델을 적용하였다. 차단막 설치 예정지점은 소옥천 하류(7 m 깊이)와 댐으로부터 각각 14.9 km, 27.4 km 상류에 위치한 회남대교 아래 지점(10 m 깊이)과 대정리(10 m 깊이)로 가정하고, 모의 시나리오는 차단막을 설치하지 않은 경우(S-1), 소옥천 하류에 단독으로 설치한 경우(S-2), 소옥천과 대정리에 설치한 경우(S-3), 모든 지점에 설치한 경우(S-4)를 비교하였다. 차단막 설치에 따른 수문년 및 계절별 수질개선 효과(S-1에 대한 S-4 농도 저감 비)를 비교한 결과, 대청호에서 녹조문제가 가장 심각했던 2001년 6월$^{\sim}$8월 기간 동안 차단막은 봄-여름에 걸쳐 모든 비교 지점(회남, 댐, 추동, 문의수역)에서 Chl-a 농도를 최저(문의수역) 30%에서 최고(회남수역) 70% 정도 저감하는 효과를나타냈다. 평수년인 2004년과 2006년에는 강우사상에 따라 차단막 설치에 따른 Chl-a의 농도 저감 효과가 지점별로 다르게 나타났으며, 큰 강우사상이 6월, 7월, 8월에 걸쳐 골고루 발생한 2004년에 비해 7월 한 달 동안 집중된 2006년에 설치효과가 크게 나타났다. 수역별로 차단막의 설치효과를 비교해 보면, 유입수의 영향을 직접 받는 회남수역과 추동수역이 댐 앞과 문의수역에 비해 차단막 설치에 따른 Chl-a 농도의 저감 효과가 큰 것으로 나타났다. 그러나, 큰 홍수가 유입할 때 차단막 상류부에 집적된 조류의 일부가 수류의 포획(Entrainment) 기작에 의해 저수지 내부로 유입되는 것으로 확인되어 차단막 효과를 극대화하기 위해서는 홍수 전 차단막 상류부에 집적된 조류의 처리대책이 필요할 것으로 판단된다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.2
• /
• pp.61-67
• /
• 2001

Development of a barrier system for floating debris at river is introduced. The system is to prevent pollution of coastal water caused by marine debris which originates from land. The system consists of harrier boom, mooring system and boom winder. The harrier boom, which is self-inflatable with circular band spring, guides floating debris to a collecting conveyer system. Design parameters of the harrier system were reviewed and its design criteria were established. Based on the established design criteria, a pilot harrier system was built and tested at Tanchon branch of the Han river. It is proved that the suggested system is very efficient to collect floating debris at river.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.3
• /
• pp.65-73
• /
• 2001

Herein, a theoretical method based on the catenary model Is applied to obtain the tension and drag forces acting on the trash curtain which is deployed at river for the prevention of floating debris inflow into the ocean. Under the assumption that fluid drag is perpendicular to the trash curtain, the tension and drag forces are uniform along the trash curtain. As a numerical model, the trash curtain is moored both symmetrically and asymmetrically with respect to the flow. The tension and drag forces on the trash curtain are investigated according to the change of Bap ratio and inclined angle of the trash curtain. Numerical results show that tension parameter is increased as the gap ratio is increased. It is found that tension parameter is reduced as the inclined angle is increased in the case of asymmetric deployment. The numerical model is applied to the specific problem for the trash curtain (200m) deployed at the Tancheon on the Han river. The maximum inflow velocity that anchor system can endure is 2m/sec.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.2
• /
• pp.63-71
• /
• 2003

The main functions of containment boom for marine floating debris are to prevent spreading of the marine floating debris and to effectively collect the trash skimmer. The design characteristics of containment boom for marine floating debris in wave, current and wind are investigated. The response of a containment boom on the current is a function of a number of parameters, such as geometric characteristics, buoyance/weight ratio and towing velocity. To understand the relationship between these design parameters more clearly, a series of tests with three models with the variation of current speed and gap ratio was conducted. The model tests results are developed to new numerical equation that is tension prediction method of containment boom for marine floating debris. Also its is compared with open sea experimental results.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.225-226
• /
• 2019

육상에서 발생한 부유쓰레기는 하천을 통해 해상으로 유입되어 선박 프로펠러 파손, 항로 점유 등 선박 운항 안정성에 지대한 영향을 미친다. 본 연구는 육상 기인 부유쓰레기의 해양 확산을 방지하고 나아가 선박 운항 안정성 확보를 위한 차단막과 차단막의 부유쓰레기 차단 성능 확보를 위한 플랫폼 및 계류, 앵커시스템 개발을 연구 목표로 한다. 본 구조물의 우선 설치 대상 해역은 가덕도 남동부 해안으로, 우천시 혹은 태풍 내습시 육상에서 발생하는 많은 해양쓰레기의 확산이 이루어지는 지역이다. 대상 해역의 환경하중 조건에서 플랫폼이 정상기능을 수행하도록 수치해석 기법을 기반으로 플랫폼 및 계류, 앵커시스템을 설계하고 설계 기준 적합성을 평가하였다.

• Fire Science and Engineering
• /
• v.15 no.2
• /
• pp.53-58
• /
• 2001

This study was undertaken to evaluate the performance of flame retardant for fire precaution from sparks at welding-cutting process in industry sites such as shipbuilding yard and chemical factory. As the results of the performance experiment, six kinds of welding blanket in samples that are used commercially had enough in the performance of flame retardant. Nevertheless, the performance to fire precaution un welding blanket shows that the coaling product of two kinds with fiber glass is not sufficient. The lower oxygen index to welding blanket is considered that it is more than 30 in domestic standard. We suggested that the performance improvement of flame retardant for welding blanket need continuously, and the guideline of the flame retardant to welding blanket should be considered and established.

• Fire Science and Engineering
• /
• v.18 no.2
• /
• pp.73-78
• /
• 2004

This study investigated about smoke/heat interception screen that can protect underneath of fire door and floor when occur fire, and keep out leakage or diffusion of smoke/heat. In this study, to considered differential pressure form smoke control area and mechanical force by fluid buoyancy of smoke when occur fire and stream of heat, are analyzed to used $ANSYS^{\circledR}$ of finite element analysis code. It presented direction of optimal design of smoke/heat interception screens that can minimize loading condition from study results, and helped that construct basic engineering data of smoke/heat interception systems as that utilize its shape design of smoke/heat interception screens.

• Fire Science and Engineering
• /
• v.32 no.1
• /
• pp.66-75
• /
• 2018

A barrier installed within a rack plays a significant role in delaying the initial spread of fire but it can be an obstacle to a ceiling-type sprinkler installed for extinguishing fires and for supplying fire extinguishing water. An in-rack sprinkler and a barrier can be applied at the same time, but a study on a barrier's ability to delay fire spread or its effect on the in-rack sprinkler is needed. Accordingly, this study examined the effect of a barrier on the delay of fire spread and the in-rack sprinkler according to installation conditions through the reduced scale fire test. As a result, the delay in fire spread increased more than four times when a horizontal barrier and a vertical barrier were installed at the same time. The temperature was also increased two to three times with the compartment, resulting in the early operation of the in-rack sprinkler.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.107-112
• /
• 2018

Shielding effectiveness (SE) improvement with EMI shield layers fabricated by conformal spray coating system was studied. Silver or Nickel powder filled acrylic resin were sprayed on the samples. We compared the performance with the viscosity of 400 cPs and 100 cPs cases. The thickness range of the coating layer was 20 to 50 um for the silver, 60 to 120 um for the nickel. The shielding effectiveness was measured by ASTM D4935 using coaxial type TEM-cell. The silver-filled resin showed much better performance than that of the nickel-filled resin. The shielding effectiveness increased almost proportional to the thickness of the coating layers until being saturated around 63 dB for the silver-layer or around 34 dB for the nickel-layer. The best performance measured in this study was the shielding effectiveness of 63 dB with $35{\mu}m-thick$ of silver-layer.

• Restorative Dentistry and Endodontics
• /
• v.35 no.5
• /
• pp.368-373
• /
• 2010

Objectives: This study investigated the effect of infection control barrier thickness on power density, wavelength, and light diffusion of light curing units. Materials and Methods: Infection control barrier (Cleanwrap) in one-fold, two-fold, four-fold, and eightfold, and a halogen light curing unit (Optilux 360) and a light emitting diode (LED) light curing unit (Elipar FreeLight 2) were used in this study. Power density of light curing units with infection control barriers covering the fiberoptic bundle was measured with a hand held dental radiometer (Cure Rite). Wavelength of light curing units fixed on a custom made optical breadboard was measured with a portable spectroradiometer (CS-1000). Light diffusion of light curing units was photographed with DSLR (Nikon D70s) as above. Results: Power density decreased significantly as the layer thickness of the infection control barrier increased, except the one-fold and two-fold in halogen light curing unit. Especially, when the barrier was four-fold and more in the halogen light curing unit, the decrease of power density was more prominent. The wavelength of light curing units was not affected by the barriers and almost no change was detected in the peak wavelength. Light diffusion of LED light curing unit was not affected by barriers, however, halogen light curing unit showed decrease in light diffusion angle when the barrier was four-fold and statistically different decrease when the barrier was eight-fold (p < 0.05). Conclusions: It could be assumed that the infection control barriers should be used as two-fold rather than one-fold to prevent tearing of the barriers and subsequent cross contamination between the patients.