• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.7
• /
• pp.461-470
• /
• 2013

The capacity for tracing relationships among various artifacts which are created at each phase of software system development is essential for software quality management. Software release refers to delivering a set of newly created or changed artifacts to customers. The relationships among artifacts which comprise software release must be traced so that the work for customer's requirement of change and functional enhancement is effectively established. And release management can be effectively realized through the integration of configuration management and change management. This paper proposes the technique for supporting change management of artifacts and for tracing relationships of artifacts which comprise software release through the integrated environment of personal workspace and configuration management system. In the proposed environment, the visualized version graph and automated tagging function are used for tracing relationships of artifacts.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.565-568
• /
• 2003

2세대 초전도 선재로 알려져 있는 $YBa_2Cu_3O_{7-\delta}$ coated conductor는 금속모재/완충층/초전도층/보호층의 구조를 가진다. 2개 이상의 산화물 다층 박막으로 이루어진 완충층은 금속기판의 집합조직을 초전도층까지 전달하는 역할, 금속기판의 금속이 초전도층으로 확산되어 초전도층의 전기적 특성을 열화시키는 것을 막아주는 확산장벽으로의 역할 등을 수행한다. 1차 완충층은 금속기판의 집합조직을 유지하여야하며, 금속기판의 산화를 방지하면서 증착 되어야 한다. coated conductor 제조를 위한 첫 단계로 Pulsed Laser Deposition법을 이용하여 cube texture된 Ni 기판 위에 $Y_2O_3$ 박막을 증착 하였다. 최적의 증착 조건을 찾기 위해 증착 챔버의 산소 및 $H_2/Ar$ 혼합가스 분압과 기판온도를 변화시키면서 증착 하였다. $Y_2O_3$층의 (100) 집합조직은 기판온도 $600{\sim}700^{\circ}C$와 산소 분압 $0.01{\sim}0.1mTorr$에서 증착된 Y2O3 박막에서 금속기판과 유사한 집합조직을 얻을 수 있었다. 최적의 증착 조건에서 $Y_2O_3$ (222) ${\Phi}-scan$의 full width at half maximum (fwhm)이 $11^{\circ}$이고 (400) ${\omega}-scan$ fwhm은 $6^{\circ}$이었다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.692-697
• /
• 2006

The importance about the maintenance consideration of the building has a great impact and regarding the life continuation of the building the many interest is becoming intensively. The housing lot of the heart of urban at the capital region has insufficient recently and the construction of the ground complex building in solution for the insufficiency is increasing at the rapid pace. The ground complex building is brings the maximization of land use from inside the site, but maintenance consideration phase is caused by administration cost share and administration bound limit where person is concerned for a many problem point it contains. The objective of the present paper is that the building is maintain an efficiency initially and is improve in order to develop guide line for a maintenance consideration improvement from design phase. According as literature research and question research is enforce, the paper is escape problem point the maintenance consideration and is bring up guide line for the architectural plan field and the maintenance consideration improvement of the building. Result of the study is expected a help in maintenance consideration improvement during life cycle of the building

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.3
• /
• pp.234-240
• /
• 2007

Purpose: In this study we propose a block-iterative method for reconstructing Compton scattered data. This study shows that the well-known expectation maximization (EM) approach along with its accelerated version based on the ordered subsets principle can be applied to the problem of image reconstruction for Compton camera. This study also compares several methods of constructing subsets for optimal performance of our algorithms. Materials and Methods: Three reconstruction algorithms were implemented; simple backprojection (SBP), EM, and ordered subset EM (OSEM). For OSEM, the projection data were grouped into subsets in a predefined order. Three different schemes for choosing nonoverlapping subsets were considered; scatter angle-based subsets, detector position-based subsets, and both scatter angle- and detector position-based subsets. EM and OSEM with 16 subsets were performed with 64 and 4 iterations, respectively. The performance of each algorithm was evaluated in terms of computation time and normalized mean-squared error. Results: Both EM and OSEM clearly outperformed SBP in all aspects of accuracy. The OSEM with 16 subsets and 4 iterations, which is equivalent to the standard EM with 64 iterations, was approximately 14 times faster in computation time than the standard EM. In OSEM, all of the three schemes for choosing subsets yielded similar results in computation time as well as normalized mean-squared error. Conclusion: Our results show that the OSEM algorithm, which have proven useful in emission tomography, can also be applied to the problem of image reconstruction for Compton camera. With properly chosen subset construction methods and moderate numbers of subsets, our OSEM algorithm significantly improves the computational efficiency while keeping the original quality of the standard EM reconstruction. The OSEM algorithm with scatter angle- and detector position-based subsets is most available.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.11
• /
• pp.905-911
• /
• 2015

In this study, to examine the effect of a hole size change(smaller hole diameter) in the outer region of the lower-support-structure-bottom plate(LSSBP) on the reactor core-inlet flow-distribution, simulations were conducted with the commercial CFD software, ANSYS CFX R.15. The predicted results were compared with those of the original LSSBP. Through these comparisons, it was concluded that a more uniform distribution of the mass flow rate at the core-inlet plane could be obtained by reducing the hole size in the outer region of the LSSBP. Therefore, from the nuclear regulatory perspective, design change of the hole pattern in the outer region of the LSSBP may be desirable in terms of improving both the mechanical integrity of the fuel assembly and the core thermal margin.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2003.05a
• /
• pp.15-15
• /
• 2003

Hydroxylapatite는 석회동굴 생성물의 표면이나 또는 생성정지선에서 쉽게 관찰할 수 있으며, 암적갈색을 띄고 있어 생성물의 흑화현상에 기여하고 있다. 특히, 박쥐 서식처나 그 주위의 동굴생성물 표면에서 다량의 hydroxylapatite가 관찰된다. 본 연구에서는 SEM-EDS와 EPMA, XRD를 이용하여 고수동굴(충북 단양군 가곡면 고수리, 천연기념물 제256호, 1976년에 개방), 성류굴(경북 울진군 근남면 장평리, 천연기념물 제155호, 1963년에 개방)과 기하동굴(강원도 평창군 미탄면 마하리, 미개방동굴) 내에서 채취한 hydroxylapatite 로 구성되어 있는 흑색 피각의 현미경적 조직을 연구하였다. Hydroxylapatite 피각은 모암(고수동굴과 성류굴에서는 calcite, 기하동굴에서는 calcite와 dolomite)의 표면에 약 0.3 mm의 두께로 존재하며 hydroxylapatite가 calcite와 dolomite를 교대하고 있다. 피각의 단면은 전자현미경하에서 비교적 밝은 부분인 hydroxylapatite와 상대적으로 어둡게 보이는 cellophane으로 구성되어 있다. Cellophane은 피각의 바깥 부위에 그리고 hydroxylapatite은 피각의 안쪽에 주로 분포하며 hydroxylapatite가 cellophane을 교대하고 있는 것으로 보아 cellophane으로부터 hydroxylapatite가 형성된 것으로 보인다. cellophane과 hydroxylapatite가 보여주는 조직을 구분하면: 1) 교질조직 (colloform texture) (두께: 1.2 ~ 3 $\mu\textrm{m}$, cellophane 층에 지름 0.5 ~ 1 $\mu\textrm{m}$의 voids가 존재), 2) 망상조직 (reticulate texture) (voids 크기 지름 0.5 ~ 1 $\mu\textrm{m}$), 3) 섬조직 (sea-and-island texture) (크기: 지름 2 ~ 4 $\mu\textrm{m}$) 등이다. Cellophane이 주로 분포하는 피각의 가장자리 부분에는 망상조직과 섬조직 및 void (지름: 약 10 $\mu\textrm{m}$)가 다량 존재하여, 망상조직과 void가 분포하는 곳에는 SO$_2$가 함유된다. 피각 표면에서 Ca, P, Si, Al 이외에 C와 S가 다량 함유되어 있는 막대모양의 박테리아 (지름: 1 $\mu\textrm{m}$, 길이: 1 ~ 10 $\mu\textrm{m}$)들의 집합체가 관찰되는데 박테리아가 피각 표면에 닿아 있는 부분은 박테리아 사이에 hydroxylapatite가 채워져 하나의 덩어리를 이룬다. 망상조직의 void의 크기와 박테리아의 지름이 비슷한 것으로 보아 망상조직은 박테리아 주위에 hydroxylapatite가 침전되고 그 후 박테리아가 있던 자리가 void로 남게 되면서 형성된 것으로 생각되며, 망상조직과 void에 존재하는 SO$_2$는 박테리아로부터 유래된 것으로 사료된다. 모암에는 P가 함유되어 있지 않기 때문에 hydroxylapatite의 P는 외부 물질(박쥐 분비물)에서 유래된 것으로 생각된다. hydroxylapatite 피각의 조직이 형태적으로 박테리아와 비슷한 것은 hydroxylapatite 생성에 미생물이 관여했다는 것을 암시한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.9
• /
• pp.115-125
• /
• 1995

부품가공에 있어서 생산성향상을 위하여 버제거를 위한 고도의 기술이 더욱 중요하게 되었다. 특히 CIM 체제에서는 버제거의 자동화를 위하여 가공중에 발생하는 버형성과 파단현상을 정량적으로 예측할 필요성이 더욱 커졌다. 이미 연구된 2차원절삭에서의 버형성 모델을 실제적인 3차원절삭에 적용하기 위하여 기존의 모델을 수정하는 작업이 이루어졌다. 3차원 절삭모델로는 절삭인선에 수직한 면에서의 칩과 공구의 상대운동에 의해서 결정된다고 하는 Rubenstein의 가정이 사용되었다. 본연구에서 다루에되는 롤오버(roll-over) 버는 항상 공구진행방향으로 발생하기 때문에 3차원절삭에서의 버형성을 공구진행방향의 평면내에서의 2차원 절삭의 집합 으로 가정하였다. 공구의 기울림각(inclination angle)이 커질수록 버형성의 크기나 파단면의 크기가 감소하였다. 두종류의 파단이 버형성중에 관찰되었다. 하나는 가공물 끝면에 평행하게 파단면이 발생하였으며 다른 하나는 이에대하여 기울어진 파단이 일어났다. 가공물 끝면에 평행한 경우는 수정된 모델로부터 등가초기공구위치( equivalent initial tool distance)로부터 예측이 가능하며 기울어진 경우는 이결과와 공구의 기울림각으로부터 파단위치를 예측할 수 있다.

• KOMUNHWA
• /
• no.63
• /
• pp.5-42
• /
• 2004

Several new results were come from the third excavation of the Isimila site in Tanzania which is well known for typical Acheulean industry from the late Middle Pleistocene deposits. The research was carried out in 2003 by the Institute of Cultural Propert

• Environmental and Resource Economics Review
• /
• v.22 no.2
• /
• pp.329-365
• /
• 2013

The purpose of this paper is to measure economy and environment efficiencies under fossil fuel and environment regulation by countries for 2000-2009. Distinguishing 83 countries with three groups of OECD, upper-middle, and low countries, we compare four models such as environment oriented, economy-oriented, environment-economy oriented, and two-stage types, which include a desirable output, GDP and an undesirable output, pollutant together in the production possibility set. OECD countries relatively showed high economy efficiency and low environment efficiency, whereas Non-OECD countries showed high environment efficiency and low economy efficiency. OECD countries reported a higher possibility to reduce fossil fuel and $CO_2$ emission.

• The Korean Journal of Archival Studies
• /
• no.53
• /
• pp.201-228
• /
• 2017

Recently, public organizations have been improving the classification in order to introduce records management reference table in accordance with the act on the management of public archives. However, there is no system to mount the revised records management reference table, and there is a problem in usability. The purpose of this study is to design a system function to manage the classification which is the foundation of records management for public organizations. In order to design the function, interviews with the records management specialists of the five public organizations were conducted. Based on this, we have designed a multi-classification system registration function, a hierarchical structure setting function of records, and a record management standard management function.