• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.1
• /
• pp.11-18
• /
• 2002

Directional breaking waves are generated by the component wave focusing both in direction and frequency based on constant wave steepness and constant wave amplitude spectrum models. The generated breaking waves are classified in the incipient, single and multi breaking waves. The characteristics of directional breaking waves are investigated in terms of surface profile parameters of wave crest steepness and asymmetry. The evolution of breaking wave characteristics is analyzed in a view of focusing efficiency. It shows that the front steepness and vertical asymmetry play an important role in breaking process, while the crest rear steepness and horizontal asymmetry are nearly constant during the process. The superposition of directional components greatly enhances the focusing efficiency and it suggests that characteristics of directional breaking waves may significantly different from uni-directional ones.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1103-1107
• /
• 2009

최근 기상이변에 따른 국지성 호우 등으로 인하여 지역별로 홍수량 차이가 많이 나고 있는 상황으로 유역내 중요시설물 및 인명의 보호를 위해서는 유역의 특성을 정확하게 반영한 홍수분석이 필수적인 실정이다. 유역 주요지점의 정확한 홍수량을 산정하기 위해서는 지역특성이 반영된 호우를 선정하고, 유출모의를 위한 유역특성이 잘 구현되어야 한다. 이를 위해서는 홍수량산정에 영향을 주는 매개변수의 정확한 산정이 필요하며 본 연구에서는 미공병단(US Army Corps)에서 개발하여 배포한 차세대 프로그램인 HEC-HMS(v3.3)를 이용하여 집중시간, 저류상수, Curved Number, 감수상수, 초기손실, 초기기저유량, Threshold 등 7가지 매개변수에 대한 최적화를 수행하였다. 종래에는 첨두홍수량을 중시하여 집중시간과 저류상수는 최적화하고 나머지 변수들은 실측치 및 계산값을 적용하였으나, 금번 연구에서는 첨두홍수량 및 총유출량 모두 관측값에 최대한 일치하도록 7가지 매개변수를 최적화하는 방안 및 최적화시 초기값 선정이 매개변수 최적화에 미치는 영향을 연구하였다. 매개변수 최적화 순서는 먼저 전체적인 평균유출량 또는 평균유출고가 실측치와 모의치 간에 일치하도록 CN, RC를 보정하고 다음 단계로 첨두발생시간이 일치하도록 Tc, K를 보정하고, 마지막으로 홍수 수문곡선의 형태를 결정하는 나머지 매개변수를 조정하여 전체적인 수문곡선의 형태와 첨두홍수량이 일치하도록 수행하였으며, Tc, K, CN 등의 중요 매개변수는 신뢰구간(계산치의 0.8${\sim}$1.2)을 설정하여 목적함수의 수렴을 유도하였다. 위를 이용하여 수렴된 매개변수들로 강우-유출 모의를 분석한 결과를 기존 홍수사상과 비교한 결과 상당히 근접한 결과를 도출할 수 있어, 매개변수는 7가지 모두에 대한 최적화를 가능한 것으로 연구되었으나 목적함수들의 수렴되는 과정에 대해서는 좀 더 심도있는 고찰이 필요할 것으로 판단된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.16-23
• /
• 2020

Water pipes are important facilities and consist of pipes of various specifications and materials. The annual average number of earthquakes in Korea is steadily increasing. Therefore, in case of the water pipe, it is estimated necessary to prepare for earthquakes. Damages to the water pipe by the earthquake can cause problems such as water supply and fire suppression, and cause damage to life and property. In Korea, however, it is difficult to find examples of seismic performance evaluation of water pipes based on experimental study. Damage to the water pipes by the earthquake is caused by the displacement-controlled behavior of the ground which is the liquifaction and fault lines. Especially, The damage to the water pipes by the earthquake is concentrated on the joint of the pipe. In particular, piping less than 200mm in diameter was found to be dangerous. Thus, in this study, the seismic and settlement performance of iPVC buried water pipes with fixed joints with a clamp of 150mm was evaluated with a test approach.

• Electrical & Electronic Materials
• /
• v.6 no.2
• /
• pp.137-146
• /
• 1993

유한요소법을 이용하여 반도체 해석을 하는 경우 국부적인 overshoot, 진동 및 해의 발산등의 문제점등이 발생하기 쉽다. 이는 지배방정식의 특성에 좌우되는 경우가 많은데 특히 반도체 전류연속 방정식을 처리하는 데는 그 해석이 매우 불안정하다. 본 연구에서는 유한요소법을 반도체 해석에 적용하는 경우 해의 발산원인을 적용 방정식의 수치적 안정도 검사에 의하여 도출하였으며 이 요인이 요소상수 m의 값에 좌우됨을 밝혔다. 또한 요소상수가 후치조작에 의해서만 계산될 수 있는 단점을 보완하기 위하여 적응요소법을 도입하여 프로그램으로 구현함으로써 임의의 초기 요소망과 초기치에 대해서도 자동적으로 해의 수렴을 얻을 수 있는 적응해석 프로그램을 개발하였다. 본 프로그램의 효용성을 검증하기 위하여 GaAs MESFET 모델을 선정하여 계산하였고 산출 결과를 검토해 본 결과 임의의 초기치에 대해서도 강인한 수렴성을 얻을 수 있었으며 요소 분할이 필요한 부위에만 집중됨으로써 비교적 적은 수의 요소만으로도 해를 얻을 수 있음을 확인하였다.

• Journal of Korea Water Resources Association
• /
• v.40 no.2 s.175
• /
• pp.171-182
• /
• 2007

In this study, as a method for decreasing the confidence interval of the estimates of Clark hydrograph's concentration time and storage coefficient, regression equations of these parameters with respect to those of rainfall, meteorology, and basin characteristics are derived and analyzed using the Monte Carlo simulation technique. The results are also reviewed by comparing them with those derived by applying the Bootstrap technique and empirical equations. Results derived from this research are summarized as follows. (1) Even in case of limited rainfall events are available, it is possible to estimate the mean runoff characteristics by considering the affecting factors to runoff characteristics. (2) It is also possible to use the Monte Carlo simulation technique for estimating and evaluating the confidence intervals for concentration time and storage coefficient. The confidence intervals estimated in this study were found much narrower than those of Yoo et al. (2006). (3) A supporting result could also be derived using the Bootstrap technique. However, at least 20 independent rainfall events are necessary to get a rather significant result for concentration time and storage coefficient. (4) No empirical equations are found to be properly applicable for the study basin. However, empirical equations like the Kraven(I) and Kraven(II) are found valid for the estimation of concentration time, on the other hand the Linsley is found valid for the storage coefficient In this study basin. But users of these empirical formula should be careful as these also provide a wide range of possible values.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.124-131
• /
• 1987

The parameteric instability of the cantilever beam carrying two concentrated masses subjected to a periodic follower force is investigated theoretically and experimentally. The effects of the constant follower force and the periodic follower force the mass ratio and the location of the concentrated mass on the parametric instability of the system are discussed. In experiment, the nonconservative follower force is produced by the magnetic force of the electromagnet. The theoretical and the experimental results on the parameteric instability are in good agreement each other.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.84-84
• /
• 2004

다단 냉간단조 공정에서는 결함이 없는 재료의 유동, 금형내부의 완전한 충만과 금형의 수명향상 등을 위하여 예비성형체의 설계가 중요시되고 있다. 특히 최근 제품의 정밀도에 관심이 집중되어 냉간 상태에서 완제품으로 성형하여 후속 기계가공을 없앰으로써 재료의 절약, 에너지 절감, 가공공정수 단축 등 냉간단조를 고부가가치 가공의 유력한 수단으로 응용하려는 추세이다. 이러한 경우 예비성형체의 형상은 제품의 정밀도와 금형의 수명에 지대한 영향을 미친다.(중략)

• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.588-594
• /
• 2017

Permanent magnet assisted synchronous reluctance motors (PMa-SynRM) show higher efficiency and power density compared to conventional induction motors for high speed railroad traction systems. Furthermore, 5-phase PMa-SynRMs have lower torque ripple and higher power density than 3-phase systems. Therefore, the 5-phase PMa-SynRM is suitable for high-speed railway traction systems. In this study, 3kw 3-phase and 5-phase PMa-SynRM models were optimized using lumped parameter model and genetic algorithm, and their characteristics were compared. The optimized models are fine-tuned using finite element analysis. The final models of the 3-phase and 5-phase PMa-SynRMs are fabricated and tested to verify the analysis results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5300-5305
• /
• 2011

Displacement, contact pressure and moment which are developed in rigid beam on the Winkler foundation and 2 parameter Winkler foundation were derived. It can be seen that moment distribution along with rigid beam on the Winkler foundation are regardless of spring constant and the moments calculated from assuming linear spring constant were greater than those from assuming constant spring constant. Simple calculation revealed that the maximum moment developed in the rigid beam on the 2 parameter Winkler foundation was larger than that developed in the rigid beam on the Winkler foundation.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.97-100
• /
• 2008

Mount Fuji is the focus of intense study because of its potential hazard signaled by seismic, geologic and historical activity. Based on extensive seismic data recorded in the vicinity of Mt. Fuji, coda quality factor ($Q_c^{-1}$) using a single scattering model hypothesis, and intrinsic and scattering quality factor $(Q_i^{-1}$ and $Q_s^{-1})$ using the Multiple Lapse Time Window Analysis (MLTW) method was measured. To focus the study on the magmatic structure below Mt. Fuji, to the data were separated into two groups: a near-Fuji region of rays traversing an area with radius 5 km around the summit (R < 5 km), and a far-Fuji region of rays beyond a radius of 20 km around the summit (R > 20 km). The results of the study have a small error range due to the large data sample, showing that all $Q^{-1}$ values in near-Fuji area are greater than those of far-Fuji area, and $Q_i^{-1}$ for both the near and far-Fuji area is higher than $Q_s^{-1}$ at high frequencies. The $Q_i^{-1}$ values of the near-Fuji area are lower than those of the other volcanic areas considered, while values of $Q_s^{-1}$ are not. The low $Q_i^{-1}$ for the volcanic region of near-Fuji suggests that the magmatic activity, or percent of partial melt, at Mt. Fuji is not as active as hot spot volcanoes such as Kilauea, Hawaii.