• Economic Analysis
• /
• v.27 no.3
• /
• pp.61-96
• /
• 2021

This study is to structurally examine the regional income disparity in Korea. It measures the regional income inducement by household consumption expenditure per unit income, and the regional interdependency of income using 2005 and 2015 Regional Input-Output Tables of 16 provincial regions of Korea. The results are as follows. Firstly, the income inducement by consumption expenditure per unit income decreased overall, mainly due to the decrease in the income inducement of other regions than due to that of their region. Secondly, in many regions, the inter-relational income dependency per unit income decreased also, this too, mainly due to the decrease in the income transfer to other region. And, the income inducement effects of consumption expenditure per unit income of Seoul and Gyeonggi, which occupy a large portion of the Korean economy, were lower than that of other regions, but took the largest portion of income inducements generated by other regions as well as by themselves and absorbed the income transfers from other regions the most. The higher income inducement and income absorption in Seoul and Gyeonggi by consumption expenditure of other regions were mainly because of the high share in service of their consumption structure, the progress in tertiarization of their industrial structure, and the high wage portion. These results also mean that viewed from the regional interdependency of income, the income of Seoul and that of Gyeonggi are highly dependent on the income of other regions. Especially, Gyeonggi which leads the overseas exports of high-tech based manufactured products, has other external factors that contribute to their high income inducement, whereas, Seoul which shows high income absorption using its inter-relations with other domestic regions based on the services, has an income-generating structure that is sensitive to other regions' economic situation. Amid overall declines in regional income inducements and in income transfers, and continuing concentrations into Seoul and Gyeonggi regions, to alleviate the regional disparity, the regional industry policies should, rather than benchmarking the policies of the two concentrated regions, enhance their own inter-regional relationships by strengthening the comparative advantage of their regionally specialized industry.

• Journal of Mushroom
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2023

This study addresses the current demand of the Korean mushroom export industry to establish an export strategy and governing policies.The enoki mushroom exports increased by 89% in 2009 and 23% in 2010, resulting in the largest export volume (17,163 tons) and export value ($26,292,000) being recorded in 2010. In contrast, exports in 2020 yielded only $18,525,000, which was 29% lower than that in 2010. In case of king oyster mushrooms, exports increased by 10% in 2012, 13% in 2013, and 2% in 2014, maintaining a moderate-growth trend. Moreover, Korea's mushroom exports are focused on a few specific countries. Enoki mushrooms accounted for more than 50% of the total exports to North America and Vietnam from 2012 to 2022, whereas king oyster mushrooms accounted for more than 50% of the total exports to Europe and North America (USA and Canada) from 2009 to 2022. Another characteristic trend in Korean mushroom exports is the diversification of export markets. The number of countries importing enoki mushrooms and king oyster mushrooms from Korea is increasing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.231-238
• /
• 2023

Since there is a limit to the physically visible horizon that sensors for autonomous driving can perceive, complementary utilization of digital map data such as a Local Dynamic Map (LDM) along the probable route of an Autonomous Vehicle (AV) is proposed for safe and efficient driving. Although the amount of digital map data may be insignificant compared to the amount of information collected from the sensors of an AV, efficient management of map data is inevitable for the efficient information processing of AVs. The objective of this study is to analyze the efficiency of information use and information processing time of AV according to the expansion of the active section of LDM-based static road and traffic information. To carry out this objective, a microscopic simulator model, VISSIM and VISSIM COM, was employed, and an area of about 9 km × 13 km was selected in the Busan Metropolitan Area, which includes heterogeneous traffic flows (i.e., uninterrupted and interrupted flows) as well as various road geometries. In addition, the LDM information used in AVs refers to the real high-definition map (HDM) built on the basis of ISO 22726-1. As a result of the analysis, as the electronic horizon area increases, while short links are intensively recognized on interrupted urban roads and the sum of link lengths increases as well, the number of recognized links is relatively small on uninterrupted traffic road but the sum of link lengths is large due to a small number of long links. Therefore, this study showed that an efficient range of electronic horizon for HDM data collection, processing, and management are set as 600 m on interrupted urban roads considering the 12 links corresponding to three downstream intersections and 700 m on uninterrupted traffic road associated with the 10 km sum of link lengths, respectively.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.1
• /
• pp.21-40
• /
• 2023

This study analyzed the cold air characteristics of the Nakdong Jeongmaek, which is advantageous for the formation of cold air that can flow into the city, in order to suggest the wind ventilation corridor plans, which have recently been increasing interest as a way to improve the urban thermal environment. In addition, based on the watershed analysis, specific cold-air watershed areas were established and management plans were suggested to expand the cold air function of the Nakdong Jeongmaek. As a result of the analysis of cold air in the Nakdong Jeongaek, cold air was strongly generated in the northern forest of the Jeongamek, and flowed into nearby cities along the valley topography. On average, the speed of cold air was high in cities located to the east of the Jeongmaek, while the height of cold air layer was high in cities located to the west. By synthesizing these cold air characteristics and watershed analysis results, the cold-air watershed area was classified into 8 zones, And the plans were proposed to preserve and strengthen the temperature reduction of the Jeongmaek by designating the zones as 'Conservation area of Cold-air', 'Management area of Cold-air', and 'Intensive management area of Cold-air'. In addition, in order to verify the temperature reduction of cold air, the effect of night temperature reduction effect was compared with the cold air analysis using weather observation data. As a result, the temperature reduction of cold air was confirmed because the night temperature reduction was large at the observation station with strong cold air characteristics. This study is expected to be used as basic data in establishing a systematic preservation and management plan to expand the cold air function of the Nakdong Jeongmaek.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.252-264
• /
• 2023

This paper proposes a design of a dual-band band-pass filter that integrates a λg/2 open SIR structure, a transmission line, and a fork-type structure with symmetric and asymmetric open stubs. To obtain the dual-band effect, the proposed filter uses the SIR structure and adjusts the impedance ratio of the SIR structure. Therefore, the position of the harmonics of the filter is shifted through the adjustment of the impedance ratio, and this can obtain a double-band effect. In order to obtain the dual-band characteristics, the dual-band effect is obtained by inserting a open stub between the SIR structures with the SIR structure divided in half. In addition, the second frequency response is obtained by adjusting the length of the open symmetrical stub in the fork-shaped structure. The asymmetrical open stub in the fork form achieves optimum bandwidth by adjusting the length. Therefore, the first center frequency of the proposed band-pass filter is 5.896 GHz and the bandwidth is 13.6 %. At this time, the measurement results are 0.13 dB and 33.6 dB. The second center frequency is 5.906 GHz and the bandwidth is 13.6 %. At this time, the measurement results are 0.15 dB and 19.8 dB. The reason is that when the impedance ratio (Δ) is higher than 1, the position of the harmonic is shifted to a lower frequency band. However, if the impedance ratio (Δ) is lowered by one step, the position of harmonics will move to a higher frequency band. The function of the filter designed using these characteristics can be obtained from the measurement result. The proposed band-pass filter has no coupling loss and no via energy concentration loss because there is no coupling structure of input/output and no via hole. Therefore, system integration is possible due to its excellent performance, and it is expected that dedicated short-range communication (DSRC) system applications used in traffic communication systems will be possible.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.6
• /
• pp.71-82
• /
• 2006

One of the most popular pre-reinforcement methods of tunnel heading in cohesionless soils would be the fore-polling of grouted pipes, known as RPUM (reinforced protective umbrella method) or UAM (umbrella arch method). This technique allows safe excavation even in poor ground conditions by creating longitudinal arch parallel to the tunnel axis as the tunnel advances. Some previous studies on the reinforcing effects have been performed using numerical methods and/or laboratory-based small scale model tests. The complexity of boundary conditions imposes difficulties in representing the tunnelling procedure in laboratory tests and theoretical approaches. Full-scale study to identify reinforcing effects of the tunnel heading has rarely been carried out so far. In this study, a large scale model testing for a tunnel in granular soils was performed. Reinforcing patterns considered are four cases, Non-Reinforced, Crown-Reinforced, Crown & Face-Reinforced, and Face-Reinforced. The behavior of ground and pipes as reinforcing member were fully measured as the surcharge pressure applied. The influences of reinforcing pattern, pipe length, and face reinforcement were investigated in terms of stress and displacement. It is revealed that only the Face-Reinforced has decreased sufficiently both vertical settlement in tunnel heading and horizontal displacement on the face. Vertical stresses along the tunnel axis were concentrated in tunnel heading from the test results, so the heading should be reinforced before tunnel advancing. Most of maximum axial forces and bending moments for Crown-reinforced were measured at 0.75D from the face. Also it should be recommended that the minimum length of the pipe is more than l.0D for crown reinforcement.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.7
• /
• pp.117-133
• /
• 2010

A hybrid system of soil-nailing and compression anchor is proposed in this paper; the system is composed of an anchor bar (installed at the tip) with two PC strands and a steel bar. After drilling a hole, installing proposed hybrid systems, and filling the hole with grouting material, prestress is applied to the anchor bar to restrict the deformation at the head and/or to prevent shallow slope failures. However, since the elongation rate of PC strand is much larger than that of steel bar, yield at the steel bar will occur much earlier than at the PC strand. It means that the yield load of the hybrid system will be overestimated if we simply add yield loads of the two - anchor bar and PC strands. It might be needed to try to match the yielding time of the two materials by applying the prestress to the anchor bar. It means that the main purpose of applying prestress to the anchor bar should be two-fold: to restrict the deformation at the nail head; and more importantly, to maximize the design load of the hybrid system by utilizing load transfer mechanism that transfers the prestress applied at the tip to the head through anchor bar. In order to study the load transfer mechanism in a systematic way, in-situ pullout tests were performed with the following conditions: soil-nailing only; hybrid system with the variation of prestress stresses from 0 kN to 196 kN. It was found that the prestress applied to the anchor system will induce the compressive stress to the steel bar; it will result in decrease in the slope of load-displacement curve of the steel bar. Then, the elongation at which the steel bar will reach yield stress might become similar to that of PC strands. By taking advantage of prestress to match elongations at yield, the pullout design load of the hybrid system can be increased up to twice that of the soil-nailing system.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.171-187
• /
• 2022

Recently, the demand and development for non-face-to-face services are rapidly progressing due to the pandemic caused by the COVID-19, and attention is focused on the metaverse at the center. Entering the era of the 4th industrial revolution, Metaverse, which means a world beyond virtual and reality, combines various sensing technologies and 3D reconstruction technologies to provide various information and services to users easily and quickly. In particular, due to the miniaturization and economic increase of convergence sensors such as unmanned aerial vehicle(UAV) capable of high-resolution imaging and high-precision LiDAR(Light Detection and Ranging) sensors, research on digital-Twin is actively underway to create and simulate real-life twins. In addition, Game engines in the field of computer graphics are developing into metaverse engines by expanding strong 3D graphics reconstuction and simulation based on dynamic operations. This study constructed a mirror-world type metaverse that reflects real-world coordinate-based reality using Unreal Engine 5, a recently announced metaverse engine, with accurate 3D spatial information data of convergence sensors based on unmanned aerial system(UAS) and LiDAR. and then, spatial information contents and simulations for users were produced based on various public data to verify the accuracy of reconstruction, and through this, it was possible to confirm the construction of a more realistic and highly utilizable metaverse. In addition, when constructing a metaverse that users can intuitively and easily access through the unreal engine, various contents utilization and effectiveness could be confirmed through coordinate-based 3D spatial information with high reproducibility.

• Land and Housing Review
• /
• v.14 no.2
• /
• pp.19-34
• /
• 2023

The proportion of single-person households has been steadily increasing, and the young account for the highest proportion at 35.9% among all single-person households. However, research on young single-person households has been relatively recent. Research on single-person households has mostly focused on all single-person households or elderly single-person households, and comparative research between different age groups is lacking. Therefore, this study categorizes all single-person households into young, middle-aged, and elderly groups to investigate the differences in the factors that affect their residential satisfaction and to analyze how these residential environment factors affect life satisfaction through the mediating effect of residential satisfaction. The 2020 Seoul Survey Urban Policy Index Survey data were analyzed using a structural equation model to investigate the impact of each factor. First, a finding is that various residential environment factors directly affect residential satisfaction and life satisfaction. Next, it was found that residential satisfaction directly affects life satisfaction in the models of young and middle-aged single-person households. Through this, it was confirmed that there are differences in residential environment factors that affect residential satisfaction and that residential satisfaction plays an important mediating role. Finally, it was found that the factors that affect the residential and life satisfaction of young single-person households are more diverse compared to other age groups. This study provides policy implications that age group differences should be considered first in order to improve the residential and life satisfaction of single-person households. In particular, for young single-person households, it is necessary to consider more diverse alternatives to improve their residential and life satisfaction.

• Journal of Popular Narrative
• /
• v.25 no.2
• /
• pp.247-275
• /
• 2019

We hope that more diverse interests will arise in the novels by Park Gye-hyeong By looking at writers and works in time, we identified the key element of Park Gye-hyeong's novels as 'romantic'. Romantic nature of this time is lyrical, sentimental, spiritual, unrealistic and idealistic. Based on a romantic understanding of the world, the core sanction of the novel is love, focusing on feelings of sadness, and on the aspects of joy, separation, and pain that arise from loving relationships rather than the aspects of joy. Based on the feelings of grief, the novels end with failure, death and betrayal, thus embodying tragic romanticism. Before her marriage, Park Gye-hyeong's novels were love stories that revealed her longing for beautiful love based on sensibility. The idyllic world and longing for nature reveal a romantic world-view. Ultimately, it is a fictional worldview that the author seeks to despair and long for, and to find the sincerity and morality of love in an environment that does not. Park Gye-hyeong, who became a housewife, expressed that she wanted to write a piece that can give readers a sense of nostalgia by embodying "romance at a high level," not "sentimental." In subsequent works, physical relationships are treated as failures of love and spiritual relationships as the fruit of love, revealing the lofty spirituality, idealistic longing and religious nature of love. Park Gye-hyeong confessed her shame about her previous work when she published a new one after more than two decades of writing. And after more than two decades of reflection, her new novel had a new theme of "recovering destroyed humanity." However, the search for "humanity" in the two novels released after the write-off tends to be somewhat hasty at the end of the novel. The question of human nature, sin and forgiveness, is the next best thing to save as a way of life, rather than as a result of the intense inner agony and behavior of the characters within the narrative, and this also shows a sudden shift in religiousness at the end of the novel. Therefore, the romantic meaning of the superficial is superficial.