• Journal of Korean Society of Forest Science
• /
• v.104 no.1
• /
• pp.43-49
• /
• 2015

The production of high quality seedlings is a very important phase in silvicultural systems for successful reforestation or restoration. The purpose of this study was to quantitatively measure both growth performances and nutrient responses of Fraxinus rhynchophylla, Pinus densiflora, and Pinus koraiensis seedlings, which are commercially planted in Korea, according to the different types of soil improvement treatments. We applied soil brought (hereafter 'brought'), subsoil inversion (hereafter 'subsoil'), and mixture of brought soil with soil on nursery bed (hereafter 'mixing') in a permanent national nursery. Silt and clay contents were the highest at the subsoil treatment and organic material, soil nitrogen and phosphorus concentrations were the lowest at the brought treatment. The growth of F. rhynchophylla was the lowest at the subsoil treatment, but there were no significant differences among treatments. There were significant differences in only root nutrient concentrations of F. rhynchophylla among treatments: nitrogen, phosphorus, and potassium concentrations were the lowest at the subsoil or brought treatment. Mixing treatment increased N contents with deduction of N concentrations ('dilution') because of more dry weight increase compared with the amount of N uptake. This study suggested mix of brought soil with soil on a nursery bed in a permanently used nursery can economically be an effective technique to improve soil quality.

• The Korean Publising Journal, Monthly
• /
• s.152
• /
• pp.6-7
• /
• 1994

컴퓨터도서 출판은 많은 문제점을 안고 있다. 저작권계약이 없는 외국 소프트웨어의 무단전재, 중복출판, 부적절한 번역출판에 따른 오류, 관련도서들의 발췌를 통한 짜집기 출판이 그런 예이다. 아래아 한글을 다룬 책이 43종이나 중복출판되고 있는 등 형식과 내용에 있어서 별 차이가 없는 출판양태 때문에 좋은 컴퓨터도서를 고르기란 쉽지 않은 일이다.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.7
• /
• pp.643-649
• /
• 2014

In order to demonstrate the possibility of applying an ionic polymer metal composite (IPMC) to a finger exoskeleton, pinching motion analysis was performed for a thumb-index finger dummy actuated by IPMC actuators. The IPMC actuators of 5mm in width and 40mm in length with 2.4mm thickness generated 1.52N of blocking force for the applying voltage of 4.0V. Three actuators were installed on the three rotary joint of an index finger, and one actuator was installed on one proximal joint. Positions of each joint and finger tip were recorded on the video camera, and motion was analyzed. Power supply to the index finger actuators preceded power supply to the thumb actuator, and key pinching motion was accomplished in 180s. Tip pinching was accomplished in 135s as power supply to the thumb preceded power supply to the index finger.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.6
• /
• pp.657-682
• /
• 2011

This paper presents the dynamic analysis on the joint torque of a finger for the tip pinch task. The dynamic model on finger movement was developed in order to predict the joint torques of an index finger, and the finger was assumed as a three-link planar manipulator. Analysis of the model revealed that the joint stiffness was one of the most important parameters affecting the joint torque. The stiffness of the finger joint was experimentally measured, and it was used in analyzing the finger joint torque required for performing the tip pinch task. The obtained joint torque for the tip pinch task will be used as the design requirements of the finger exoskeletal orthosis actuated by the polymer actuator whose allowable torque limit is relatively low compared to that of a mechanical actuator.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.04a
• /
• pp.480-482
• /
• 2000

XML은 기존 HTML의 한계를 극복할 수 있는 새로운 기술로 다양한 응용분야에 활용되고 있으며 많은 응용 제품들이 개발되고 있다. XML편집기, XSL편집기, XML브라우져, XML저장 관리기, XML문서 저장 관리기, XML문서 검색기, XML Conversion Tool등의 다양한 XML응용 프로그램에서 사용할 수 있는 표준 라이브러리 API인 DOM(Document Object Model)과 SAX(Simple API for XML)를 지원하며 XML문서의 모든 구성요소에 대한 처리를 할 수 있는 파서가 요구되고 있다. 이에 본 논문에서는 다양한 응용 프로그램의 요구사항을 분석하고 이를 반영하여 처리할 수 있는 XML Toolkit모델을 제시한다. 본 XML Toolkit은 W3C XML 1.0스펙과 W3C Namespaces in XML스펙과 W3C DOM Level 1스펙을 지원하며 XML사용자 그룹에서 정의한 SAX를 지원한다. 또한 표준 API로 접근할 수 없거나 그 기능이 표준에서 정의되지 않은 추가 기능을 제공하기 위한 XML문서의 내부자료구조를 정의하고 이의 처리를 위한 API를 제공한다.

• Anxiety and mood
• /
• v.6 no.1
• /
• pp.24-30
• /
• 2010

Objectives : Tic disorder is known to be a chronic neuro-behavioral disease, cognitive behavioral treatment (CBT) strategies, like habit reversal training (HRT), are introducing recently. We report the effectiveness of HRT in Tourette disorder, which are very common in clinical settings. Methods : The DSM-IV clinical diagnosis applied by child psychiatrist. YGTSS, Kovac's children's depression inventory, Spielberger State-Trait Anxiety Inventory, Abbreviated Conners' Rating Scales, Dupaul ADHD Rating Scales are used. Ultimately, totally 10 children were evaluated. Subject group are consist of 6 boys and 4 girls, and the mean age was $10.90{\pm}1.73$ years old. This study is treatment-refractory 10 patients (from 9-14 years old) though 1 years drug treatment and psychiatric consultation were taken. We administered 5 times of HRT for 4 weeks. Results and Conclusion : There were improvement of scores in Yale Global Tic Severity Scale, Clinical Global Improvement. Our observations indicate that HRT might be effective in the treatment of Tourette disorder.

• Journal of Food Hygiene and Safety
• /
• v.29 no.3
• /
• pp.189-194
• /
• 2014

This study was conducted to evaluate microorganism contamination of food utensils and service facilities in school and to prevent hazards by food poisoning occurrence. As a result, the highest number of microorganism growth plate ($12.3{\pm}2.6$) was detected in total bacteria test plate, and also observed $10.3{\pm}3.9$ growth plates in Staphylococcus aureus test plate and $9.5{\pm}3.9$ growth plates in E. coli and coliform bacteria test plate. But we could detect to the lowest number of growth plates ($1.5{\pm}1.0$) in Vibrio test plate. We also assessed that floors were appeared to the highest microorganism contamination rate in food utensils and service facilities. Therefore, $4.5{\pm}0.6$ growth plates was detected in pre-operation floor and $4.3{\pm}1.0$ growth plates in floor. And high level of microorganism contamination also observed in tables as $3.3{\pm}1.0$ growth plates in cooking table and $3.0{\pm}0.0$ growth plates in dining table. The level of microorganism contamination of food utensils such as kitchen knife, cutting board, and food tray were lower than that in food service facilities. We analysed microorganism contamination according to purpose of use in kitchen knifes and cutting boards. The microorganism contamination rate in fish kitchen knife ($2.0{\pm}0.8$) and fish cutting board ($1.3{\pm}1.5$) were slightly higher than that of others purpose of use. As a result of microorganism identification, various strains of microorganism were contaminated in food service facilities and some strains could detected more than two times. Especially, Staphylococcus aureus was repeatedly identified in cooking table, trench, and kitchen knife. Bacillus cereus was identified in kitchen knife, and then Pseudomonas fluorescens and Pseudomonas aeruginosa were also detected in food utensils and service facilities as known to food spoilage microorganisms. Klebsiella pneumoniae was detected four times repeat, which widely distribute natural environment as normal bacterial flora but sometimes cause acute pneumonia. These results suggest that food utensils and service facilities are contaminated with not only major food poisoning microorganisms such as Staphylococcus aureus, but also food spoilage microorganisms. Taken together, strict personal hygiene control and efficient food service facilities management will be needed to enhance food safety in school feeding and to improve student health.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1153-1163
• /
• 2015

The purpose of this study is to investigate the effects of task-oriented activities on hand functions in patients with hand injuries. From December 2011 to October 2012, sixteen patients with hand injuries at C Hospital in Changwon, Gyeongsangnam-do, Korea were randomly divided into two groups. One group was subjected to task-oriented activity and the other to general exercise. Two groups performed each activity once a day, three times a week, for four weeks. The group with the task-oriented activities was provided with the tasks according to subject-preference based on the result of Canadian Occupational Performance Measure (COPM). To verify the effect of intervention, the following hand function measures were used: grip strength, pinch strength, and the range of opposition and abduction, Purdue pegboard test and Disabilities of the Arm, Shoulder and Hand (DASH). Both groups showed significant increase in all of the hand function measures after 4-week activities(p<.05). The task-oriented activity group was significantly different from the control group in powers for tip pinch, lateral pinch and three-jaw chuck pinch, Purdue pegboard test and DASH(p<.05) except in grip strength and the range of opposition and abduction suggesting better improvement in hand functions. This study shows that task-oriented activities improve the hand functions more effectively in patients with hand injuries.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1305-1306
• /
• 2012

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.641-643
• /
• 2003

HTML 컨텐츠와 관련 어플리케이션을 효과적으로 무선 인터넷 사용자들에게 전달하기 위해서는 HTML 문서를 WML 기반의 문서로 효율적으로 변환하고 저작하여 양질의 컨텐츠를 제공하는 제반기술 및 연구에 대한 필요성이 커지고 있다. 본 논문에서는 HTML을 사용하여 제작된 기존 웹 페이지를 실시간으로 처리하여 WAP 환경에 적합한 언어인 WML 문서로 변환해주는 WML 변환기와 WML 문서를 WYSIWYG방식으로 생성하고 관리할 수 있는 WML 편집기를 설계하고 구현함으로써 무선 환경에 적합한 서비스의 제공이 가능하도록 하였다.