• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.65-70
• /
• 1992

오래전부터 회전체 질량의 불균형에 의한 진동을 줄이기 위한 전용 밸런싱 장치와 프로그램이 개발되었다[1-5]. 그런데 밸런싱 장치는 센서로부터 측정 된 진동 신호를 이용하여 밸런싱을 함으로 밸런싱의 반복성과 정밀도 등에 따라 그 장치의 성능을 평가할 수 있으며, 국제 표준기구(ISO)에서도 장치의 성능을 평가하기 위한 각종 시험 규격들을 제시, 권장하고 있다[6]. 본 연구 에서는 강성 회전체의 밸런싱을 위해 연구실에서 제작한 탄성 베어링 밸런 싱 장치에 대해 ISO 규격에서 제시하는 성능 평가 시험들을 기초로 회전체 밸런싱과 여러가지 시험을 수행하고 장치의 특징과 성능을 알아보고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.470-473
• /
• 1995

There exist two critical in application of the magnetic bearing system. One is the control axis interference caused by gyroscopic effect and the other is the vibration caused by the unbalance on the rotor. To solve both problems at the same time, first, a centralized full-state feedback controller based on the LQR control theory was designed to compensate for the gyroscopic effect. Second, disturbance rejection control input based on the observer was designed to avoid the vibration causer by the unbalanced rotor. Balancing input computer accroding to LQR and output of the observer were derived in term of rotational speed. Effectiveness of the on-line balancing was verified through numerical simulation. The developed observer-based controller was also applied to the linear and nonlinear magnetic bearing systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.867-870
• /
• 2002

In high-speed optical disk drive, the excitation caused by rotation of a mass-unbalanced disk is a major source of vibration. The vibration can be a disturbance to the servo system, which is sufficient to cause severe failures in the reading and writing process. The vibration also causes users to feel unpleasantness. The vibration reduction is therefore essential for the reliable operation of optical disk drive. One of the approaches to reduce the vibration is a dynamic vibration absorber (DVA). In this paper, we analyze the dynamic behavior of $DVD\pmRW$ combo drive system with DVA through 12_dof rigid multi-body dynamic model. The effective location and the optimal frequency ratio are obtained from the analysis.

• Journal of the Korean Society for Railway
• /
• v.4 no.1
• /
• pp.23-30
• /
• 2001

The dynamic characteristics such as natural frequency, mode shape and damping ratio are most important parameters in the high-speed railway bridges rather than general roadway bridges. Also, the need to know the dynamic behavior of bridges greatly increased in recent years. In the early of 1990s, to design the high-speed railway bridges, damping ratio recommended in general code was 2.5～7.5%. However, these values were not applied in all cases. Therefore, obtaining the damping value of specific structures is important to get the correct variable for design of high-speed railway bridges. The purpose of this study is mainly to obtain the damping ratio of high-speed railway bridges. The average damping ratio of high-speed railway bridges evaluated from a field test is about 2.4%.

• Journal of the KSME
• /
• v.33 no.10
• /
• pp.884-891
• /
• 1993

최근 승용차의 설계는 일반적으로 고속화, 경량화 추세에 있다. 이에 따라 심각하게 대두되고 있는 것이 진동문제로서, 그중에서도 조향계(steering system)의 진동은 보다 쾌적한 승차감 내지 조정성능을 저해하고 운전자에게 불쾌감을 초래하는 진동으로서 이에 대한 개선책이 요구되어 왔다. 따라서 이러한 조향계의 진동인 쉬미(shimmy)현상을 저감시키기 위해서는 다음과 같은 방법등이 있다. 1) 가진원이 되는 타이어의 불균형 질량을 줄이거나 타이어의 정밀도를 증가시키는 방법. 2) 진동전달 경고상의 감쇠특성과 조향계의 강성을 변화시켜 전달률을 줄이는 방법. 3) 차체의 동특성 변화를 통하여 고유진동수를 변화시켜 공진영역을 옮기는 방법. 이 글에서는 쉬미에 큰 영향을 줄 것으로 생각되어지는 여러 중요한 인자들을 단계적으로 포함 시켜가면서 이론해석 결과와 실험결과를 비교 . 검토 . 보완해갈 것이며, 그 결과 이론적으로 쉬미현상을 예측할 수 있는 방안을 제시하고자 한다.

• Journal of Aerospace System Engineering
• /
• v.13 no.2
• /
• pp.26-33
• /
• 2019

Control moment gyro (CMG) employed as satellite actuators, generates a large torque through the steering of its gimbals. Although each gimbal holds a high-speed rotating wheel, the wheel imbalances induces disturbance and degrades the satellite control quality. Therefore, the disturbances ought to be detected and identified as a precaution against actuator faults. Among the method used in detecting disturbances is the state observers. In this paper, we apply a continuous second order sliding mode observer to detect single disturbances/faults in CMGs. Verification of the algorithm is also done on the hardware satellite simulator where four CMGs are installed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.45-53
• /
• 2015

Large-capacity of household washing machine can become unbalanced during the dehydration process. To solve this problem, several types of suspensions have been installed in a washing machine. In this study, physical tests were carried out on a frictional suspension, and the nonlinear characteristics were modeled by combining several simple physical models. The parameters were estimated based on the least squares solution. The simulation and test results were compared to verify the validity of the friction damper model.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.4
• /
• pp.508-519
• /
• 2018

This paper concerns on stabilization control of a gyro-stabilized 2-axes gimbal system which is mounted on a moving vehicles such as automobiles, armored vehicles, ships, flying vehicles, etc. A target image acquisition system is attached on the inner gimbal, and the gimbal systems are required to retain high stabilization accuracy in the absolute coordinate in order to provide fine target image while vehicle is moving. The stabilization control performance is hardly depended upon disturbance rejection ability of control, and disturbance feedforward compensation is effective because feedforward compensation reduce the amount of disturbance before the disturbance disturbs the systems. This paper suggests an experimental method which can estimate system parameters and disturbance torques by using 3-axes accelerometer mounted on the inner gimbal. Furthermore, a simple disturbance identification method which can be applied to any slanted base conditions has been suggested to identify mass unbalance vector and friction torques of each gimbal simultaneously. By using the estimated parameters, a feedforward compensation has been applied to the gyro-stabilized 2-axes gimbal system. The experimental results showed that the feedforward compensation based on the identification method suggested is effective to improve stabilization performances.

• Journal of KSNVE
• /
• v.7 no.2
• /
• pp.209-214
• /
• 1997

Vibration characteristics which are typical in a cracked rotor can be utilized for detection of crack. The changing trend of harmonics at the second harmonic resonant speed according to the crack depth and the unbalance orientation has been discussed. To characterize the vibration depending on crack orientation, the unbalance and gravitational responses of the cracked rotor are calculated. An algorithm for crack orientation identification is also introduced. A trial mass is attached step by step with even angle interval along a certain circumference, and then the synchronous and second horizontal harmonic compenents of vibration are measured and curve-fitted using least square method. Numerical simulations using this method show good results.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1993.05a
• /
• pp.71-71
• /
• 1993

Diplophonia is produced by the voice of two separate tones and produced through quasi-periodic variations in the vocal cord vibration. Diplophonia is generally regarded as a symptom of laryngeal pathology. The difference in the vibratory frequency between the vocal cords can be seen in a tension imbalance and a difference in the level of the vocal folds under the special condition such as incomplete glottal closure. So authors have experienced 19 cases of patient with diplophonia for the unilateral vocal cord paralysis, intracordal cysts and other mass lesions. And we analysed the diplophonic voice with peak variability and noise level for the quasi-periodic waveforms and spectrograms pre-and postoperatively.