• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4
• /
• pp.82-87
• /
• 1998

여러 음원들에 의해 형성된 파동장내에서 각 신호음의 주파수 특성과 시간 지연 (time delay)을 추정할 수 있는 알고리즘을 개발하였다. 이 알고리즘의 관련 수식은 두 개의 상호 간섭하는 신호가 입사하고 여기에 주변 환경에 의한 랜덤 잡음이 첨가된다고 가정하여 유도되었으며 두 개 이상의 신호음이 있는 상황에 대해 확장이 가능하다. 본 논문에서 시간 지연이 일정한 수신 신호 영역에 등간격으로 놓여진 수신기로부터 각 센서에 수신된 신호의 스펙트럼은 M개의 센서에 대해 K개의 음원 스펙트럼과 K개의 조정 벡터(steering vector) 의 선형 조합(linear combination)으로 주파수에서 모델된다. 각 음원의 주파수 특성과 음원 으로 들어오는 신호의 입사각을 결정하기 위하여 본 알고리즘은 전달 행렬(transfer matrix) 을 계산하고 그 전달 행렬의 고유값(eigenvalue)과 고유벡터(eigenvector)를 분석한다. 이 고 유값들은 복소수이며 그 크기는 진폭 변환 계수를 결정한다. 위상은 수신기의 간격으로부터 시간 지연을 결정하는 기울기를 갖는 주파수의 선형 함수이다. 전달 행렬에의 입력 자료들 은 동일 간격 소자간의 cross-power spectra이다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.612-615
• /
• 2006

본 논문에서는 Late 암으로부터 측정된 상관 값을 보정하여 상관함수의 비대칭을 완화시키고 다중경로 신호 오차를 제거하는 새로운 상관기 설계법을 제안하였다. 다중경로 오차에 의한 신호 추적 오차는 상관함수의 Early-Late 간 비대칭과 관련이 있으므로, 다중상관기 구조를 이용하여 상관함수의 Early-Late간 상관값 차를 측정하면 상관함수의 비대칭 정도를 추정할 수 있다. 상관값 차를 이용하여 추정한 상관함수 비대칭을 감소시키면 다중경로 신호에 의한 코드 추적 오차를 줄일 수 있다. 제안한 상관기는 4개의 암과 보정치 생성 블록으로 구성된다. 제안한 상관기의 다중경로 오차 제거 성능은 시뮬레이션을 이용하여 확인하였다. 여러 가지 지연시간 및 신호 진폭을 가지는 다중경로 신호에 대하여 일반 수신기와의 위상 추적 오차를 비교하여 성능을 평가하였다. 시뮬레이션 결과에서 제안한 상관기는 우수한 다중경로 오차 제거 성능을 가지며 일반상관기와 유사한 평균 신호 획득시간을 가짐을 알 수 있다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.1
• /
• pp.75-82
• /
• 2007

As one of the main support systems, rock bolts play a crucial role in the reinforcement of tunnels. Numerical and experimental studies using a transmission method of ultrasonic guided waves are performed to evaluate the integrity of rock bolts encapsulated by grouting paste. Numerical simulations using "DISPERSE" are carried out for the selection of the optimal experimental setup, i.e. non-destructive testing (NDT) system of the rock bolt. Based on results of the numerical simulation, the calculated frequency range for NDT testing is between 20kHz and 70kHz with the first longitudinal L(1) mode. Laboratory transmission tests are performed by attaching the piezo electric sensor at the tip of the rock bolt before embedding. Both of analytical and experimental results show that the amplitude of signals as well as the wave velocity increases with increase in the defect ratio of grouting paste. The defect in grouting paste means that the space around the rock bolt is not fully filled with the grouting paste. Experimental results also show that the increase of the wave velocity is more sensitive to the defect ratio increase than that of the amplitude. This study demonstrates that the transmission technique of ultrasonic guided waves may be a valuable tool in the evaluation of the rock bolt integrity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.131-140
• /
• 1998

MAI(Multi-Access Interference) and fast channel variation due to the fading environment are the major problems in the mobile CDMA communication systems. Recently, interest has been increasing in applying the Adaptive Linear MMSE Detector to MAI cancellation in the CDMA reverse link. In this paper, we propose a modified Adaptive Linear MMSE Detector structure which can be used in Long-duration code CDMA system in the presence of independent Rayleigh fading. We use independent multiple tap-weight vector structure to cope with the variation of spreading sequence pattern between neighbor symbols because of the Long-duration code. In this case, more exact channel parameter estimation is required. To solve this problem, we use coherent CDMA structure which can track the channel parameters like amplitude and phase by employing the low power pilot channel in the CDMA reverse link.

• Journal of the Korean Society for Railway
• /
• v.17 no.6
• /
• pp.397-401
• /
• 2014

In order to rationally design a new conceptual submerged floating railway, prediction of wave forces applied to the structure is very important. In this paper, equations to calculate such forces based on hydrodynamic theories were proposed and model tests were carried out. Inertia forces and drag forces, calculated using Morison's equation and the linear small amplitude wave theory, were in good agreement with the results from model tests conducted in a wave making tank. Drag forces were negligible compared with inertia forces. Also, wave forces showed linear variation with the changing wave heights. It was revealed that the linear wave theory and Morison's equation can give a simple and useful solution for the prediction of wave forces in the initial design stage of a submerged floating railway.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.3
• /
• pp.267-275
• /
• 2012

In this study, crack growth in a center-cracked plate is predicted under mode I variable amplitude loading, and the result is validated by experiment. Huang's model is employed to describe crack growth with acceleration and retardation due to the variable loading effect. Experiment is conducted with Al6016-T6 plate, in which the load is applied, and crack length is measured periodically. Particle Filter algorithm, which is based on the Bayesian approach, is used to estimate model parameters from the experimental data, and predict the crack growth of the future in the probabilistic way. The prediction is validated by the run-to-failure results, from which it is observed that the method predicts well the unique behavior of crack retardation and the more data are used, the closer prediction we get to the actual run-to-failure data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.317-322
• /
• 2003

This paper have calculated a relative heights of an each station using the data which were observed by GPS permanent stations(Chejudo, Homigoj, Jumunjin, Marado, Palmido, Ulengdo, Youndo) established in Korea. We performed spectrum analysis with a calculated relative heights by CLEAN algorithm. Through these process, we estimated vertical displacement of earth surface by semi-dinural ocean tidal loading components, and compared them with the results which were calculated by improving ocean tide model(NA099jb) for adjacent seas around Japan and Korea. As the result of this study, we determined the ocean tidal loading components with loading effects of $M_2$ and $N_2$, and we noted that the amplitude and the phase lags of ocean tidal loading components from observed GPS data were almost equal to values calculated from ocean tide models. However, the loading components about semi-diurnal tide $S_2$, $K_2$ couldn't estimate because of periods. Also, the diurnal ocean tide loading components were not considered, because the noise level have increased during the diurnal frequency.

• Composites Research
• /
• v.24 no.4
• /
• pp.36-40
• /
• 2011

This paper described analysis of acoustic emission parameter for the damage evaluation of type II vehicle fuel tank during fracture test. The observation of Kaiser effect, Felicity effect and creep effect is the means of damage evaluation method. It is possible to evaluate tank damage by the ratio of hit of over 60 dB and total hit. Damage mechanism of pressure tank can be estimated by analysis of average rise time, average amplitude.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3148-3154
• /
• 2010

This paper presents the probabilistic analysis for fatigue life of Glass/Epoxy laminates with impact-induced damage. For this, a series of impact tests were perfomed on the Glass/Epoxy laminates using instrumented impact testing machine. Then, tensile and fatigue tests carried out so as to generate post-impact residual strength and fatigue life. Two Parameter Weibull distribution was used to fit the residual strength and fatigue life data of Glass/Epoxy composite laminates. The residual strength was affected by impact energy and their variance decreased with increasing of impact energy. The fatigue life of impacted laminates was greatly reduced by impact energy and this trend depended on applied stress amplitude. Additionally, the variation of fatigue life was gradually decreased with the applied stress amplitude.

• 한국해양학회지
• /
• v.20 no.3
• /
• pp.1-5
• /
• 1985

Seasonal variations of heat content in the neighbouring seas of Korea are estimated from the bimonthly normals of seawater temperature in the upper 300m for 15 years (1961~1975) at 192 stations. The heat is seasonally stored mainly in the upper 100m layer in the East Sea and in the whole water column in the West and South Seas of Korea. The annual range of heat content changes in the West Sea is almost the same as that in the East Sea. The annual phase of heat content variation lags behind that of sea surface temperature variation by one to three months. Due to the seasonal advections of heat by currents and winds, the annual amplitude of heat storage rate in the neighbouring seas of Korea is much larger than that of incoming radiation.