• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.8
• /
• pp.1241-1246
• /
• 2013

Currently, The general transportation system arranges the armature on the full length of transportation lines. However, when this method is applied to the long distance transportation system, it causes an increase of material cost and manufacturing time. Thus, in order to resolve this problem, discontinuous arrangement method of the armature has been proposed. However, in the method of using stationary discontinuous armatures, mover can stop in the freewheeling section which is non-installations section when disturbance is generated and the mover can not be moved because armature control is impossible. Thus, the distance determination of armature is very important. Also, when the armature is arranged discontinuously the edge always exists due to the structure. Due to this edge, the cogging force is greatly generated during the entry and ejection of the mover to the armature. This cogging force causes thrust force ripple generating noise, vibration and decline of performance, it must be reduced. Therefore, in this paper, we examined the end edge cogging force generated by the stationary discontinuous armatures through 2-D numerical analysis using finite element method (FEM) and we figured out distance of armature for end edge cogging force minimization.

• Journal of Advanced Navigation Technology
• /
• v.14 no.4
• /
• pp.489-494
• /
• 2010

According to the recent increase in air traffic more efficient air traffic control automation is required. Aeronautical traffic environment is different from the common traffic environment since it exist controller for control of aircraft And controller have to control jurisdiction hand-off by manual when aircraft move to the other sector. This paper proposes the automatic control jurisdiction hand-off algorithm for efficient air traffic flow management. It is sector distinction algorithm that aircraft move sector to the other sector it recognized sector and then give permission to authorized controller. As a simulation result, so unlilke simply manual control sector hand-off of existing algorithm. we confirmed that proposed algorithm in this paper can do air traffic control more efficiently by performing automatic aircraft. control sector hand-off.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.1
• /
• pp.160-166
• /
• 2010

Railroad level crossing systems are used to prevent train from collisions by informing pedestrians and vehicles of approaching trains on the level crossing. The current detection systems mostly use track-based electrical circuits to detect approaching trains. The making and breaking of the circuit when the train wheel passes along the track sends a signal to barriers that restrict access to the track. Unfortunately, this track-based signal system is vulnerable to malfunctions in certain situations. If the rail becomes rusted due to moisture, weather conditions, or infrequent use, the electrical circuit detection system could fail. Such a failure could lead to a train-vehicle or train-pedestrian collision. This paper suggests a replacement of the electrical circuit-based system with an infrared detection system. The research shows that an infrared detection system improves safety by reducing the frequency of detection failure of the alarming circuit to system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.39-48
• /
• 2005

An HMIPv6 provides micro mobility management using MAP for decreasing handover delay and network load in a mobile IP networks. An HMIPv6 uses distance based algorithm for MAP selection when a mobile host enters a new network domain. However, since every mobile hosts select a farthest router as a MAP, a handover delay and packet loss will be increased. A new MAP selection scheme is herein proposed to solve the problems caused by the distance based MAP selection algorithm by using secondary MAP. We executed the performance evaluation by simulation about handover delay and packet loss of an HMIPv6 and our proposed scheme. The simulation results show that the performance of our proposed scheme is better than that of HMIPv6.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.8
• /
• pp.89-96
• /
• 2017

This Paper proposes a vehicle detection system and a license plate recognition system from CCTV images installed on public roads. Since the environment of this system acquires the image in the general road environment, the stable condition applied to the existing vehicle entry / exit system is not given, and the input image is distorted and the resolution is irregular. At the same time, the viewing angle of the input image is more wide, so that the computation load is high and the recognition accuracy of the plate is likely to be lowered. In this paper, we propose an improved method to detect and recognize a license plate without a separate input control devices. The vehicle and license plate were detected based on the HOG feature descriptor, and the characters inside the license plate were recognized using the k-NN algorithm. Experimental environment was set up for the roads more than 45m away from the CCTV, Experiments were carried out on an entry vehicle capable of visually identifying license plate and Experimental results show good results of the proposed method.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.723-733
• /
• 2005

This paper presents a deadlock avoidance method for AGVs in automated container terminals. For a more efficient use of AGV traveling area, we divided the area into small-sized grids not enough to cover a whole AGV. Our deadlock avoidance method controls AGVs by identifying strongly connected components(SCCs) in a graph derived from the paths of AGVs on the grids. Also in this paper we suggest a route selection scheme which selects a route by predicting and comparing travel times of candidate routes by using a regression formula. Simulation experiments have shown that the proposed method can control AGVs for 48 hours without deadlocks and the count of AGV visits per QC is increased by $2\~10$ an hour.

• KIISE Transactions on Computing Practices
• /
• v.22 no.9
• /
• pp.405-418
• /
• 2016

Recently, many researchers have studied the VSL decision method using traffic information in multiple detector zones. However, this method selects incorrect VSL starting points, leading to the selection of the wrong speed control zone and calculation of the wrong VSL, causing traffic congestion. Eventually, the Unstable VSL system causes more congestion on the freeway. This paper proposes an improved VSL algorithm stably operated in multiple detector zones on the Korea highway. The proposed algorithm selects a preliminary VSL start station (VSS) expected to end the congestion using the acceleration of stations. It also determines the VSS at each congestion area. Finally, it calculates the VSL relative to the determined VSS and controls the vehicles that enters the traffic congestion zone. The developed strategy is compared with Real-time Variable Speed Limits for Urban Freeway (RVSL) to test the stability and efficiency of the proposed algorithm. The results show that the proposed algorithm resolves the problems of the existing algorithm, demonstrated by the correct VSS decision and the reduction of total travel time by 1-2 minutes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1011-1019
• /
• 2012

This paper presents a novel hybrid authentication scheme in the next-generation Tactical Mobile Communication Systems(TMCS) with wireless MSAP mesh networks. The existing centralized and distributed authentication methods for security between MSAPs may have their pros and cons. The centralized authentication method induces overhead from frequent MSAP association which leads to long authentication delay. On the other hand, the distributed authentication method requires initial sharing of the authentication information. Therefore, a more efficient authentication scheme is needed to protect the network from malicious MSAPs and also maximize efficiency of the network security. The proposed scheme provides a hybrid method of efficiently managing the authentication keys in the wireless MSAP mesh network to reduce the induced authentication message exchange overhead. Also, as the authentication method between MSAP and TMFT is different, a method of utilizing the ACR for handling the EAP packets is proposed. In overall, the proposed scheme provides efficient mutual authentication between MSAPs especially for tactical environments and is analyzed through performance evaluation to prove its superiority.

• Journal of the Korean Institute of Gas
• /
• v.21 no.6
• /
• pp.61-69
• /
• 2017

In case of plant accident, the most important measures that field operators, control-room operators and fire fighters must take are the escape from and going into the accident sites. These two different actions are reverse directional moving actions. By training operators and fire fighters with counter-accident path taking measurements, we can prevent the small accidents from becoming large-scale accidents, and can take efficient measurements in case of actual plant accidents. Out of necessities of path-taking training, in this research, we developed the escape and rescue path-taking method for plant accident response training. We can calculate the escape and rescue routes from a operator or fire fighter's current location as of accident happening and provide route data which in turn can be used as the safety training scenario. We expect this path-taking method can enhance the effectiveness and reality of escape and rescue training scenarios.

• The KIPS Transactions:PartD
• /
• v.8D no.3
• /
• pp.265-272
• /
• 2001

In case of implementing a complicated application like WAP (Wireless Application Protocol) in a mobile terminal with the characteristics of bare machine and versatile kernel aspects of which are control, interrupt and IPC(Inter Process Communication), a special methodology should be needed. If not, it will cause more cost and human resources, even delayed product into launching for the time-to-market. This paper suggests AKL, (Abstract Kernel Layer) for the design and implementation of WAP on basis of multi-platform. AKL is running on the various kernel including REX, MS-DOS, MS-Window, UNIX and LINUX. For the purpose of it, AKL makes machine-dependant features be minimized and supports a consistent interface on API (Application Program Interface) point of view. Therefore, it makes poring times of a device be shorten and makes easy of maintenance. We validated our suggestion as a consequent of porting WAP into PlamV PDA and mobile phone with AKL.