• 반도체디스플레이기술학회지
• /
• 제8권2호
• /
• pp.11-14
• /
• 2009

The $Sr_{0.7}Bi_{2.3}Nb_2O_9$(SBN) thin films are deposited on Pt-coated electrode(Pt/Ti/$SiO_2$/Si) using RF sputtering method at various $Ar/O_2$ ratio. We investigated the effect of deposition condition(specially $Ar/O_2$ ratio) on the structural properties of SBN thin film. As $Ar/O_2$ ratio was increased, the peaks in the XRD pattern became more sharp. Also, the peaks(008)(115)(220) in 80/20 of $Ar/O_2$ ratio were suddenly appeared. The optimum of the rougness showed about 4.33 nm in 70/30 of $Ar/O_2$ ratio. The crystallinity of SBN thin films were increased with the increase of $Ar/O_2$ ratio. Also, Deposition rate of SBN thin films was about 4.17 nm/min in 70/30 of $Ar/O_2$ ratio. The capacitance of SBN thin films were increased with the increase of $Ar/O_2$ ratio.

• 한국전기전자재료학회논문지
• /
• 제35권5호
• /
• pp.509-515
• /
• 2022

As the 4th industrial revolution based on ICT is progressing in the manufacturing field, interest in building smart factories that can be flexible and customized according to customer demand is increasing. To this end, it is necessary to maximize the efficiency of factory by performing an automated process in real time through a network communication between engineers and equipment to be able to link the established IT system. It is also necessary to collect and store real-time data from heterogeneous facilities and to analyze and visualize a vast amount of data to utilize necessary information. Therefore, in this study, four types of controllers such as PLC, Arduino, Raspberry Pi, and embedded system, which are generally used to build a smart factory that can connect technologies such as artificial intelligence (AI), Internet of Things (IoT), and big data, are configured. This study was conducted for the development of a program that can collect and store data in real time to visualize and manage information. For communication verification by controller, data communication was implemented and verified with the data log in the program, and 3D monitoring was implemented and verified to check the process status such as planned quantity for each controller, actual quantity, production progress, operation rate, and defect rate.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.160-164
• /
• 2022

In this paper, through the development of a smart panel (LCD kiosk) controller, contents to develop a system that can be operate in a desired environment by operating the window control and ventilation facilities according to the automatic controller operation based on the set values such as temperature, humidity, sunlight, and rainfall. In particular, the MQTT protocol-based sensor module can be directly manufactured and applied at any time based on various communication and power sources such as wireless, wired, and PLC (power line communication) to obtain the desired data, as well as fire, power failure, and intrusion in the house. It is also a system that enables operation and monitoring from a remote location based on the cloud environment by connecting sensors. Kiosks are currently being used in many places, and the demand for them is on the rise, and an active influx of young people can be expected through environmental improvement. It is expected to increase interest and understanding for improvement.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.143-148
• /
• 2022

For the purpose of treating health checkups and recovery of patients in a super-aged society, hospitals use devices designed with a reduction circuit of electromagnetic waves associated with the specific absorption rate of electromagnetic waves absorbed by the human body. In this paper, we proposed a filter improvement design method capable of reducing electromagnetic waves. As a result of confirming the validity of the proposed technique through simulation and experimental results, the following result values were obtained. Applying the common-mode (CM) inductor 4 mH to a calibration circuit, noise decreased in a multiband spectrum. Using the differential mode(DM) inductor 40 µH element in the primary calibration circuit, the noise decreased by 15 dB or more in the 3 MHz band spectrum. Also, applying the Admittance Capacitance (Y-Cap) 10 nF element in the secondary calibration circuit resulted in the decrease by more than 30 dB in the band spectrum before 2 MHz. After using a common-mode inductor 4 mH element in the tertiary calibration circuit, it decreased by more than 15 dB in the band spectrum after 2 MHz.

• 한국전기전자재료학회논문지
• /
• 제37권1호
• /
• pp.94-100
• /
• 2024

Recently, as interest in personal hygiene has increased due to the community spread of COVID-19 and variant viruses, fixed and potable UV germicidal equipment to sterilize indoor spaces and hand-held UV germicidal equipment to sterilize household items such as masks and mobile phones are continuously being developed and sold. However, the development and sales of the product are difficult because appropriate testing methods have not yet been established. In this situation, if an uncertified product is distributed in the market, it can cause serious harm to consumers. In this study, we investigate the photobiological risks and safety devices against UV exposure of UV germicidal equipment distributed domestically, and propose appropriate test methods for portable UV germicidal equipment based on the research results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.209-212
• /
• 1995

In this paper, the $(Sr_{0.85}{\cdot}Ca_{0.15})TiO_3$ of paraelectric grain boundary layer (GBL) ceramics were fabricated. The characteristics of electrical conduction and the thermally stimulated current(TSC) were measured respectively. The region I below 200[V/cm] shows the ohmic conduction, the region II between 200[V/cm] and 1000[V/cm] can be explained by the Pool-Frenkel emission theory, and the region III above 2000[V/cm] is dominated by the tunneling effect. As a result, The origins of these peaks are that the ${\alpha}$ peak observed at $-20[^{\circ}C]$ looks like to be ascribed to the ionization excitation from donor level in the grain, and the ${\alpha}^{\prime}$ peak observed at $-20[^{\circ}C]$ appears to show up by detrap of the trapped carrier of border between the oxidation layer and the grain, and the ${\beta}$ peak observed at $80[^{\circ}C]$ seems to be resulted from hopping conduction of existing carrier in the trap site of the border between the oxidation and second phase.

• 산업진흥연구
• /
• 제9권2호
• /
• pp.197-205
• /
• 2024

본 연구는 2012년부터 2022년까지 중국 A주 상장회사 중에서 중오염기업을 표본으로 하여 기업의 ESG 성과가 채무불이행 위험에 미치는 영향을 분석하였다. 연구 결과는 좋은 ESG 성과가 기업의 채무불이행 위험을 효과적으로 감소시키는 것으로 나타났다. 추가 분석에서는 기업의 ESG 성과가 자금조달 제약의 영향을 완화시켜 채무불이행위험을 감소시키는 것을 보여주었다. 본 연구는 ESG 성과의 관점에서 채무불이행 위험의 영향 요인을 탐색하고, 기업의 ESG 성과가 경제적으로 미치는 영향에 대해 연구하여, 기업의 채무불이행 위험 예방에 대한 실증적 자료를 제공하였다.

• 한국지반신소재학회논문집
• /
• 제9권4호
• /
• pp.39-45
• /
• 2010

부직포에 의한 보강이 모래의 역학적 거동에 미치는 영향에 대해 검토하였다. 이 검토를 위해 보강모래와 무보강모래에 대한 일련의 삼축압축시험이 수행되었다. 표준사인 주문진사가 사용되었고, 부직포 보강재가 모래시료 속에 최대 3층 배치되었다. 분석결과 모래속의 부직포 배치는 모래의 전단강도를 크게 증가시켰고, 보강모래는 파괴시의 변형률도 증가하였다. 또한, 보강층수가 증가할수록 보강재에 의한 시료내 전단층의 확산 방지효과의 증가로 보다 연성화하고, 모래시료의 체적팽창 경향은 부직포 배치에 의해 억제됨이 밝혀졌다. 보강층수 증가에 의한 효과는 간극비 감소로 인한 효과와 같다.

• 박물관보존과학
• /
• 제15권
• /
• pp.66-77
• /
• 2014

국립중앙박물관에 소장되어 있는 은조사 구장복은 조선 말기에 고종이 착용하였던 것으로 기록된 구장문이 그려진 대례복의 하나이다. 이 장문은 왕이 나라를 통치함에 있어 필요한 덕목을 상징적으로 표현한 것으로, 적색·황색·청색·녹색, 회색의 안료로 채색되어 있다. XRF 분석 결과, 적색 안료는 진사/주, 황색 안료는 금·황동, 청색 안료는 청색 유기안료와 연백, 녹색 안료는 구리-비소로 구성된 합성안료인 양록, 회식 안료는 은으로 판단되었다. 또한 유사한 시기에 제작된 국립중앙박물관 소장 적의본과 폐슬본의 안료 성분을 비교 검토한 결과, 차이점과 유사점을 확인할 수 있었다. 이러한 분석 결과는 19세기 말 궁중에서 사용된 안료에 대한 기초적인 자료로 활용할 수 있을 것으로 기대된다.

• 대한한방내과학회지
• /
• 제30권2호
• /
• pp.410-421
• /
• 2009

Objective : The aim of this study is to investigate the preventive effect of Injinchunggan-tang (YJCGT) & Injinysaryung-san (YJSRS) on MCD-diet-induced NASH in A/J mice. Methods : A/J mice were divided into 4 groups: Normal group (normal diet without any treatment). Control group (MCD diet only), YJCGT group (MCD diet with YJCGT), and YJSRS group (MCD diet with YJSRS). After 5 weeks, body weight, liver weight, biochemical parameters for liver function test, histological changes, and real-time PCR were assessed. Results : Mice lost body weight with the MCD diet and the YJCGT and YJSRS groups lost less than the control group, though showed no statistical significance. Liver weights were decreased by the MCD diet, but not significantly. In the liver function test, all the values were increased with the MCD diet, though some did not show significance. Alp and ALT levels were significantly less increased by YJCGT compared to the normal (p<0.05). All values were decreased or increased compared to the control by treatment though showed no significance possibly due to insufficient sample numbers. In histological findings of the livers. MCD-diet induced severe fatty change and collagen accumulation in the livers, but this fatty change was reduced in the YJCGT and YJYRS groups and fibrogenesis was inhibited significantly with p<0.05 and p<0.01, respectively. In real-time PCR analysis, YJCGT and YJYRS showed inhibitory effect on liver fibrogenesis by reducing associated gene expressions caused by MCD diet. Conclusion : YJCGT and YJSRS are considered to be possible candidates for the treatment of patients with NASH and/or liver fibrosis.