• Journal of the Semiconductor & Display Technology
• /
• v.5 no.4 s.17
• /
• pp.5-9
• /
• 2006

The SCT thin films are deposited on Pt-coated electrode($Pt/TiN/SiO_2/Si$) using RF sputtering method with Sr/Ca ratio. The maximum grain of thin films is obtained by ratio of Ca at 15 mol%. The dielectric constant was increased with increasing the ratio of Ca, while it was decreased if the ratio of Ca exceeded over 15 mol%. The dielectric constant changes almost linearly in temperature ranges of $-80{\sim}+90$. All SCT thin films used in this study show the phenomena of dielectric relaxation with the increase of frequency, and the relaxation frequency is observed above 200 kHz. The current-voltage characteristics of SCT thin films showed the increasing leakage current as the measuring temperature increases.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.3
• /
• pp.41-45
• /
• 2007

The (SrCa)$TiO_3$(SCT) thin films were deposited on Pt-coated electrode(Pt/TiN/$SiO_2$/Si) using RF sputtering method according to the deposition condition. The crystallinity of SCT thin films were increased with increase of deposition temperature in the temperature range of $100{\sim}500[^{\circ}C]$. The optimum conditions of RF power and Ar/$O_2$ ratio were 140[W] and 80/20, respectively. Deposition rate of SCT thin films was about $18.75[{\AA}/min]$ at the optimum condition. The composition of SCT thin films deposited on Si substrate is close to stoichiometry (1.081 in A/B ratio). The maximum dielectric constant of SCT thin film was obtained by annealing at $600[^{\circ}C]$.

• Journal of Korean Medical classics
• /
• v.23 no.2
• /
• pp.141-155
• /
• 2010

Simpo(心包. Pericardium) was described early in "Hwangjenaegyeong(黃帝內經)". But there has been a lot of criticisms about this organ. Jinsatak(陳士鐸) is one of famous doctors in Cheong(淸) dynasty. He suggested a creative Oriental medical theory and he did a profound research on Simpo(心包). "Oegyeongmieon(外經微言)" is one of his books recording his oriental medical theory in detail so it is the good documentary record for observing his theory of the Simpo(心包). So we looked into his theory of Simpo(心包) in "Oegyeongmieon(外經微言)" and also referred to his other books. You might be able to get a viewpoint of utilizing Simpo(心包) in several ways through reading this paper.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.333-334
• /
• 2008

The SCT thin films were deposited on Pt-coated electrode using RF sputtering method according to the deposition condition. The crystallinity of SCT thin films were increased with increase of deposition temperature in the temperature range of 100~500[$^{\circ}C$]. The optimum conditions of RF power and Ar/$O_2$ ratio were 140[W] and 80/20, respectively. Deposition rate of SCT thin films was about 18.75[$\AA$/min] at the optimum condition. The maximum dielectric constant of SCT thin film was obtained by annealing at $600^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.325-329
• /
• 1998

In this paper, the (Sr$_{1-x}$ Ca$_{x}$)TiO$_3$(SCT) thin films were deposited at various substrate temperature using RF magnetron sputtering method on optimized Pt-coated electrodes (Pt/TiN/SiO$_2$/Si). An influence of substrate temperature and annealing temperature on the structural and dielectric properties are investigated. The substrate temperature changed from 100[$^{\circ}C$] to 500[$^{\circ}C$] and crystalline SCT thin films were deposited abode 400[$^{\circ}C$]. All thin films had (111) preferred orientation, the (100) oriented films were obtained at the substrate temperature above 400[$^{\circ}C$]. The dielectric constant changes almost linearly in the temperature region of -80~+90[$^{\circ}C$], the temperature characteristics of the dielectric loss exhibited a stable value within 0.1, then not affected by substitutional contents. The capacitance characteristics appears a stable value within $\pm$5[%].

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.440-443
• /
• 2000

The (Sr$_{1-x}$ Ca$_{x}$) thin films ale deposited OR Pt-Coated electrode(Pt/TiN/SiO$_2$/Si) using RF sputtering method with substitutional contents of Ca. The maximum grain of thin films is obtained at SCT15 thin film. The dielectric constant was increased with increasing the substitutional contents of Ca, while it was decreased if the substitutional contents of Ca exceeded over 15[mol%]. The temperature properties of the dielectric loss have a stable value within 2% independent of the substitutional contents of Ca.Ca.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.897-900
• /
• 2000

Annealing dependencies of the fatigue properties of SrBi$_2$Ta$_2$$O_{9}$ thin films were observed as function of substrate temperature(400-50$0^{\circ}C$) by the rf magnetron sputtering method. With increasing annealing temperature from $600^{\circ}C$ to 85$0^{\circ}C$, flourite phase was crystalized to $650^{\circ}C$ and Bi-layered perovskite phase was crystalized above $700^{\circ}C$. The fatigue characteristics of SBT thin films deposited on Pt/TiO$_2$/SiO$_2$/Si substrate did not change up to 101o switching cycles.s.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.12
• /
• pp.581-585
• /
• 2006

Macro interfaces between two different bulk materials which affect the stability of insulation system exist inevitably in the complex insulation system using in extra high voltage (EHV) electric devices. In this paper, Interface between epoxy and ethylene propylene diene terpolymer (EPDM) was selected as an interface in electrical insulation system and the AC dielectric strength of the interface was investigated. Air compress system was used to give pressure to the interface. Specimens were prepared in various ways to generate different surface conditions for each type of interface. Increasing interfacial pressure, decreasing surface roughness and spreading oil over surfaces improve the AC interfacial dielectric strength. Especially, the dielectric strength was saturated at certain interfacial pressure.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.12
• /
• pp.576-580
• /
• 2006

The $(Sr_{0.85}Ca_{0.15})TiO_3(SCT)$ thin films were deposited on Pt-coated electrode $(Pt/TiN/SiO_2/Si)$ using RF sputtering method according to the deposition condition. The crystallinity of SCT thin films were increased with increase of deposition temperature in the temperature range of $100{\sim}500[^{\circ}C]$. The optimum conditions of RF power and $Ar/O_2$ ratio were 140[W] and 80/20, respectively. Deposition rate of SCT thin films was about $18.75[{\AA}/min]$ at the optimum condition. The composition of SCT thin films deposited on Si substrate is close to stoichiometry (1.102 in A/B ratio). The maximum dielectric constant of SCT thin film as obtained by annealing at $600^{\circ}C$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.9
• /
• pp.1764-1768
• /
• 2009

As the demand of electric power is increasing rapidly, the need of the compact and light electric power device is also increased. Copper clad aluminum (CCA) is newly proposed electrical conductor, because of its light-weight and low-cost characteristics, to replace the existing conductor made of copper. This paper presents the salt-proof characteristics of the copper clad aluminum (CCA) to certificate long time safe operation of the newly proposed electrical conductor. The two types of the CCA conductor were tested in the neutral salt spray tester. The experimental results of two types of the CCA with salt spray were presented in this paper. The results comprise resistance measured data, micro picture of the selected surface, and component measured data according to the elapsed time. The period of the experiment was 1,000 hours. There was no evidence to show the corrosion of CCA during the whole period of the experiments.