• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.805-809
• /
• 2001

This paper is presented to determine the optimal parameters of squeeze film damper using an enhanced genetic algorithm (EGA). The damper design parameters are the radius, length and radial clearance of the damper. The objective function is minimization of a transmitted load between bearing and foundation at the operating and critical speeds of a flexible rotor. The present algorithm was the synthesis of a genetic algorithm with simplex method for a local concentrate search. This hybrid algorithm is not only faster than the standard genetic algorithm, but also gives a more accurate solution and can find both the global and local optimum solution. The numerical example is presented that illustrated the effectiveness of enhanced genetic algorithm for the optimal design of the squeeze film damper for reducing transmitted load.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.6
• /
• pp.484-489
• /
• 2003

The paper represents stability of a rotor system with the squeeze film damper (SFD) using an electromagnet. The electromagnet is installed in the inner damper of the SFD. The proposed SFD has basically the property of a conventional SFD and variable damping property according to variation of the applied electric current. Therefore, when the applied current Is controlled, the whirling vibration of the rotor system can be effectively reduced in a wide operational speed range. In the present work, the performance of the SFD was experimentally investigated according to changing the magnetic field strength. As the applied current increased, damping ratios increased, while whirling amplitudes greatly reduced.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.739-744
• /
• 2001

In order to investigate the stability of magneto-rheological fluid based squeeze film damper (MR-SFD), its negative stiffness effect, which arises from magnetization of MR-SFD, is identified theoretically and experimentally. The analytical model of MR-SFD includes the magnetic circuit as well as the displacement stiffness associated with the squeeze mode of MRF. Extensive experiments are carried out to measure the magnetic attraction forces generated in the MR-SFD, with the excitation frequency and the eccentricity of the journal varied, which are controlled by an active magnetic bearing. The simulation and experimental results are found to be in good agreement. It is concluded that the negative stiffness effect dominates only in the low frequency region because its effect diminishes in the high frequency region due to the eddy-current loss.

• Applied Chemistry for Engineering
• /
• v.34 no.4
• /
• pp.383-387
• /
• 2023

The quartz crystal microbalance (QCM), commonly used in high vacuum deposition, becomes difficult to use when a thick film is deposited on the quartz, affecting the crystal's inherent vibration. In this study, a non-destructive optical measurement method was developed to measure the film's deposition rate during the in-situ film deposition process. By measuring the scattered laser intensity caused by the dimer in the parylene gas passing through the gas flow path, it was successfully confirmed that the ratio of the dimer in the parylene gas increases as the pyrolysis temperature decreases. Additionally, it was noted that the film's thickness and haze increase as the pyrolysis temperature decreases by confirming the characteristics of the visible parylene films. Through the research results, we aim to utilize the stable in-situ film deposition rate measurement system to control the precise film deposition rate of parylene films.

• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.967-974
• /
• 1997

Distributed piezoeletric sensor and actuator have been designed for efficient vibration control of a cantilevered beam. Both PZT and PVDF have been used in this study, the former as an actuator and the latter as a sensor for the integrated structure. We have optimized the position and the size of the PZT actuator and the electrode shape of the PVDF sensor. Finite element method is used to model the structure and the optimized actuators, we have designed the active electrode width of the PVDF sensor along the span of the beam. Actuator design is based on the criterion of minimizing the system energy in the control modes under a given initial condition. Model control forces for the residual (uncontrolled) modes have been minimized during the sensor design to minimize the observation spill-over. Genetic algorithm and sequential quadratic programming technique have been utilized as an optimization scheme. Discrete LQG control law has been applied to the integrated structure for real time vibration control. Performance of the sensor, the actuator, and the integrated smart structure has been demonstrated by experiments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.246-251
• /
• 1995

유연구조물의 진동제어를 위해 압전필름 작동기를 사용하였고 이와 연계하 여 샘플링 과정을 고려한 DSMC를 구성하였다. 변수변화 및 외란의 경계치 를 알고 있다는 가정하에 시스템을 이산화시킨 후 제어기를 설계하였다. 일 반적으로 연속시간 시스템의 이산화 과정에서 정합조건의 가정이 보장되지 않기 때문에 제어기 설계시 이를 배제하였다. 이산시간 리아푸노프 이론을 근거로 DSMC의 존재성을 도출하였고, 이것에 기초하여 슬라이딩 모드가 발생되도록 불연속제어기를 설계하였다. 이때, 불연속게인을 상수로 하지 않고 RP의 위치에 따라 계속 새롭게 수정함으로써 슬라이딩 영역을 최소화 하였다. 그리고 기존의 DSMC 기법상에서 발생되는 슬라이딩 영역의 문제를 .betha. 등가제어기를 이용하는 이원화 방법으로 극복하였으며, 컴퓨터 시뮬 레이션을 통하여 제안된 기법의 설계 효율성 및 제어기의 강건성을 입증하였다. 향후, 제안된 기법에 대한 실험적 고찰 및 중요 제어인자에 대한 연구가 계속적으로 수행될 예정이다.

• The monthly packaging world
• /
• s.282
• /
• pp.93-101
• /
• 2016

딸기 포장재용으로 새로이 개발된 공중부양형 구조의 용기를 가지고 딸기가 유통 중 발생할 수 있는 짓물림 방지효과가 있는지를 분석하기 위해 일본 후쿠오카 현 쯔꾸시 시에서 도쿄까지 트럭과 항공기에 의한 수송시험을 했다. 일반적으로 사용되는 EPS용기는 수송 중 딸기 간 포장면적이 많아 흠집 발생면적이 컸으며, PET 트레이 위에 딸기를 배열시키는 '보통들이형 용기'는 과일끼리의 접촉부분에서 짓물림 현상이 많이 발생했다. 개발된 '공중부양형 용기'는 과일끼리의 접촉 없이, 유연한 PE필름으로 포장돼 수송 중 발생하는 딸기의 흠집 발생이 가장 적었다. 또한 'EPS 용기' 및 'PET용기'에 25Hz의 정상 진동을 가한 결과, 용기 내부에 발생하는 진동의 주파수 종류에 차이가 있음을 확인할 수 있었다. 'EPS용기'에서는 가진동의 25Hz보다도 큰 주파수의 진동을 많이 확인할 수 있었다

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.219-222
• /
• 1991

오늘날 점점 “지능적인” 우주구조물과 기계적 시스템의 빠를 발견으로 인하여 자체 진단과 제어 능력을 가진 발전된 구조가 중요해지고 있다. 일반적으로 이들 구조물이 자연 상태에서 유연하게 분포되어 있으므로 분포된 동적 측정과 효과적인 진동감쇄가 이들의 수행에 필수적이 되고 있다. 이 분야에 대한 이론적 발전은 지난 20년간 꾸준히 이루어져 왔다.(중략)

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.354-363
• /
• 2005

Squeeze film dampers (SFDs) have been commonly used to effectively enhance the dynamic behavior of the rotating shaft supported by rolling element bearings. However, due to the recent trends of high operating speed, high load capacity and light weight in rotating machinery, it is becoming increasingly important to change the dynamic characteristics of rotating machines in operation so that the excessive vibrations, which may occurparticularly when passing through critical speeds or unstable regions, can be avoided. Semi-active type SFDs using magneto-rheological fluid (MR fluid), which responds to an applied magnetic field with a change in rheological behavior, are introduced in order to find its applications to rotating machinery as an effective device attenuating unbalance responses. In this paper, a semi-active SFD using MR fluid is designed, tested, and identified to investigate the capability of changing its dynamic properties such as damping and stiffness.In order to apply the MR-SFD to the vibration attenuation of a rotor, a systematic approach for determining the damper's optimal location is investigated, and also, a control algorithm that could improve the unbalance response characteristics of a flexible rotor is proposed and its control performance is validated with a numerical example.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.7
• /
• pp.508-516
• /
• 2003

The dynamic characteristics of an ell-lubricated, short squeeze film damper (SFD) with a central feeding groove are derived based on a theoretical analysis considering the effect of a groove, and identified experimentally using an Active Magnetic Bearing (AMB) system as an exciter. In order to get the theoretical solution, the fluid film forces of the grooved SFD are analytically derived so that the dynamic coefficients of the SFD can be expressed in terms of its design parameters. For the experimental validation of the analysis, a test rig using an AMB as an exciter is proposed. As an exciter. the AMB represents a mechatronic device to levitate and position the test Journal without any mechanical contact, to generate relative motions of the Journal inside the tested SFD and to measure the generated displacements during experiments with fairly high accuracy. Using this test rig, experiments are extensively conducted with various values of clearance, which Is one of the most important design parameters. in order to investigate its effect on the dynamic characteristics and the performance of the SFD. Damping and Inertia coefficients of the SFD that are experimentally Identified are compared with the analytical results to demonstrate the effectiveness of the applied analysis. It Is also shown that the AMB is an ideal device for tests of SFDs.