• Journal of the Korean Geotechnical Society
• /
• v.15 no.1
• /
• pp.175-183
• /
• 1999

Recently, problems related to vibrations of decomposed granite soils have acquired increasing attention in Korea because those soils cover approximately one third of the country. Both resonant column and cyclic triaxial test were performed to investigate deformation characteristics of unsaturated and cement-mixed decomposed granite soils in Suwon region. The important soil parameters in this respect are the shear moduli, dynamic moduli of elasticity and damping ratios. The dynamic parameters are influenced by variables such as strain amplitude, ratio of loading cycles, and degree of saturations, etc. Test results and data have shown that the optimum degree of saturation to the maximum shear modulus due to a capillary menisci effect was about 17~18 % at low strain amplitude and 10~15 % at intermediate strain amplitude. This paper suggests the range of threshold strain and mean shear modulus of decomposed granite soils in Suwon region. It also proposed the empirical relationship between the dynamic parameters for cement-mixed and non-mixed decomposed granite soils.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.607-612
• /
• 1986

최근 테니스의 저변인구가 크게 증가함에 따라 테니스 라켓의 제작기술도 상당한 수준에 이르렀고 설계제작의 자동화에 의해서 양질의 제품이 시판되고 있다. 그러나 라켓에 볼이 임팩트될때 생기는 진동으로 야기되는 테니스 엘보우 등, 해결해야 할 문제들이 아직도 남아 있다. 이와같이 테니스 라켓의 정적인 강도 뿐만아니라 동적인 특성도 중요한 관심의 대상이 되어감에 따라 볼 컨트롤을 용이하게 한다거나, 안정타점영역(Sweet Spot)의 확장과 그립부의 진동등에 의해서 발생하는 엘보우 현상을 방지하기 위해 여러가지 연구가 수행되어 왔다. 특히, 다차원 스펙트럼해석 및 모우드 해석법에의해 그립부에 미치는 진동원의 동정과 라켓의 동적거동에 대해서 연구되었고, 라켓의 재질변경과 그립부의 구조변경에 의한 안정타점영역에 영향을 미치는 모우드 파라미터(Modal Parameter)의 추정에 관한 연구도 수행되었다. 이러한 연구들은 결국 안정타점영역을 확장시키거나 테니스 엘보우를 방지하기 위한 것으로서 이러한 목적을 달성하기위해 테니스 라켓의 진동 모우드에 관계되는 파라미터들을 찾아서 그 모우드 파라미터의 변화에 따르느 진동 모우드의 거동에 대해서 연구할 필요가 있다. 본 논문에서는 실험적인 모우드 해석법을 실제 테니스 라켓에 적용하여 모우드 파라미터들을 구한 다음 그 파라미터의 변화에 따르는 안정타점영역의 변화를 컴퓨터 시뮬레이션을 통해서 예측하였다. 또한 안정타점영역을 넓히고 라켓의 동특성을 개선시킬 수 있는 모우드 파라미터를 찾아서 테니스 라켓의 설계, 제작 단계에 정보를 제공하는 CAD(Computer Aided Design)에 좋은 자료를 얻고자 한다. 있으나 파도에 의한 영향이 가장 크므로 본 논문에서는 파도에 의한 영향만을 고려하였다. 파도는 쌍동선에 외란으로 작용하며 측정할 수 없는 양이므로 PID, LQ 제어에서는 제어모델에 포함되지 않지만 LQG 제어에서는 제어모델에 포함된다. LQG 제어의 경우 제어모델에 파도를 백색잡음으로 가정하고 제어기를 구성한 것 (LQG1)과 2차의 쉐이핑필터(shaping filter)를 사용하여 구성한 것(LQG2)으로 나누었다.져 한다.) 식도 이물에 의한, 또는 식도경술에 의한 합병증이 초래한 경우는 식도점막열상 1례 (1.8 %), 식도 천공 1례 (1.8 %) 였으며, 기도이물에 의한, 또는 기관지경술에 의한 합병증이 초래한 경우는 무기폐 2례 (11.1 %), 폐렴 3례 (16.7 %)로 나타났다.5예에서 소실되었다. 5 ) 청각심리검사 (Psychoacoustic evaluation)에서 폴립은 술전에 Grade 1∼2의 사성이 있었던 11예중 술후 10예에서 Grade 0로 되었으며 Grade 1∼2의 사성이 있었던 3예의 결절에서도 모두 Grade 0로 정상화되었다.>치를 측정한 결과 투여전과 차이가 없었다. 7) 이상의 결과로 볼때 Cis-platinum 사용으로 인한 이중독증은 신장기능이 정상일때는 충분한 hydration으로써 예방이 가능하며 동시에 금기로 알려져왔던 감음성난청이 있는 두경부악성종양환자에서도 세심한 주의하에 적절히 사용한다면 좋은 결과를 얻을 수 있을 것으로 사려된다.은 결과를 얻었기에 문헌고찰과 함께 보고하는 바이다. 1) 이관폐쇄술후 18시간에 최초로 삼출액이 확인되었으며 그 이후는 전실험군에서 삼출성중이염이 유발되다. 2

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.1
• /
• pp.5-12
• /
• 2020

Vibration propagated from seismic sources has damping according to distance and amplification and reduction characteristic in different regions according to topography and geological structure. The vibration propagated from the seismic source to the bedrock is largely affected by the damping according to the separation distance, which can be simply estimated through the damping equation. However, it is important to grasp geological information by location because vibration estimation transmitted to the surface are affected by the natural period of the soil located above the bedrock. Geotechnical investigation data are needed to estimate the seismic intensity based on geological information. If there is no Vs profile, the standard penetration tests are mainly used to determine the soil parameters. The Integrated DB Center of National Geotechnical Information manages the geotechnical survey data performed on the domestic ground, and there is the standard penetration test information of 400,000 holes. In this study, the possibility of quantitation the amplification coefficient for each region was examined to calculated the physical interactive seismic intensity based on geotechnical information. At this time, the shear wave column diagram was generated from the SPT-N value and ground response analysis was performed in the target area. The site coefficients for each zone and the seismic intensity distribution for the seismic motion present a significant difference according to the analysis method and the regional setting.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.4
• /
• pp.503-514
• /
• 2006

FBG sensors are capable of measuring the strain of structures easily and more durably than electric resistance gauges. Thus, many researches are dedicated to the application for the response monitoring or non-destructive evaluation of structures using FBG sensors. Additionally, the measured strains at the top and bottom of a cross-section can be transformed into the curvature of the section, which can be used to calculate its vertical displacement. Hence, this study aims to measure the dynamic strain signals of a steel section simply supported beam and to estimate the dynamic displacement from the strain signals, after which the estimated displacement is com pared with the measured displacement. The dynamic characteristics (natural frequency, damping ratio and mode shape) of the beam are predicted from both the estimated and measured displacement signals, and from the strain time history of the FBG sensors. The predicted properties are compared with those of an analytical model of the beam. The estimated displacement. However, the predicted dynamic properties from both the estimated displacements and the measured strains are well-correlated with those from the measured displacement. It is therefore appreciated that the estimation of the dynamic properties of FBG sensor signals is reasonable. Especially, the strain signal of the FBG sensor was amplified at a higher-frequency region in comparison with the displacement estimation with higher-mode properties.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.162-174
• /
• 1996

Longline type aquaculture facilities in the open sea are based on the cable-buoy-weight mooring system. For their optimal design it is necessary to estimate tensions along the mooring lines including the attachment points of buoys and weights. However, the dynamic analysis is very complicated due to the nonlinear behaviors of the mooring lines and the effects of wave and current. In this paper, parametric studies for various buoy-weight cases are shown. Finite difference scheme is employed in obtaining eigenfrequencies in the frequency domain. Nonlinear hydrodynamic drag forces are equivalently linearized.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.187-188
• /
• 2004

압전식 충격파 쇄석기를 사용하여 대상물을 파쇄하는 과정에서 발생하는 음의 특성을 조사한 결과, 대상물이 파쇄됨에 따라 방사음이 더욱 저주파대로 이동한다는 사실을 알았다. 이 사실을 입증하기 위하여 대상물의 파쇄상태를 모델링한 대상물을 사용한 실험에서는 동일한 결과를 관측할 수 있었다. 따라서, 본 논문에서는 실험적으로 추정된 연구결과를 이론적으로 확인하기 위하여 유한요소법을 이용한 수치 시뮬레이션을 실험과 유사하게 모델링한 대상물에 실행하였고, 시뮬레이션에서 관측된 결과를 제시하여 대상 연구결과의 유효성을 입증하였다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.23 no.3
• /
• pp.10-16
• /
• 1986

This paper deals with a simple, approximate formula to predict the natural frequencies of the sagged cable structures. Assuming that the propagation velocity of the lateral wave is dependent only on the local mass per unit length and local tension, the explicit simple formula to predict the fundamental period is newly derived. The modified form of these formula is also presented for the prediction of the fundamental period of general shaped cable structures. The results of comparison shows fairly good agreements with experimental results and with theoretical ones. This formula is also used to predict the natural frequencies of a long vertical cable and the derived approximate formula in that case, becomes identical to the exact solution.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.891-901
• /
• 2016

By comparing test blasting data experimented in three layered-structure polymorphic grounds to a geological profile, influence of blast vibration with respect to uncontrollable ground characteristics was analyzed. Inefficient blast have been performed without sufficient verifications or confirmations because insufficiencies with regard to experiments and data of blasting engineering on the layered structures to be irregularly repeated clinker layer consisted of volcanic clastic zones. It is difficult to quantify N values of clinkers within test blasting region because they have diverse ranges, or coverages. An absolute value of attenuation coefficient N in a field, estimated by blasting vibration predictive equation (SRSD), are lesser than criteria of a design instruction, meaning that vibrations caused by blast can spread far away, and the vibrational characteristics of blasting test No.1, indicating relatively small values, inferred by the geological profile, pressures of gas by the explosion may be lost into a widely distributed clinker layers by penetrating holes resulted from blast into vicinity of clinker layers located in bottom of soft rock layers at the moment of blast. As a result, amounts of spalling rocks are decreased by almost half. Also, ranges of primary frequencies in the fields are identified as similar to those of natural frequency of typical structures.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.609-616
• /
• 2008

Recently, many ocean bridges that connect land to island or island to island have been constructed along with the improvement of the nation's economy. Long-span bridges can be categorized as suspension bridge, cable-stayed bridge, arch bridge and truss bridge. In this study, correction with respect to construction error can be presented on site through the monitoring of the cable tension change of real structure for four major construction stages so that construction accuracy, including the management of profiles, can be improved. A vibration method, the so-called indirect method that uses the cable's natural frequency changes from the acceleration sensor installed on the cable, is applied in measuring cable tension. In this study, the estimation formula for the effective length of cable with damper is presented by comparing and analyzing between actual measurement and analysis result for the change of the cable's effective length. By the way, it is known that the reliability of estimating cable tension by applying the former method that uses the net distance from damper to anchorage is low. Therefore, for future reference of the maintenance stage, the presented formula for estimating the effective length of cable can be used as a reference for the rational decision-making, such as the re-tensioning and replacement of cable.

• Explosives and Blasting
• /
• v.19 no.1
• /
• pp.71-84
• /
• 2001

Korean peninsula has the most mountainous areas such as mountains and hilly country, and it is surrounded by the sea on all sides but one. In this respect, a large scaled construction works have frequently been conducted. However, it is not easy to porform a large scale blasting work without giving any harm to houses or facilities nationwide. Therefore, blasting work becomes more closely related to maintenance thing due to the development of the downtown or a large structure for key facilities. Many researches on blast in the open space and tunnel blasting have been conducted. On the contrary, research on underwater blasting operations is comparatively scanty even though much more necessity of marine development is required. In this respect, this study aims to investigate the characteristics of underwater blasting operations and to make a comparative study with blast in the open space. As a result of examining into the characteristics during underwater blasting operations, the around oscillation in case of underwater blasting operations shows significantly low compared to that in case of blast in the open space, and this means that much more cautious altitude must be taken in designing underwater blasting operations compared to the design of blast In the open space. As a result of analysis on the difference between a square root and a cube root In the equation of estimating oscillations in the actual site, it is shown that it is shown to apply a square root for the estimation of oscillation at 60 meters in case of underwater blasting operations and at 22 meters case of general blast in the open space.