• The Journal of Engineering Geology
• /
• v.22 no.1
• /
• pp.49-58
• /
• 2012

Anchor heads a recommonly exposed to surface weathering processes that cause physical damage by vibration and external forces. This study presents a new method of anchor-head installation that uses near-surface embedding based on analyses of concrete block failure. ABAQUS 3D numerical modeling performed to compare this method with the standard technique and to analyze the distribution of displacement and the stress pattern. In addition, application of the method to a real-world case was tested by in-situ measurements. The results show a maximum vertical stress of 9.73 MPa and vertical displacement of 1.34 mm. Field tests indicated that displacement of a concrete block was 3 to 4 times greater than that of an embedded bearing plate.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.28-37
• /
• 2002

Acoustic behavior in combustion chamber with acoustoc cavity is numerically investigated by adopting linear acoustic analysis. Helmholtz-type resonator is employed as a cavity model to suppress acoustic instability passively. The tuning frequency of acoustic cavity is adjusted by varying the sound speed in acoustic cavity. Through harmonic analysis, acoustic pressure responses of chamber to acoustic oscillating excitation are shown and the resonant acoustic modes are identified. Acoustic damping effect of acoustic cavity is quantified by damping factor. As the tuning frequency approaches the target frequency of the resonant mode to be suppressed, mode split from the original resonant mode to lower and upper modes appears and thereby damping effect is degraded significantly. Considering mode split and damping effect as a function of tuning frequency, it is desirable to make acoustic cavity tuned to maximum frequency of those of the possible splitted upper modes.

• Journal of the Korean Vacuum Society
• /
• v.14 no.1
• /
• pp.29-34
• /
• 2005

The degradation of the SiGe hetero-junction bipolar transistor(HBT) properties in SiGe BiCMOS process was investigated in this paper. The SiGe HBT prepaired by SiGe BiCMOS process, unlike the conventional one, showed the degraded DC characteristics such as the decreased Early voltage, the decreased collector-emitter breakdown voltage, and the highly increased base leakage current. Also, the cutoff frequency(f/sub T/) and the maximum oscillation frequency(f/sub max/) representing the AC characteristics are reduced to below 50%. These deteriorations are originated from the change of the locations of emitter-base and collector-base junctions, which is induced by the variation of the doping profile of boron in the SiGe base due to the high-temperature source-drain annealing. In the result, the junctions pushed out of SiGe region caused the parastic barrier formation and the current gain decrease on the SiGe HBT device.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.516-521
• /
• 2011

The basilar membrane, an important functional part of the cochlea, is responsible for spectral separation of vibration signals transmitted from the stapes. In current study, scaled-up polymer membranes designed by mimicking the human basilar membrane were used for investigation of the frequency-separation characteristic. Displacement field formed on each polymer membrane was acquired by Laser Doppler scanning vibrometer and post-processed frequency-wise. The locations of the maximum displacement along the centerline were identified and collected for individual frequency range to produce the frequency-position map of individual polymer membrane. The influences of the membrane thickness and material properties on the variation of the frequency separability were discussed.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.177-182
• /
• 2007

한반도 주변해역에서의 해수면 고도는 1993년부터 2005년까지의 기간 동안 연평균 3.89 mm $yr^{-1}$ 상승하였으며， 이는 전세계 해수면 상승률의 1.3배에 해당한다. 본 연구에서는 AVISO (Archiving, Validation and Interpretation of Satellite Oceanographic data)에서 제공하는 복합위성자료 (Topex/Poseidon, Jason-1, ERS, Envisat)인 DT-MSLA (Delayed Time - Maps of Sea Level Anomalies)를 이용하여 동해와 황해, 남해, 한국해협에서의 해수면 고도 변화를 연구하였다. 해수면 고도의 평균적인 변화는 증가하는 경향을 보임과 동시에, 여름에는 $4{\sim}5$년，겨울에는 3년의 주기성을 가지고 진동하였다. 조화분석을 통하여 해수면 고도와 해수면 온도의 연주기 모드와 반년주기 모드의 진폭과 위상을 나타내었다. 해수면 고도의 연주기 진폭은 한반도 주변해역에서 남동쪽이 높게，북서쪽이 낮게 나타나는 반면, 해수면 온도는 이와는 반대의 분포를 보였다. 월별 해수면 고도와 해수면 온도의 상관을 구한 결과，$6{\sim}8$월에 동해와 남해에서 1 / 2달 시간지연 일 때，상관계수가 0.7정도로 높게 나타났다. 이러한 결과를 통해 여름철 동해와 남해가 쿠로시오 해류의 영향을 크게 받고 있음을 짐작할 수 있다.

• Journal of Korea Water Resources Association
• /
• v.50 no.6
• /
• pp.419-427
• /
• 2017

In mountainous rivers, the drag force acting on cobbles abundant in the riverbed surface is important in predicting behavior and response of the river. However there is little research for the drag coefficients of cobbles. This paper is to carry out the experiments for drag force of cobble and analyze the relation between the cobble shape and the drag coefficient. The effects of the shape factor on the drag coefficients $C_D$ when the long axis or the short axis of the cobbles are parallel to the direction of flow velocity were analyzed. The coefficient of drag force increased with the nominal diameter Reynolds number $R_{ep}$. The drag coefficients are greater in short axis than long axis. The coefficient of determination of the relation between $C_D$ and $R_{ep}$ is greater in long axis than short axis. This means that the drag forces acting on the irregularly-shaped cobbles depend on the axis. A change of the drag force distribution has brought about the alternative swing of cobbles. For $R_{ep}$ > 12,000, the amplitude of the swing has been increased sharply and especially was greater in short axis than long axis.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.2
• /
• pp.75-84
• /
• 2010

An in-cabinet response spectrum should be generated to perform the seismic qualification of devices and instruments mounted inside safety-related electrical equipment installed in nuclear power plants. The response spectrum is available by obtaining accurate seismic responses at the device mounting location of the cabinet. The dynamic behavior of most of electrical equipment may not be easily analyzed due to their complex mass and stiffness distributions. Considering these facts, this study proposes a procedure to estimate the seismic responses of a structure by a combination of a test and subsequent analysis. This technique firstly constructs the modal equations of the structure by using the experiment modal parameters obtained from the impact test. Then the seismic responses of the structure may be calculated by a mode superposition method. A simple steel frame structure was fabricated as a specimen for the validation of the proposed method. The seismic responses of the specimen were estimated by using the proposed technique and compared with the measurements obtained from the shaking table tests. The study results show that it is possible to accurately estimate the seismic response of the structure by using the experimental modal parameters obtained from the impact test.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.4
• /
• pp.65-71
• /
• 2000

Finite wordlength effect of the recursive implementation of SDFT(sliding-DFT) is analytically derived in this paper. Representation errors of the twiddle coefficients and the data registers are the two major causes of the spectral errors in the recursive implementation. The noise-to-signal ratio is analytically derived in terms of the coefficients wordlength, the data registers wordlength, and the DFT's block-length used in the computation Error dynamic equation is obtained from the recursive DFT and the probabilistic models for the coefficients error and the round-off error are introduced for the NSR derivation, The result of the NSR derivation is verified with the simulation data.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.4
• /
• pp.174-180
• /
• 2018

In this study, the propagation characteristics of Lamb waves in anisotropic silicon wafers of (100) and (111) direction were investigated by PVDF (Polyvinylidene Fluoride) line-focused transducer. The modified V(f,z) method was used because the Lamb waves are dispersive. For confirming the anisotropy, a line-focused transducer was used and the silicon wafer was rotated 180 degrees at intervals of 1 degree. As a result, $A_0$ and $S_0$ modes were observed. The speed of $S_0$ mode according to propagation direction showed anisotropy which is associated with the crystal structure, and the speed of $A_0$ mode was isotropic. The result is consistent with the crystal structure of silicon and the mechanism of vibration of each Lamb wave modes.

• Geophysics and Geophysical Exploration
• /
• v.4 no.4
• /
• pp.110-114
• /
• 2001

In order to obtain the geological information of the shallow subsurface and the characteristics of resistivity curves to the lateral extent of the gold bearing gravel layer underlaid by a thick layer, electrical resistivity surveys had been carried out in the northern area of Takaoi village, Kalimantan, Indonesia from September 30th to October 27th in 1999. The Dipole-Dipole (Dp-Dp) resistivity survey was carried out with a electrode spacing of A=3m, 5m and electrode separation index n=10, and the vertical electrical sounding (VES) of the Schlumberger type was performed at 6 sites. The interpretation of the Dp-Dp data and VES curves by computer modeling indicates 5 classified layers as the horizontal structure. And the characteristics of VES curves shows us KH type.