• 제목/요약/키워드: 진동레벨

검색결과 303건 처리시간 0.021초

진동 신호처리에 의한 기계상태 진단 및 결함 탐지

  • 은희준
    • 기계저널
    • /
    • 제24권6호
    • /
    • pp.428-436
    • /
    • 1984
  • 기계 시스템이 점차 복잡해지는 현재의 추세에서 진동 분석기술은 기계 설계자와 사용자에게 모두 필수적인 도구로서 등장하고 있으며, 이에 따라서 분석기술도 단순한 진동 레벨측정이나 주파수 분석의 단계를 넘어서서 점차 복잡한 신호처리를 요구하고 있다. 본 논문에서는 기계 진동분석에 의한 상태진단과 결함탐지 기술에 대한 기본적인 개념을 설명하고, 이 기술의 응용에 따르는 실질적인 문제들을 실제 측정예와 병행하여 논술하고자 한다.

  • PDF

KHST 차량 벽면의 투과손실값 예측 (Transmission Loss Prediction of KHST's Wall Section)

  • 김관주;윤태중
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문집
    • /
    • pp.104-109
    • /
    • 2002
  • The purpose of this study is to calculate transmission loss of KHST passenger vehicle's wall section accurately Typical transmission loss measurement of wall in the laboratory condition was carried out in advance, which is easier than KHST. Transmission loss results were compared with those by statistical acoustic method. Transmission loss values of KHST calculated by experimental method are compared with those from closed form solution.

  • PDF

KHST 차량 벽면의 투과손실값 예측 (Transmission Loss Prediction of KHST′s Wall)

  • Kim, Kwanju;Taejung Yoon
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문초록집
    • /
    • pp.317.2-317
    • /
    • 2002
  • Transmission loss of KHST passenger vehicle was calculated using measured acoustic data: In order to verify the transmission loss results for KHST case, similar experiment was carried out in laboratory condition, which result was compared those by geometric acoustic method. The computational results shows good agreement with the transmission loss magnitude from experiments. This paper also mentions items to obtain more accurate transmission loss values, i. e. how to assure reverberant field condition, the selection of source speaker' location.

  • PDF

발파진동 예측방법에 관한 연구 (A Study on the Prediction Method of Blasting Vibration)

  • 이연수
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2006년도 추계학술대회논문집
    • /
    • pp.361-365
    • /
    • 2006
  • In order to predict method of blasting vibration in ground and it's resident located around blasting field in urban area, blasting vibration characteristics were measured the vibration velocity(cm/sec), vibration acceleration($cm/sec^2$), vibration acceleration level(dB) and vibration level(dB(V)). The charged powder were used to 1.25kg and measuring sites were 25 points front 4m to 90m at the ground. The correlation of vibration velocity, vibration acceleration, vibration acceleration level and vibration level by square root scaled distance and cube root scaled distance were investigated. The correlation of PPV(peak particle velocity) velocity by SRSD(square root scaled distance) and CRSD(cube root scaled distance) was 0.85 and 0.86 and the correlation of PVS(peak vector sum) velocity by SRSD and CRSD was 0.82. Also vibration acceleration, vibration acceleration level and vibration level by SRSD and CRSD was 0.61, 0.62 and 0.82, respectively. As results, the vibration velocity and vibration level(dB(V)) was showed good correlation, but the vibration acceleration and vibration acceleration level was not showed good correlation.

  • PDF

군용항공기 소음평가 단위에 관한 연구 (A Study on the Evaluation Unit of a Military Aircraft Noise)

  • 이준호
    • 한국소음진동공학회논문집
    • /
    • 제15권5호
    • /
    • pp.550-557
    • /
    • 2005
  • Korean 'Law of Aviation' and 'Test Method of Measuring Noise and Vibration' designate to use WECPNL metric based on $L_{max}$ measurement for the accessment of aircraft noise in Korea. However, time duration of noise event can not be considered in $L_{max}$ metric in principle, compensation on the duration has been utilized. A study was done recently to evaluate appropriate duration compensation for the accessment of military aircraft noise under current metric of WECPNL and $L_{max}$. This study was carried out to evaluate what metric is the most appropriate to express aircraft noise including time duration of single noise event, computing and comparing noise exposure with 1 second noise measurement data of military aircraft in $L_{max}$, $L_{Aeq,\;T}$ and SEL. This study shows SEL is the most appropriate noise metric for the evaluation of noise exposure with time duration such as aircraft noise without compensation. It is suggested to use SEL noise metric instead of $L_{max}$ noise metric with duration compensation for the aircraft noise accessment either military aircraft or civilian aircraft.

제주 거문오름 용암동굴계의 진동영향에 관한 실험적 연구 (Experimental Study of the Effect of Vibration on the Geomunoreum Lava Tube System in Jeju)

  • 송재용;이근춘;안웅산;임현묵;서용석
    • 지질공학
    • /
    • 제30권3호
    • /
    • pp.327-345
    • /
    • 2020
  • 본 연구는 제주도에서 각종 개발과정 중 발생되는 지반진동이 용암동굴에 미치는 영향에 대해 분석하고, 용암동굴의 효율적인 관리보존 대책을 마련하기 위해 수행되었다. 이를 위해 제주도 거문오름동굴계분포지역에서 암질별 RMR과 Q-system 암반분류를 통해 지반상태를 평가하였고, 시추공 내에서 발파를 수행하여 만장굴 및 용천동굴에서 진동속도를 측정하였다. 암반분류 결과와 진동속도를 분석한 결과 암질이 좋을수록 진동의 영향이 크고, 암질이 불량할수록 진동영향이 작게 나타나는 경향을 보였으나 지반불균질성 등의 이유로 선형관계가 뚜렷하게 나타나진 않았다. 진동시험 결과를 토대로 진동속도(PPV)와 진동레벨(dB(V))의 상관관계식을 도출하였으며, 생활진동규제기준(진동레벨 주간 65 dB(V), 야간 60 dB(V))을 만족하려면 진동속도가 주간 0.371 cm/s, 야간 0.285 cm/s인 것으로 계산된다. 야간 진동기준이 더 보수적인 값이므로 허용진동기준은 0.285 cm/s 이하로 설정될 필요가 있다. 연구지역에서의 발파진동추정식 결정을 위하여 자승근 환산거리 및 삼승근 환산거리에 대해 선형 회귀분석을 수행한 결과, 결정계수(R2)가 0.76 이상으로 나타나 양호한 신뢰성을 가지는 것으로 평가되었다. 도출된 발파진동추정식의 자승근 관계식을 적용하여 문화재 진동기준치인 0.2 cm/s를 만족하는 장약량을 산정하였고, 동굴에서 50 m 이격된 경우 2.88 kg, 100 m 이격된 경우 11.52 kg으로 계산되었다.

수음실 내 구조체의 진동량 계측을 통한 바닥충격음레벨 예측 (Prediction of Floor Impact Sound by Measuring the Vibration Acceleration Level on the Interior Structures of Receiving Room in Apartment Buildings)

  • 김명준;김흥식;김하근
    • 한국소음진동공학회논문집
    • /
    • 제13권1호
    • /
    • pp.3-9
    • /
    • 2003
  • In an apartment building, the impact sound from upstairs has been regarded as a main source of noise causing discontentment among occupants. To set the optimum design for sound insulation. it is nesessary to suggest the useful tools or technique that predict the floor impact sound. The purpose of this study is to investigate the applicability of the theory of sound radiation. We measured the vibration acceleration levels on the interior structures and predicted the sound pressure level of the room by using them. The result show that the predicted value, in general, were in good agreement with the measured values within 5∼10% in error rate.

바닥 진동 거동 및 충격원 특성을 고려한 바닥 중량 충격음 평가방법 고찰 (Consideration on Rating Method for Heavy Impact Sound Taking Account of the Characteristics of Floor Vibration and Impact Sources)

  • 이민정;최현기
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제21권4호
    • /
    • pp.69-79
    • /
    • 2017
  • 표준 중량 충격원의 실제 충격원 재현성에 대한 논란이 있음에도 현재 기준에서는 뱅머신 방식만 사용하고 있다. 현행 기준의 평가방법 및 등급 기준이 충격원 특성을 고려하지 못하고 있어 충격원의 선택에 따라 바닥충격음 차단 성능 등급에 차이가 발생하기 때문이다. 본 연구는 충격원 특성 외에 바닥 진동 거동 특성을 함께 고려한 현행 기준의 바닥충격음 평가 방법 고찰을 목적으로 한다. 공동주택 mock-up 실험동에서 표준 중량 충격원과 실충격원에 대하여 바닥충격음을 측정하고 이를 이용하여 해외 평가 방법과 우리나라의 평가 방법을 비교 검토하였다. 또한 현행 바닥충격음 평가 기준의 대상 주파수 범위를 벗어나는 저주파수 대역의 음압레벨은 네텔란드의 저주파 소음 인지 곡선과 국내 연구자가 제안한 저주파 소음 기준안을 이용하여 평가하였다. 그 결과 기준 및 평가 산정 방법에 따라 성능 평가 결과가 상이하며, 바닥 진동의 지배 주파수 범위에서 모든 충격원에 대한 바닥충격음 가청 소음으로 인식하여 성가시게 느낄 가능성이 매우 크다. 현행 평가 기준의 단일수치 평가량 산정 방법은 충격원에 따라 상이한 음압레벨 스펙트럼 특성을 제대로 반영하지 못하며, 바닥의 진동 거동 지배 주파수를 포함하는 저주파수 대역의 음압레벨을 고려하지 않고 있어 바닥충격음에 대한 평가 결과와 사람의 인지 수준에 차이가 발생할 수 있다. 따라서 충격원에 따른 음압레벨의 스펙트럼 특성과 저주파수 대역의 음압레벨을 반영할 수 있도록 현행 기준의 평가 방법을 보완할 필요가 있다.