• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.856-860
• /
• 2007

This paper presents a robust tracking controller design method for the track-following system of an optical recording device. A tracking loop gain adjustment algorithm is introduced to accurately estimate the tracking vibration quantity in spite of the uncertainties of the tracking actuator. A minimum tracking open-loop gain is calculated by the estimated tracking vibration quantity and a tolerable limit of tracking error. A robust tracking controller is designed by considering a robust $H_\infty$ control problem with the weighting function of a slightly larger gain than the minimum tracking open-loop gain. The proposed controller design method is applied to the track-following system of an optical recording device and is evaluated through the experimental result.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.376-382
• /
• 2001

최근 국내에서는 국제규격과의 부합화에 부응하여 바닥충격음에 대한 측정방법이 개정(2001년 6월 19일자 기술표준원 고시 제2001-334호)되어, KS F 2810-1(바닥충격음 차단성능 현장 측정방법 제1부- 표준 중량충격원에 의한 방법)과 KS F 2810-2(바닥충격음 차단성능 현장 측정방법 제2부 - 표준 중량충격원에 의한 방법)으로 규격화되었다. 이는 현장 측정방법으로서 완성된 건축물에 대한 차음성능을 공간성능으로 측정하고자 한 것이다. (중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.150-154
• /
• 2001

도로 및 철도에서 발생하는 소음을 저감시키기 위해 설치되는 방음벽은 흡음률, 투과손실 등과 같은 음향성능 외에도 태풍과 같은 강풍에 견딜 수 잇는 구조성능이 확보되어야 한다. 따라서, 본 논문에서는 지역별 특성 및 풍속을 고려한 풍압을 산정하는 방법을 소개하고, 풍압에 의한 방음판의 구조해석을 수행하였다. 또한, EN 1794-1의 규정에서 정하는 시험방법에 따른 방음판의 하중변형량 시험을 통하여 방음판의 구조성능을 평가하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.979-984
• /
• 2004

The ball bearing having faults generally shows, nonlinear vibration characteristics. For the effective method of fault diagnosis on bail bearing, non-linear diagnostic methods can be used. In this paper, the correlation dimension analysis based on nonlinear timeseries was applied to diagnose the faults of ball bearing. The correlation dimension analysis shows some Intrinsic information of underlying dynamical systems, and clear the classification of the fault of ball bearing.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.137-142
• /
• 2004

The aim of this study is to investigate the characteristics and quantity of the noise reduction by floor coverings. The characteristics on the reduction of the lightweight impact sound level by floor coverings is as follows. The insulation level attained by floor coverings tends to be smaller in actual buildings than in public laboratories. The reduction of the impact sound level to the tape is similar to the method of adhesives. For this reason, the reduction of impact sound level by floor coverings in public laboratories can be utilized to tape. And the reduction of impact sound level by floor coverings is not influenced by the size of specimen except the specific frequency.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.820-825
• /
• 2004

The floating ring seal is used in an oxidizer and a fuel pump of the turbo pump unit in the liquid rocket engine to optimize a leakage without rubbing phenomenon. The damper floating ring seal, one of the floating ring seals, is with round hole pattern surfaces. It can reduce the leakage by increased friction factor that obtained from experimental data. In this paper, the leakage test about floating ring seal and damper floating ring seal was conducted. The test result showed the leakage performance of damper floating ring seal was better than the leakage performance of floating ring seal. With the leakage test the lock-up and rotation test about seal was conducted and that position is measured. The relatively large lock-up eccentric ratio was obtained from the test result of damping floating ring seal. The attitude angle of seal increases with increasing of shaft rotation

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.132-137
• /
• 2000

차량 개발에 있어서 승차감(Ride)과 조향성능(Handling)의 평가는 차량의 동적 성능을 판단하는 주 인자인데, 차량업계에서는 이들 평가의 대부분을 주관적인 방법에 의존하고 있다. 최근에는 주관평가의 문제점을 해소하기 위해 차량의 동적 거동을 직접 측정함으로써 평가를 객관화하려는 시도가 많이 행해지고 있다. 본 연구에서는 숭차감 평가를 위한 정량화 지수를 개발하는데 있어서 저해 요인들을 분석하고 이에 대한 해결방안을 제안함으로써 측정된 물리량을 이용하여 주관평가 결과를 대체할 수 있는 방안을 정립하고자 한다. 우선 정적, 동적 승차감에 대한 모형을 통해서 승차감 정량화의 한계와 기존의 승차감 평가지수에 대해 고찰하고, 실제 차량 시험에서 얻어진 주관 평가치와 측정 가속도간의 상관관계 정립을 통해 관계식을 수립하는 방안에 대해 서술하고자 한다. 이 과정에서 주행시 간헐적으로 들어오는 충격성 입력을 처리하는 방법도 함께 논하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.594-599
• /
• 2000

Two basic acoustic quantities, the characteristic impedances and the propagation constants, of the two different ultra lightweight concrete absorbers were examined with impedance tube method. A transmission loss was tested and compared with theoretical values. The results show that these kinds of sample have proper sound absorption and transmission loss capabilities. It means that they can be used in various fields where noise proof is needed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1108-1113
• /
• 2000

A condition monitoring methodology for rotating machinery is proposed based on multivariate statistical analysis. The CMS usually are using the vibration signal amplitude such as acceleration RMS, peak and velocity RMS to detect machine faults but the information is not so enough that CMS cannot perform reliable monitoring. So new parameters are added such as shape factor, crest factor, kurtosis and skewness as time domain parameters and spectrum amplitude of rotating frequency, $2^{nd}$ harmonics and gear mesh frequency etc. as frequency domain parameters. Many parameters are combined to represent the machine state using the Hotelling's $T^2$ statistics. The proposed methodology is tested in laboratory and the on-line experiment has shown that the proposed methodology offers a reliable monitoring for rotating machinery.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1615-1620
• /
• 2000

The extensive increase of the rotating speed of HDD (hard disk drive) has improved the performance of HDD. One of drawbacks, however, is that it increase noise level. For the systematic noise control of HDD, it is important to know the way in which each source of HDD contributes to resulting noise. A conventional method for contribution analysis by using statistical information, however, is not proper for HDD. This paper reviews the conventional method, and explains the reason why the method is not proper for HDD, even though it is possible to find the number of independent sources by using statistical information. This paper also shows an experimental result for the identification of the number of independent sources of HDD.