• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.140-149
• /
• 1992

The new method, termed the substructural eigensensitivity synthesis method, utilizes the computational merits of the component mode synthesis technique and of sensitivity analysis for the design sensitivities of the dynamic characteristics of substructurally combined structures. It is shown that the eigensensitivities of the entire structure can be obtained by synthesizing the substructural eigensolution and the sensitivities of the eigensolution for the design variables of the modifiable substructure. The sensitivities of the eigenvalues and eigenvectors obtained by the new method are compared to exact eigensolutions in terms of accuracy and computational efficiency. The small errors in eigensensitivity due to the truncation of higher modes remain within a manageable and permissible range for further analysis. The advantage of the newly proposed method as compared to the direct application of sensitivity analysis of the whole structure is demonstrated through examples.

• Journal of the Korean Institute of Gas
• /
• v.12 no.1
• /
• pp.13-18
• /
• 2008

Vibration velocity induced by earthquakes or external vibration sources is one of the integrity assessment indexes, and is also a representative value used to describe the amount of vibration because it is based on a proportional relationship with the damage scale. In this study, the vibration velocity criterion for structures is first examined. Then, based on the velocity criterion, an integrity assessment is performed. Burial condition is set up based on the "Highway and Local Road Design Criteria" with API 5L Gr. X65 pipeline(D=762 mm). The FE model considers DB-24 vehicle load as a time function with a varying velocity in the range of $20{\sim}160\;km/h$. Maximum vibration velocity occurs at v=80 km/h and decreases after v=80 km/h. The maximum vibration velocity of buried pipeline by DB-24 loads is about 0.034 cm/s. The velocity that occurs is in the range of allowable values for each vibration velocity criterion. The wave propagation velocity was identified based on attenuation law and the minimum value appears at vehicle velocity 80 km/h that has maximum vibration velocity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.1008-1016
• /
• 2007

The purpose of this paper is to investigate the Natural Frequency behavior characteristic of Wind Turbine Tower model, and calculated the stress values of thrust load, wave load, wind load, current load, and gravity load. The offshore Jacket Type Tower which was installed in Vitenam South China Sea is used for the study. Natural frequency and mode shape are calculated with commercial program using the measured vibration. The finite element analysis is performed with commercial F.E.M program(ANSYS) on the basis of the natural frequency and mode shape.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.171-177
• /
• 1995

환경 보호와 연비 향상을 목표로 한 고출력 엔진과 초경량 차체의 차량을 설계하려는 최근의 차량 개발 추세는 진동과 소음의 문제를 더욱 악화시키느 요인이 되었다. 이에 반해 차량을 구입하는 고객은 보다 정숙한 주행 성능을 요구하고 있다. 이런 상황에서 커다란 설계의 변경이나 차체의 중량 증가없이도 ㅈ거용가능한 능동 제어 기술(Active Control Technique)은 차량의 진동, 소음문제에서 훌륭한 해결책의 하나로 등장하였다. 최근까지 능동 소음제어와 관련한 연구는 여러 분야에서 수행되었으며, 실제로 시작차량뿐만 아니라 양산차에 적용된 사례가 있다. P.A.Nelson등은 음향 공동내의 음향 에너지를 최소화시키는 소음 제어에 관한 이론, 컴퓨터 시뮬레이션 및 실험에 대하여 발표하였다. 또한 최근의 디지탈 신호 처리기(DSP, Digital Signal Processor)의 개발에 힘입어 해석의 검즈외에도 실제 차량에 적용한 사례도 있다. 로터스(LOTUS,영)는 다양한 시작차를 제작하여 그 효과를 검증하였으며, 닛산(Nissan, 일)은 양산차에 적용하여 판매하고 있는 실정이다. 본 논문에서는 능동 소음 제어 장치를 개발하여 승용차에 적용한 결과를 보이도록 한다.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.5
• /
• pp.129-136
• /
• 2001

본 논문에서는 석탄회 매립지반의 액상화 가능성을 평가하기 위해 순수 모래시료와 더불어서 모래시료와 석탄회가 혼합된 모래시료에 대한 일련의 진동삼축실험을 변형률제어 방법으로 수행하였다. 실험결과 진동하중에 의해서 시료 내에 발생하는 간극수압의 크기는 작용하는 전단변형률의 크기에 심각하게 영향을 받고, 작용하는 전단변형률이 지반의 한계전단변형률 보다 작은 경우에는 진동수가 높은 조건에서도 간극수압이 발생하지 않음을 알았다. 또한 전단변형률이 약 0.1%보다 작고 한계전단변형률에 가까운 경우에는 순수 모래시료와 비교하여 본 논문에서 조사한 석탄회 함유율 범위 (10%~30%)의 시료에서 간극수압이 더 크게 발생하였다. 반면에, 전단변형률이 큰 경우에는 순수 모래시료에서 간극수압이 크게 발생하는 추세를 보였다. 반복 전단에 따른 간극수압의 발생량은 전반적으로 석탄회 함유율이 증가할수록 커지는 경향을 보였다. 이러한 결과를 근거로 해안이나 하천에 인접한 한계지 개발에 있어서 사질토에 석탄회를 혼합 매립하여 지반을 조성하는 경우에 액상화에 대해서 불안정한 지반이 될 가능성이 있는 것으로 판단되었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.471-474
• /
• 2011

본 논문에서는 이러한 문제점을 해결하기 위해서 발전기 고정자의 가진 주파수의 거동패턴을 모델링하고 거동패턴의 위상변화를 학습패턴으로 만들어 오류 역전파 알고리즘으로 학습시킴으로써 고정자 권선 단말부에 대한 상태 감시한다. 고정자 모사장치를 구성하고 장치로부터 가진 데이터를 획득하여 실험한 결과 가진 주파수에서 일정한 형태의 거동패턴을 보였으며, 거동을 학습패턴으로 만들어 오류 역전파 알고리즘에 적용한 결과 뛰어난 성능을 보였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.10
• /
• pp.905-915
• /
• 2011

The free flexural vibration of a hanged clamped-free cylindrical shell partially submerged in water with gap from bottom is investigated. The fluid is assumed to be inviscid and irrotational. The cylindrical shell is modeled by using the Rayleigh-Ritz method based on the Sanders shell theory. The kinetic energy of the fluid is derived by solving the boundary-value problem related to the fluid motion. The natural vibration characteristics of the partially submerged cylindrical shell are discussed with respect to the added virtual mass approach. In this study, experiments were carried out to confirm theoretical results. It was found that theoretical prediction is in good agreement with experimental results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.780-787
• /
• 2013

Virtual Seat Method (VSM) is used in this study for a combined evaluation method (objective & subjective) to determine comfort value of passenger vehicle seat in terms of idle vibration. In the study, a process for applying VSM divided into two stages is established. Two kinds of seat mounting passenger vehicle and six subjects are employed to compare the comfort value obtained by VSM method and by SEAT value. As a conclusion, the results by the two methods were well consistent so that VSM is verified as a method to measure ride comfort of seat in terms of idle vibration at passenger vehicle.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1425-1431
• /
• 2006

In this study, An analysis of correlation between the vibration transmissions and the dynamic characteristics for floor impact sound insulation materials through model test was carried out. As the results, the correlation coefficients between the vibration transmissions and the dynamic characteristics for floor impact sound insulation materials were over 0.8 at the heavy and light floor impact source and less dynamic stiffness was more effective in reducing the vibration transmission.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1313-1316
• /
• 2006

Demands of high volume dry vacuum pumps on the domestic semiconductor and LCD industries are rapidly increasing as the size of wafers and LCD is increasing. This study introduces a new experimental setup for testing the reliability of vacuum pumps. The test system was designed to measure the acoustic pressure and mechanical vibration levels simultaneously. It is shown that the test system enables the analysis and evaluation of the performance of dry pumps under the different gas-load conditions. Detailed experimental result are shown to enable us to examine the characteristics and performance of dry pumps.