• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.167.2-167.2
• /
• 2012

경희대학교와 UC Berkeley, Imperial College London에서 공동으로 진행하는 TRIO-CINEMA Mission(TRiplet Ionosphere Observatory-Cubesat for Ion, Neutral, Electron and MAgnetic fields)은 총 3기의 초소형 위성으로 구성되어 있다. 3기의 위성은 고도 650~800km 상공의 태양동주기 궤도운동을 예상하고 있으며, 지구 근접공간의 입자 검출과 자기장 측정의 과학 임무를 맡게 된다. TRIO-CINEMA 비행 모델(Flight Model)의 환경시험은 진동시험과 열진공시험으로 진행되었다. 진동시험은 X, Y, Z 세 축에 대해 Sine 과 Random 모드로 진행되었다. TRIO-CINEMA가 탑재 될 러시아의 드네프르 로켓의 요구사항은 각 축에서 20Hz 이상의 고유진동수, Sine의 경우 최대 0.8G와 4oct/min Sweep Rate, Random의 경우 5.2Grms 와 35초의 지속시간에서의 안정성을 만족하는 것이다. 시험 결과 TRIO-CINEMA가 요구사항을 모두 만족시키는 것을 확인하였다. 또한, 열 주기 시험(Thermal Cycling Test)을 진행하여 우주공간에서 위성 시스템이 정상 동작하는지에 대한 신뢰성을 검증하였다. 열주기 시험은 미국 MIL표준 값을 참고하여 $10^{-6}Torr$에서 $-20{\sim}30^{\circ}C$의 온도를 주었으며, 시험을 진행하는 동안과 시험 후에 위성이 정상작동 함을 확인하였다. 이에 본 연구의 시험 방법과 그 결과를 기술하였다.

• Journal of Sensor Science and Technology
• /
• v.3 no.2
• /
• pp.33-39
• /
• 1994

A quartz crystal microbalance (QCM) sensor system for the detection of odorants, especially environmental pollutant, has been constructed by depositing various phospholipids, activated carbon and lead compound pigment onto the surface of the QCM. The characteristics of a QCM operating at 9 MHz deposited with phosphatidyl- choline were analysed. An explanation is given for different odorant affinities based on the monolayer properties of phospholipids. The identification of odorants is discussed in terms of a comparison of their normalized resonant frequency shift patterns and relative response intensities calculated from the response areas. Applying the lead compound pigment coated QCM, it was possible to detect sulfur compound specifically. Using a number of different lipid-coated QCMs, odorants could be identified by comparing the response patterns.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.7
• /
• pp.37-42
• /
• 2004

In order to monitor the impact locations in smart structures, multipoint ultrasonic sensors are to be employed. In this study, a multiplexing demodulator with wide dynamic range was proposed to detect the impact locations using FBG sensors, and a stabilization controlling system was also developed for the maintenance of maximum sensitivity of sensors. Two FBG sensors were attached on the bottom side of the aluminum beam specimen and low velocity impact tests were performed to detect the one-dimensional impact locations. As a result, multiplexed in-line FBG sensors could detect the moment of impact precisely, and found the impact locations with the average location error below 0.58mm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.910-912
• /
• 2015

In this paper, we designed the novel capacitive sensor and system for measuring the position of the piston in hydraulic cylinder. The magnetic or LVDT sensors have been widely used to measure the position of the piston because of its high accuracy, but these types of sensor are very expensive and have difficulty in use because of its complexity. To overcome these disadvantages, we studied the optimized non-contact capacitive sensor and designed detecting system for accurate measuring the location of piston in hydraulic cylinder. The proposed capacitive sensor and detecting system have the possibility of practical use for hydraulic cylinder through experiments.

• Smart Media Journal
• /
• v.12 no.10
• /
• pp.19-28
• /
• 2023

In the fruit harvesting field, interest in automatic robot harvesting is increasing due to various seasonality and rising harvesting costs. Accurate apple detection is a difficult problem in complex orchard environments with changes in light, vibrations caused by wind, and occlusion of leaves and branches. In this paper, we introduce a dataset and an adaptive heatmap regression model that are advantageous for robot automatic apple harvesting. The apple dataset was labeled with not only the apple location but also the visibility. We propose a method to detect the center point of an apple using an adaptive heatmap regression model that adjusts the Gaussian shape according to visibility. The experimental results showed that the performance of the proposed method was applicable to apple harvesting robots, with MAP@K of 0.9809 and 0.9801 when K=5 and K=10, respectively.

• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.100-107
• /
• 2023

Open-phase fault in a Permanent Magnet Synchronous Motor (PMSM) occurs due to disconnection of phases of motor windings or inverter switch failures. When an open-phase occurs, it leads to the generation of torque ripples and vibrations in the motor, which can have a critical impact on the safety of the vehicle (including aircraft) using a PMSM as an actuator. Therefore, rapid fault detection and classification are essential. This paper proposes a classification method for detecting open-phase faults and locating fault positions in a PMSM used in aircraft applications. The proposed approach uses an Extended Kalman Filter for fault diagnosis, and it subsequently classifies faults using a Multiple Model filter.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.166-175
• /
• 1991

공구수명에 관한 신뢰성 높은 기준 절삭데이타의 수집은 기계가공시스템을 설계, 운영하는데 중요한 것이다. 이제까지 발표된 절삭공구의 마모측정용 센서로는 절삭저항, AE센사, 진동, 절삭온도 등이 있으며, 이 센서들은 공구마모 특히 플랭크 마모(flank wear) 와 간접적인 관계를 갖고서 별도의 사전 절삭실험에 의해 마모량과 신호 level의 상관관계 및 조정이 필요하기 때문에 본 연구팀에서는 직접적으로 공구마모 상태를 검출하고, 신뢰성이 높은 절삭공구의 마모정보를 얻기 위해 최근 그 응용범위가 확대되고 있는 영상처리기술을 응용한 공구마모 측정장치를 구성하였다.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.37-38
• /
• 1988

In the continuous casting process, mold level sensor control system is very important for the quality of slab & bloom, in this paper, the principle of eddy current molr level sensor was studied and a method of mold oscillation signal detecting was purposed.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.11a
• /
• pp.15-17
• /
• 2020

본 논문에서는 Convolutional Neural Network(CNN)를 이용한 위성 영상 변화탐지 알고리즘을 제안한다. 우선 EfficientNet 기반의 대칭 인코더-디코더 구조의 변화탐지 네트워크를 구성한다. 그리고 디코더 단에 ASPP 모듈을 추가하여 넓은 수용영역을 갖는 특징 정보를 통해 변화지도(change map)를 복원한다. 실험 결과를 통해 검출 성능 및 연산 효율성이 기존 기법보다 우수함을 보인다.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.343-349
• /
• 2004

Electroglottograph(EGG) is a signal recorded from the vocal cord vibration by measuring electrical impedance across the vocal folds through the neck skin. The purpose of this study was to develop EGG system and to evaluate possibility for the application on speech analysis and laryngeal disease diagnosis. EGG system was composed of two pairs of ring electrodes, tuned amplifier, phase sensitive detector, low pass filter, and auto-gain controller. It was designed to extract electric impedance after detecting by amplitude modulation method with 2.7MHz carrier signal. Extracted signals were transmitted through line-in of PC sound card, sampled and quantized. Closed Quotient(CQ), Speed Quotient(SQ), Speed Index(SI), fundamental frequency of vocal cord vibration(F0), pitch variability of vocal fold vibration (Jitter), and peak-to-peak amplitude variability of vocal fold vibration(Shimmer) were analyzed as EGG parameters. Experimental results were as follows: the faster vocal fold vibration, the higher values in CQ parameter and the lower values in SQ and SI parameters. EGG and speech signals had the same fundamental frequency. CQ, SQ, and SI were significantly different between normal subjects and patients with laryngeal cancer. These results suggest that it is possible to implement portable EGG system to monitor the function of vocal cord and to test functional changes of the glottis.