• Clinical and Experimental Pediatrics
• /
• v.51 no.7
• /
• pp.713-721
• /
• 2008

Purpose : This study aims to describe the clinical characteristics of severe meconium aspiration syndrome (MAS) which required mechanical ventilation over 48 h and to delineate the progress of respiratory failure and radiographic findings in severe MAS. Methods : Twelve infants admitted to the Neonatal Intensive Care Unit (NICU) of the Seoul National University Bundang Hospital diagnosed with severe MAS from January 2004 to July 2007 were analyzed retrospectively. Results : The presence of persistent pulmonary hypertension of the newborn (PPHN) is the only independently significant risk factor for a longer hospital stay and longer duration of mechanical ventilation. Surfactant replacement therapy (SRT) was not randomized but only performed in infants with radiographic findings for respiratory distress syndrome (RDS). In the presence of radiographic findings for RDS, the duration of high-frequency oscillatory ventilation was significantly longer. PPHN developed in 8 infants (75%). The PPHN group had a significantly longer duration of mechanical ventilation. All infants who received SRT showed radiographic improvement within 12 h, but there was no significant change in the severity score during the same period. Infants without the PPHN complications showed significant decrease in the severity score within 12 h after SRT, whereas infants with PPHN complications did not. Conclusion : The clinical course of severe MAS differed significantly depending on the development of PPHN. SRT conferred radiographic improvement in infants who showed radiographic findings for RDS, but did not influence the clinical course of MAS significantly.

• Korean Journal of Poultry Science
• /
• v.33 no.3
• /
• pp.189-194
• /
• 2006

This study was conducted to investigate the effects of natural mineral complex supplementation on egg production and characteristic in laying hens. A total of two hundred forty laying hens were randomly allocated into four treatments with ten replications for six weeks. Dietary treatments included 1) CON (control, basal diet) 2) M0.5 (basal diet + 3% chitosan + 0.5% natural mineral complex), 3) M1.0 (basal diet + 3% chitosan + 1.0% natural mineral complek) and 4) M1.5 (basal diet + 3% chitosan + 1.5% natural mineral complex). In the egg production, the M1.5 treatment was significantly higher than other treatments(P<0.05). However, egg weight was significantly higher in M0.5 treatment than CON and M1.0 treatments(P<0.05). Egg shell breaking strength was higher in M1.5 treatment than M0.5 treatment. Egg shell thickness was the highest in M1.5 treatment compared to other treatments(P<0.05). The hens 134 M0.5 diet were improved egg yolk color compared to those fed other diets(P<0.05). The Haugh unit, CON and M1.0 treatments showed significantly different results compared to those of M1.5 treatment(P<0.05). The M1.5 treatment had higher Ca and Fe concentration in blood and higher K concentration in yolk than CON(P<0.05). In conclusion, supplementation of natural mineral complex in laying hen diets influenced on egg production, egg shell qualify and mineral concentration in blood and yolk.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.755-762
• /
• 2000

Physicochemical properties of commercial sweet potato starches manufactured by 7 different companies were investigated in comparison with corn and potato starches. Crude ash and protein content varied from 0.36 to 1.02%, and from 0.04 to 0.14% based on dry weight, respectively. The protein contents were relatively smaller than that of corn or potato starch. But whiteness of the sweet potato starches was less than that of corn or potato starch. Mean diameter of the sweet potato starch granules varied from 14.23 to $21.08\;{\mu}m$ depending on the company and all sweet potato starches showed bimodal size distributions. Pasting viscosity measured by Rapid Viscoanalyzer(RVA) also showed variations among the starches of different companies. The starch from D company in Korea had the lowest pasting temperature$(74.00^{\circ}C)$ whereas the starch from a phillippine company(P) did the highest one$(80.35^{\circ}C)$. The peak viscosity of sweet potato starches was higher than that of corn starch but lower than that of potato starch. The D company starch also showed the highest peak viscosity(2283 cp) among the starches tested. Paste breakdown by hot shearing ranged from 524 cp (S company) to 1279 cp (HL company). Textural properties of the starch gels appeared significantly different among the starches of different manufacturers. The greatest hardness of the gel was $137.90\;g_{f}$ at 1 day storage whereas the lowest value was $31.53\;g_{f}$. Except the starches from 2 companies (P and S), the sweet potato starches formed very soft and weak gels. P or S company starches formed the gels similar to potato starch. Syneresis by freeze-thawing treatments appeared less for sweet potato starch gels than that for corn starch gels, but greater than that for potato starch gel. The overall properties of the sweet potato starches varied by the manufacturing companies, and ranged between those of corn and potato starches.

• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.46-50
• /
• 2004

Compounds of $Y_{3-x}Ce_{x}Fe{5}O_{12}$(x=0.0, 0.1, 0.2, and 0.3) were prepared using the sol-gel method. The XRD measurements show that these samples have only a single phase of the garnet structure regardless of the amount of Ce substitution. The lattice constants of x = 0.0 and x = 0.3 were found to be a$_0$ = 12.3758 ${\pm}$0.0005 ${\AA}$ and 12.4062 ${\pm}$0.0005 ${\AA}$, respectively. The lattice constant increases linearly with increasing Ce concentration. The saturation magnetization was not changed flirty, with increasing Ce concentration, but coercivity decreased form 18.3 Oe to 5.8 Oe as x increased form x = 0.0 to x = 0.1. Mossbauer spectra of $Y_{3-x}Ce_{x}Fe{5}O_{12}$ were measured at various absorber temperatures from 13 K to Neel temperature. The Mossbauer spectra were fitted by least-squares technique with two subpatterns of Fe sites in the structure and corresponding to the 16a and 24d site. The temperature dependence of the magnetic hyperfine field in $^{57}$/Fe nuclei at the tetrahedral 240 and octahedral 16a sites were analyzed based on the Neel theory of ferrirnagnetism. The result of the Debye temperatures indicated that the inter-atomic binding force for the 24d site was larger than that for the 16a site.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.191-200
• /
• 2017

Proper packaging design can meet both the environmental and economic aspects of packaging materials by reducing the use of packaging materials, waste generation, material costs, and logistics costs. Finite element analysis(FEM) is used as a useful tool in various fields such as structural analysis, heat transfer, fluid motion, and electromagnetic field, but its application in the field of packaging is still insufficient. Therefore, the application of FEM to the field of packaging can save the cost and time in the future research because it is possible to design the package by computer simulation, and it is possible to reduce the packaging waste and logistics cost through proper packaging design. Therefore, this study investigated the FEM papers published in Korea for the purpose of helping research design using FEM program in the field of packaging in the future. In this paper, we analyzed the 29 papers that were directly related to the analysis of FEM papers published in domestic journals from 1991 to 2017. As a result, we analyzed the research topic, FEM program, and analysis method using each paper, and presented the direction that can be applied in future packaging field. When the FEM is applied to the packaging field, it is possible to change the structure and reduce the thickness through the stress and vibration analysis applied to the packaging material, thereby reducing the cost by improving the mechanical strength and reducing the amount of the packaging material. Therefore, in the field of packaging research in the future, if the FEM is performed together, economical and reasonable packaging design will be possible.

• Investigative Magnetic Resonance Imaging
• /
• v.12 no.2
• /
• pp.123-130
• /
• 2008

Purpose : Motion effects in parallel magnetic resonance imaging (MRI) are investigated. Parallel MRI is known to be robust to motion due to its reduced acquisition time. However, if there are some involuntary motions such as heart or respiratory motions involved during the acquisition of the parallel MRI, motion artifacts would be even worse than those in conventional (non-parallel) MRI. In this paper, we defined several types of motions, and their effects in parallel MRI are investigated in comparisons with conventional MRI. Materials and Methods : In order to investigate motion effects in parallel MRI, 5 types of motions are considered. Type-1 and 2 are periodic motions with different amplitudes and periods. Type-3 and 4 are segment-based linear motions, where they are stationary during the segment. Type-5 is a uniform random motion. For the simulation, Cartesian and spiral grid based parallel and non-parallel (conventional) MRI are used. Results : Based on the motions defined, moving artifacts in the parallel and non-parallel MRI are investigated. From the simulation, non-parallel MRI shows smaller root mean square error (RMSE) values than the parallel MRI for the periodic (type-1 and 2) motions. Parallel MRI shows less motion artifacts for linear(type-3 and 4) motions where motions are reduced with shorter acquisition time. Similar motion artifacts are observed for the random motion (type-5). Conclusion : In this paper, we simulate the motion effects in parallel MRI. Parallel MRI is effective in the reduction of motion artifacts when motion is reduced by the shorter acquisition time. However, conventional MRI shows better image quality than the parallel MRI when fast periodic motions are involved.

• Horticultural Science & Technology
• /
• v.33 no.4
• /
• pp.518-524
• /
• 2015

The objective of this research was to investigate the influence of various depths of expanded rice hull (ERH) medium and fixation dates of runner plantlets of 'Seolhyang' strawberry on the growths in nursery field and in plastic house soil after transplanting. The five treatments in medium depths (30, 50, 70, 90, and 110 mm) and four treatments in fixation dates (1st and 15th July and 1st and 15th August) were tested. The growths of runner plantlets were investigated before transplanting to plastic house soil. The early growth and inflorescence rates of crops after transplant to plastic house soil were also investigated. The plant height and fresh weight of runner plantlets were the highest in the medium depths of 50, 70, and 90 mm. The medium depth of 30 mm had higher numbers of first roots, but lower root fresh weight compared to those of 70, 90, and 110 mm. The treatment of 30 mm in medium depth showed poorer growth in all indexes except root length and root weight compared to those of 70, 90, and 110 mm. The runner plantlets fixed on July 1 and July 15 showed good root growth and the weights of ERH adhered to form root balls were 18.3 g and 13.9 g, respectively. The detached amount of ERH was less than 40% in the two treatments when root balls were shaken by a vibratory sieve shaker. The plant growth at 45 days after transplanting to plastic house soil were not significantly different when the runner plantlets were fixed in the period from July 1 to Aug. 1. The inflorescence rates of the first cluster were 93 to 100% when runner plantlets were fixed in the period from July 1 to Aug. 1. By contrast the runner plantlets fixed on the Aug. 15 had a 67% in florescence rate for the first cluster. These results indicate that optimum depth of ERH medium was 7 cm and the ranges of optimum fixation dates are from July 20 to 25.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.138-145
• /
• 2013

In order to develop the efficient control algorithm of the two-fluid fogging system, cooling experiments for the many different types of fogging cycles were conducted in tomato greenhouses. It showed that the cooling effect was 1.2 to $4.0^{\circ}C$ and the cooling efficiency was 8.2 to 32.9% on average. The cooling efficiency with fogging interval was highest in the case of the fogging cycle of 90 seconds. The cooling efficiency showed a tendency to increase as the fogging time increased and the stopping time decreased. As the spray rate of fog in the two-fluid fogging system increased, there was a tendency for the cooling efficiency to improve. However, as the inside air approaches its saturation level, even though the spray rate of fog increases, it does not lead to further evaporation. Thus, it can be inferred that increasing the spray rate of fog before the inside air reaches the saturation level could make higher the cooling efficiency. As cooling efficiency increases, the saturation deficit of inside air decreased and the difference between absolute humidity of inside and outside air increased. The more fog evaporated, the difference between absolute humidity of inside and outside air tended to increase and as the result, the discharge of vapor due to ventilation occurs more easily, which again lead to an increase in the evaporation rate and ultimately increase in the cooling efficiency. Regression analysis result on the saturation deficit of inside air showed that the fogging time needed to change of saturation deficit of $10g{\cdot}kg^{-1}$ was 120 seconds and stopping time was 60 seconds. But in order to decrease the amplitude of temperature and to increase the cooling efficiency, the fluctuation range of saturation deficit was set to $5g{\cdot}kg^{-1}$ and we decided that the fogging-stopping time of 60-30 seconds was more appropriate. Control types of two-fluid fogging systems were classified as computer control or simple control, and their control algorithms were derived. We recommend that if the two-fluid fogging system is controlled by manipulating only the set point of temperature, humidity, and on-off time, it would be best to set up the on-off time at 60-30 seconds in time control, the lower limit of air temperature at 30 to $32^{\circ}C$ and the upper limit of relative humidity at 85 to 90%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.116-123
• /
• 2018

The sperm quality is determined by the kinetic characteristics and acrosome integrity of the sperm. In the previous studies, analysis of semen quality had large errors because those experiments by using microscope had been conducted by people. In recent years, the molecular biological methods have been newly developed to complement the previous techniques. The ZAR1 gene is known to be a gene that affects early embryonic development in vertebrates, but there is no study of the association with semen. In this study, we analyzed the association between the kinetic characteristics and ZAR1 single nucleotide polymorphism (SNP) genotype. To detect the SNPs, we performed sequencing using genomic DNA from the whole bloods of Duroc pigs. We identified an SNP in the ZAR1 gene g.2540T>C. ZAR1 SNP genotypeing in 105 pigs revealed that the major and minor alleles were T and C, respectively. After we analyzed the association between the kinetic characteristics of sperm and the ZAR1 SNP genotype, we found a significant association in MOT (p<0.01), VSL (p<0.05) of the kinetic characteristics in the Duroc boars. It was confirmed that the boars with T allele were lower in MOT and VSL than C allele. Therefore, pigs with C allele are judged to be better at the MOT and VSL of semen. Based on these results, ZAR1 SNP genotyping may be a useful molecular biomarker to improve semen quality by applying molecular breeding technology.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.683-689
• /
• 2006

This study was established to investigate the effect of germanium-fortified yeasts on the serum lipid composition and immune system of human body. All 50 subjects with the age range of $50{\sim}75$ were entered in this clinical trial for 6 months. The effects were determined by the proliferative responses of immune-mediated cells, T-cell, B-cell and NK-cell during daily supplementation with/without germanium-fortified yeast. The results of hematology and blood chemistry didn't show any significant differences during administration periods. Serum lipid compositions also didn't show any significant differences during administration periods except triglyceride (TG) and VLDL-cholesterol. TG and VLDL-cholesterol levels were increased significantly by the consumption of germanium-fortified yeast (p<0.05). Immune mediated T-celt and NK-cell didn't increased in both control and test group supplemented with germanium fortified yeast, while B-cell increased in the germanium fortified yeast group after 8 week (p<0.05). Also $TNF-{\alpha}$ increased in the group of germanium fortified yeast after 8 week (p<0.05) but not in the control group. From the above results, germanium fortified yeast is expected to be useful on the improvement of the cellular immune response and protection of organs from various chronic diseases.