• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.4
• /
• pp.69-79
• /
• 2018

We performs the cost-benefit analysis, an economical analysis technique, to measure the effect of a shared public supercomputer. The costs of two given alternatives, to share the public supercomputer in a national center and to employ their own supercomputers in the organizations under the necessity, will be estimated and compared for decision making. In the case of sharing, we can simply predict the cost based on the results of the previous public supercomputer. The cost of individual introduction, however, is almost unpredictable since it has a remarkable variability due to the required system performances, locations, human factor, and so on. Accordingly, an objective and valid method to estimate the cost of individual cases will be proposed in this research. Finally, we analyze the economic effect of operating public supercomputer by comparing the sharing cost with that of the individual employs. The results of analysis confirms that the sharing public supercomputer will reduce the operational cost about 10.3 billion won annually compared with the individual introduction. Accordingly, it is expected that the sharing public supercomputer will bring a considerable economical effect.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.141-151
• /
• 1995

In generating DTM as basic data to GIS, the use of existing map is difficult to aquire current data and the method using airphotos needs cost for stereoplotting and ground control surveying. So, the method of DTM generation by satellite imagery is promising because satellite is able to observe wide area at once. In this study the program for SPOT bundle adjustment and image matching based on Coarse to Fine method is developed and various image enhancement algorithm is used for more accurate DTM generation and also evaluation of accuracy was carried out. Further more, orthophoto, a bird's eye-view, contour map producing, net-work analysis and terrain analysis were performed for GIS applications using generated DTM in this study. Generated DTM using SPOT stereo imagery is useful for GIS applications such as automated mapping, facility management, national geographic information system. Moreover developed automatic DTM generation pro-gram is studied, tested and verified more to be applicable to all the area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.553-559
• /
• 2011

The bicycle use activation plan reduces a greenhouse gas exhaust, and economic convenience, movement timely shortening, health effect will be able to expect but the bicycle user is few. The nationwide bicycle road projects is advanced by the countermeasure for a bicycle use activation. It is advanced a bicycle road basic plan even from each local government. The research against a route selection is advanced actively. But the research against a data process is not coming out the accurate research method. It follows a financial one bicycle road design standard from ministry of land, Transport and maritime affairs. But vertical grade in bicycle road design standard is exception becoming that about unavoidable case with geomorphic environments. From the research which it sees the existing bicycle road consider should have to make the terrain situation of yeosu, slope standard connection about under considering it presented the bicycle road route selection which is possible. It included a lane and road width with additional element and establishment in the bicycle road was produced suitable bicycle road route. The area where the mountain district is many when selecting bicycle road, will be used with application plan of slope standard.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.529-535
• /
• 2012

This paper deals with the determination of mechanical properties of various galvanized steel sheets that are used for fabricating automobile bodies; the instrumented indentation technique and finite element analysis were used for the determination. First, tensile tests were conducted to obtain the true stress-true strain curves of galvanized steel sheets with various thicknesses. Load-deformation curves were then obtained by using the instrumented indentation testing machine, and they were compared with load-deformation curves obtained by finite element analysis. Further, true stress-true strain curves were obtained at the optimal observation point by finite element analysis.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.58.2-58.2
• /
• 2011

국립기상연구소는 2000년부터 2010년까지(11년)의 위성자료와 수치모델의 재분석 자료를 이용하여 한반도영역에 대해서 $4km{\times}4km$ 해상도의 태양-기상자원지도를 계산하였다. 이러한 태양-기상자원지도를 기반으로 GIS 분석도구를 이용하여 지역별 태양에너지의 분포와 지역별 태양광의 기후특성을 분석하였다. 연구영역의 행정구역을 구분하고 각 지역별 에너지분포 및 변화특성을 쉽게 분석하기 위하여 GIS 분석도구를 사용하였다. 평균 연누적 태양에너지 자료를 분석한 결과 한반도에서는 경상도가 가장 풍부한 태양광에너지를 받고 있었으며 특히 대구광역시(5047MJ), 부산광역시(5019.4MJ)가 높게 나타났다. 북한지역에서는 함경남도(4719.1MJ)가 가장 풍부한 자원을 가지고 있는 것으로 나타났다. 월별 분포를 분석한 결과 대체로 연누적과 동일하게 남부지방의 경상도가 높은 태양광 에너지를 나타났다. 특히 7월 등의 여름철은 1월에 비해 절대적으로 에너지양이 많았다. 그러나 위도 38도를 중심으로 빈번한 장마전선을 동반한 구름의 이동으로 중부지방이 남부지방과 북부지방에 비해 낮게 나타났다. 또한 2000년 1월부터 2010년 12월까지 월별 시계열 변화를 분석해본 결과 한반도 전역에서 태양광의 증가추세가 나타났다. 특히 부산광역시는 10년간 3.75MJ이 증가하였으며, 서울특별시는 3.645MJ/decade, 함경북도는 3.499MJ/decade의 증가경향을 보였다. 월별 시계열 그래프를 보면 2003년 8월과 2005년 4월을 기준으로 3부분에서 다른 특성이 나타나는데 이것은 각 구간별로 구름산출을 위하여 사용된 정지기상위성이 다르기 때문이다. 각 구간에서 사용된 위성은 GMS-5(2003년 8월 이전), GOES-9(2003년 8월~2005년 3월) 그리고 MTSAT-1R(2005년 4월이후)이다. 추후에는 태양광 자원이 풍부한 지역에 대해서 더욱 상세하게 태양광 에너지의 분포와 변화를 분석해보자 한다. 이러한 지역별 자원분석 자료는 지방자치단체들이 신재생에너지 개발계획을 세우는데 도움을 줄 수 있을 것이다.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.259-262
• /
• 1999

The copper-catalyzed reaction of silicon with methanol was carried out in a mixed bed reactor to obtain tetramethyl orthosilicate (TMOS). In order to determine the kinetics of the reaction per active site on the silicon surface, a flow rate transition technique was employed. A kinetic study showed the reaction was in Linear relationship with the amount of contact mass and independent on the concentration of methanol. This result indicated that the rate-determining step was not the chemical process involving methanol, but the formation of silicon intermediate on the contact mass. On the basis of optimum experimental conditions, the maximum TMOS formation rate per g-silicon is 0.030 (g/min) at $210^{\circ}C$, in which activation energy was 8.5 kcal/mol and reaction rate equation was $k=4.09{\times}10^4\;exp$ ($-4.73{\times}10^3/T$).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.6
• /
• pp.504-510
• /
• 2004

The objective of this paper is to propose the image interpolation method with pseudomedian filter for Field warping and morphing, and to evaluate and analyze its subjective image quality. The Field warping relatively gives rise to more computing overhead, but it can use the control line to control the warping result with more elaboration. Due to the working characteristics of the image warping and morphing process, various complex geometrical transformations occur and a image interpolation technique is needed to effectively process them. Of the various interpolation techniques, bilinear interpolation which shows above average performance is the most widely used. However, this technology has its limits in the reconstructivity of diagonal edges. The proposed interpolation method is to efficiently combine the bilinear interpolation and the pseudomedian filter-based interpolation which shows good performance in the reconstructivity of diagonal edges. According to the proposed interpolation method, we could get more natural warping and morphing results than other interpolation methods.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.41-49
• /
• 2011

Recently, the infrastructure of stereoscopy is growing fast. Though, the stereoscopy producing capacity is insufficient to meet the demand of the market. Because, at the moment most people who produce the stereoscopy are skilled for the two-dimensional images. So the characteristics of the human stereopsis and stereoscopic cameras are not well considered, it occurs many problems to the viewer. According to this, we studied about the optical axis distance adjustment of stereoscopic camera considering size perception in human stereopsis. First, we measured the area of the object in the image which depends on the optical axis distance. Second, based on the output of first experiment, we conducted a survey and figured out that if we keep the optical axis distance between 3.9cm to 130cm, it wouldn't occur any size perception and will be possible to produce high quality stereoscopy.

• Korean Journal of Optics and Photonics
• /
• v.18 no.6
• /
• pp.410-420
• /
• 2007

We theoretically derive the set of utilizable paraxial zoom locus equations for all complicated zoom lens systems with infinite object distance, such as a camera zoom lens, by using the Gaussian bracket method and the matrix representation of paraxial ray tracing. And we make the zoom locus program according to these equations in Visual Basic. Since we have applied the paraxial ray tracing equations into Gaussian bracket representation, the resultant program systematically simplifies various constraints of the zoom loci of various N group types. Consequently, the solutions of this method can be consistently used in all types of zoom lens in the step of initial design about zoom loci. Finally, in order to verify the usefulness of this method, we show that one example among 4 groups and that among 5 groups, which are very complex zoom lens systems, can be rapidly and with versatility traced through various interpolations by using this program.

• Journal of The Korean Association of Information Education
• /
• v.21 no.3
• /
• pp.267-275
• /
• 2017

The purpose of this study is to analyze the teachers' perceptions about the various evaluation methods used in SW education and to find ways to improve the usefulness of the field. To do this, we surveyed the teachers who were educated about SW education evaluation. As a result of the study, it was recognized that the use of output, portfolio, and observation evaluation in SW education class is suitable for evaluating Computational Thinking(CT) and useful for field application. On the other hand, paper and self-evaluation are useful for field application, but they are relatively inadequate to evaluate CT. Portfolio, design, and interview evaluations are good for measuring CT, but they are difficult to apply to the field. Also, evaluation criteria, evaluation factors, and strategies were found to be difficult to apply. Therefore, we suggest the necessary measures to apply SW education evaluation method more effectively.