• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.83-93
• /
• 1997

This paper deals with measurements and evaluation of the time-changing electric and magnetic fields at a high-voltage laboratory. The electromagnetic disturbances originate mainly from ground faults and on/off operations of electric power equipments. The electronic circuits and control devices are very sensitive to electromagnetic interferences. It is necessory to evaluate the levels of interferences for a given electromagnetic environment. The electric field was observed by the electric field sensor having the bandwidth of the range from 40 Hz to 200 MHz, and the time-changing magnetic field was measured by the loop sensor of which the output is directly proportional to the incident signal. Also, the frequency components of the time-changing electric and magnetic fields induced by an oscillatory transient current and a chopped impulse voltage were analyzed by terms of the fast Fourier transformation, and those give the information about the levels of the electromagnetic interferences and the design of the electromagnetic shielding enclosures.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.1
• /
• pp.8-14
• /
• 1998

This paper describes a novel real-time based optimal Pulse Width Modulation (PWM) method suitable for microprocessor-based PWM inverters. Optimal switching patterns minimizing the performance index corresponding to the distortion between the reference and the controlled output voltages are decided by on-line calculation using the microprocessor-implemented control system. To show the effectiveness of the proposed PWM scheme, digital simulation studies and experiments using a 16-bit single-chip microcontroller (Intel 80C196KC) are performed. The results obtained from these simulation studies and experiments show that the proposed PWM scheme has better performance than the other methods such as the natural PWM and the direct PWM.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.127-135
• /
• 2006

We implement numerical simulations for the distributed optical fiber sensor system that uses the spatially-selective Brillouin scattering, by treating the superposition of the optical-frequency-modulated pump/probe waves in the time domain. We obtain temporal and spatial distributions of Brillouin gain for various cases. Simulations are applied to the case of concatenated optical fibers of different kinds and the case of distributed temperature along the fiber, which give reasonable results for the distributed sensor. The result of using a triangular wave instead of a sinusoidal one as a modulation waveform shows that the triangular wave modulation has an advantage in spatial resolution.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.3
• /
• pp.234-241
• /
• 2011

This paper proposes a simple static overmodulation strategy that extends the linearity of the inverter output voltage. The proposed method obtains the reference vector having the instantaneous value directly from the modulation index based on the magnitude of fundamental voltage, and has a simplified form of phase command. This method does not need trigonometric functions for calculating the magnitude of the reference vector. The magnitude of reference voltage and holding angle in the overmodulation region corresponding to the modulation index are determined in advance to have the same fundamental voltage magnitude by using the result of Fourier series expansion.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.3
• /
• pp.216-225
• /
• 1994

By use of laboratory experiment data set for an elliptic shoal by Berkhoff et al. (1982), both accuracy and Performance tests of numerical results between PCGM (Preconditioned Conjugate Gradient Method) and PA(Parabolic Approximation) are compared. Although both results show good agreement with the experimental data the PA model gives better reproduction of the relatively high amplitudes in the section 4-5 downwave of the shoal, in comparison with the PCGM. The PA model has been proved to be a useful tool for predicting wave transformationsin large shallow water region, but it can be applied only to the case of negligible reflection. On the other hand, there is a need to improve the computational efficiency of the PCGM model which is a finite difference scheme directly derived from the mild slope equation and can handle reflection. By taking the results of th PA model as an input data of the PCGM, the CPU time can be reduced by about 40%.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.2
• /
• pp.127-131
• /
• 2009

In the digital waveguide theory, traveling waves are represented by general solution to the wave equation that is second-order linear partial differential equation. The movement of these waves can be implemented using only delay lines. An unit delay in the general digital waveguide describes a sampling time interval. However, in the space-based digital waveguide the unit delay implies the spatial sampling distance. In consideration of these differences between two models, it is known that the space-based digital waveguide model is adequate to synthesize pitch-shifted sounds such as vibrato because the propagation distance can be directly control. In this paper, the time-based digital waveguide model which also synthesizes pitch-shifted sounds is proposed and compared with space-based digital waveguide.

• Geophysics and Geophysical Exploration
• /
• v.3 no.4
• /
• pp.125-128
• /
• 2000

An ad hoc method of deriving three-dimensional elastic Greens solution for displacements is proposed in this study; Instead of direct evaluation of four-dimensional Fourier integral that is usual in spectral approaches, we first derived the expression for particle acceleration using the calculus of residues, and then, derived the expression for particle displacement by direct formal integration with respect to time. As a result, we can detour the disconcertion related to causality due to directly evaluating the integral with respect to angular frequency in conventional spectral approach.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.82-98
• /
• 1994

A mathematical model for the hydrodynamic forces acting on the ship manoeuvring in waves is formulated and a numerical method for the problem is developed. The motion of a ship, which manoeuvres in waves, may be thought to have two components; one is a high frequency component due to encounter waves, and the other is a low frequency component due to manoeuvring motion. So the method of two time scale expansion is used to divide linear boundary value problem. For the effects of waves on the manoeuvring motion of a ship, only the second order drift forces are considered. The integral equation for the velocity potential is solved by 3 dimensional panel method and hydrodynamic forces are calculated by direct integral method.

• Journal of Digital Convergence
• /
• v.11 no.6
• /
• pp.1-9
• /
• 2013

The digital signal is terminated on Dec.31, 2012. But most of the analog cable subscribers are faced with the difficult reception of the digital because the government has defined the terrestrial broadcast as digital transition obligation operators. It is estimated that half analog of the total pay-TV subscriber that is approximately 10million households that are directly receiving terrestrial signal must hold the digital TV or DtoA convertor to transit digital. But cable system subscriber should buy Set-top box that are expensive and pay the expensive rates. The cast of analog cable subscribers has been classified as a group that can cause the most damage after digital switch. This study investigate the problem, and cause, solution of the analog cable subscribers that are placed in the blind spots of the digital switch.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.572-588
• /
• 2013

In this paper, 4K-UHDTV or 8K-UHDTV and UHD-3DTV that the next generation broadcasting implementation and the possibility of direct receiving environment construction is analyzed on the terrestrial broadcasting. Particularly, we investigated the possibility by analyzing the previous and related works with regard to UHDTV transmission by DVB-T2 that is one of the best commercialized transmission mode. In order that the UHDTV broadcasting succeeds once again after completion of digital terrestrial switch over at the end of 2012, the ultra high resolution image transfer is important. However, the direct, the indoor and ubiquitous receiving environment is important in not only TV but also the personal type multimedia terminal in the sense of UHDTV service penetration. Therefore, in this paper, by using SFN and high error-correcting mode in DVB-T2 standard, the efficient frequency utilization and effective reception environment construction is illustrated. Particularly, SFN network constitution by 2 mutually different frequencies including the VHF bandwidth and UHF band, and etc. is shown. And the method that builds the free wireless receive environment by using SFN low power radio repeater and for home use gap filler is proposed. And the effect and frequency amount required are presented, when UHDTV broadcasting use 10MHz bandwidth.