• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.211-211
• /
• 2019

본 연구의 목표는 제주도를 대상으로 한 강우-유출 과정에서 적절한 CN값의 결정 및 초기손실의 규모를 판단하는 것이다. 제주도는 화산 활동으로 형성된 섬으로 투수성이 좋은 다공질 화산암류 및 화산회토로 이루어져 침투가 쉽게 발생한다. 이러한 토양 특성으로 인해 제주도 유역의 유출해석 수행 시 내륙지역과 동일한 방법을 적용하는 데 한계가 있다. 기존 제주도의 강우-유출연구를 살펴보면 초기손실의 고려방법이나 선행함수조건의 고려방법이 달라 상대적인 비교가 모호해지는 문제가 있다. 또한 고려방법에 따라 유출해석 결과가 서로 상충되기도 하여 유의한 결론을 제시하는데 무리가 따른다. 이에 본 연구에서는 제주도 지역의 CN 및 초기손실에 대한 검토를 수행하였다. 이를 위해 대상유역은 한천 유역으로 선정하였으며, 호우사상은 2012년과 2014년에 발생한 태풍 '카눈', 태풍 '볼라벤', 태풍 '산바', 태풍 '나크리' 호우사상을 적용하였다. 한천 유역의 CN과 초기손실에 대한 검토를 위해 강우 자료는 대상 유역 인근 제주(184), 아라(329), 어리목(753), 진달래밭(870), 윗세오름(871) 지점의 강우 자료를 이용하였으며, 유출량 자료는 한천 하류에 위치한 제4한천교에 관측된 수위 및 유속 자료를 이용하였다. 먼저 각 호우사상별 총 유출량을 기저유출과 직접유출으로 분리하고 직접유출량에 대한 유호우량을 산정하였다. 다음으로 산정된 유효우량을 NRCS의 유효우량 산정방법에 적용되는 총 유량-유효우량 관계모형에 적용하여 유역의 최대잠재보유수량을 산정하였다. 이때 초기손실량은 유역의 최대잠재보유수량의 20%, 30%, 40%로 가정하였다. 마지막으로 산정된 최대잠재보유량을 최대잠재보유수량-CN 관계식에 적용하여 CN을 산정하고, 기존 연구에서 적용한 한천 유역의 CN과 비교하여 그 결과를 검토하였다.

• Journal of ILASS-Korea
• /
• v.17 no.4
• /
• pp.197-204
• /
• 2012

The vast stores of biomass available in the worldwide have the potential to displace significant amounts of fuels that are currently derived from petroleum sources. Fast pyrolysis of biomass is one of possible paths by which we can convert biomass to higher value products. The wood pyrolysis oil (WPO), also known as the bio crude oil (BCO), has been regarded as an alternative fuel for petroleum fuels to be used in diesel engine. However, the use of WPO in a diesel engine requires modifications due to low energy density, high water contents, low acidity, and high viscosity of the WPO. One of the easiest way to adopt WPO to diesel engine without modifications is emulsification of WPO with diesel or bio diesel. In this study, a DI diesel engine operated with diesel, bio diesel (BD), WPO/BD emulsion was experimentally investigated. Performance and gaseous & particle emission characteristics of a diesel engine fuelled by WPO/BD emulsion were examined. Results showed that stable engine operation was possible with emulsion and engine output power was comparable to diesel and bio diesel operation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.143-148
• /
• 2010

In this study, the potential possibility of biodiesel fuel(BDF) and oxygenated fuel(ethylene glycolvmono-n-butyl ether; EGBE) was investigated as an effective method of decreasing the smoke emission. The smoke emission of blending fuel (BDF and EGBE 0~20 vol-%) was reduced in comparison with diesel fuel and it was reduced approximately 64% at 2000 rpm, full load in the 20% of blending rate. But torque and brake specific energy consumption( BSEC) didn't have no large differences. Also, the effects of exhaust gas recirculation(EGR) for the reduction of NOx emission has been investigated. Consequently, It was found that simultaneous reduction of smoke and NOx emission was achieved with BDF(90 vol-%) and EGBE(10 vol-%) blended fuel and cooled EGR method(5~10%).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.2
• /
• pp.43-48
• /
• 2008

The exhaust emissions of diesel engine are recognized as a major cause influencing environment strongly. In this study, the possibility of biodiesel fuel and oxygenated fuel(dimethoxy methane; DMM) was investigated as an alternative fuel for a naturally aspirated direct injection diesel engine. The smoke emission of blending fuel(biodiesel fuel 90vol-%+DMM 10vol-%) was reduced approximately 70% at 2500rpm, full load, in comparison with the diesel fuel. But, power, torque and brake specific energy consumption showed no significant differences. But, NOx emission of biodiesel fuel and DMM blended fuel increased compared with commercial diesel fuel due to the oxygen component in the fuel. It was needed a NOx reduction counterplan that EGR method was used as a countermeasure for NOx reduction. It was found that simultaneous reduction of smoke and NOx emission was achieved with BDF(95 vol-%) and DMM(5 vol-%) blended fuel and cooled EGR method(15%).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.291-291
• /
• 2011

플라즈마에 노출된 재료 표면의 온도 증가는 다음과 같은 요인에 의해서 결정된다. 이온의 충돌에 의한 역학적 에너지, 이온의 중성화, 라디칼의 안정화에 의한 에너지 방출(잠열, latent heat), 플라즈마에서 방출된 빛의 흡수. 이중 식각을 위한 기판 바이어스에 의해서 주로 결정되는 이온 충돌 에너지와 잠열의 방출이 300 mm wafer용 유도 결합 플라즈마 식각 장치에서 소스 전력과 바이어스 전력에 따라서 어떻게 변화하는지 전산 유체 역학 모사 프로그램인 CFD-ACE를 이용하여 상용 식각 장비인 AMAT사의 DPS II를 대상으로 온도 분포의 변화를 계산하였다. 실험 결과와 비교를 위하여 다섯 곳에(상, 하, 좌, 우, 중심) 열전대를 부착한 온도 측정 웨이퍼를 기판의 위치에 설치하고 여러 가지 실험 조건에 대해서 온도의 변화를 측정하였다. Ar 10 mTorr에서 2열 병렬 안테나의 전력을 300 W에서 시간에 따른 온도의 변화를 측정하였다. 이때 wafer의 평균 온도는 $28.9^{\circ}C$에서 $150^{\circ}C$까지 12분 내에 상승하였으며 최고 온도에 도달한 다음에는 거의 일정하게 유지 되었다. Si의 식각에서 온도의 영향을 가장 크게 받는 반응은 F 라디칼에 의한 Si의 직접 식각이며 Arrhenius 식의 형태로 표현하면 0.116*exp (-1250/T)의 형태로 된다. 문헌에 보고된 계수를 이용해서 $29^{\circ}C$의 식각 속도와 플라즈마에 의한 가열 최고 온도인 $150^{\circ}C$ 때의 값을 비교해보면 3.3배의 차이가 난다. 따라서 4%내의 식각 균일도를 목표로 하는 폴리 실리콘 게이트 식각 장비의 설계에서는 플라즈마에 의한 가열 불균일을 상쇄 할 수 있는 히터와 냉각 구조의 최적 설계가 필요하다.

• Journal of ILASS-Korea
• /
• v.19 no.2
• /
• pp.55-63
• /
• 2014

Pyrolysis oil (PO), also known as Bio crude oil (BCO), has the potential to displace significant amounts of fuels that are currently derived from petroleum sources. PO has been regarded as an alternative fuel for petroleum fuels to be used in diesel engine. However, the use of PO in a diesel engine requires modifications due to low energy density, high water contents, low acidity, and high viscosity of the PO. One of the easiest way to adopt PO to diesel engine without modifications is emulsification of PO with the fuels that has higher cetane number. However, PO that has high amount of polar chemicals is immiscible with non polar hydrocarbons of diesel. Thus, to stabilize a homogeneous phase of diesel-PO blends, a proper surfactant should be used. In this study, a DI diesel engine operated with diesel and diesel-PO emulsions was experimentally investigated. Performance and gaseous & particle emission characteristics of a diesel engine fuelled by diesel-PO emulsions were examined. Results showed that stable engine operation was possible with the emulsions and engine output power was comparable to diesel operation.

• Journal of Wetlands Research
• /
• v.11 no.2
• /
• pp.89-98
• /
• 2009

This study determines the stream mean slope, stream slope and longitudinal stream profile based on the concept of informational entropy. Maximizing the entropy will make the probability distribution of longitudinal stream profile as uniform as possible while satisfying the constraints. Using this relationships the mean stream slope, stream slope and longitudinal stream profile formulas were derived. The parameters of the applied streams were estimated by the least square method using the geomorphological factors of Dalchon stream basin obtained from Chungcheong Buk-Do local stream consolidation scheme drawings. The comparative investigation was performed between the observed and simulated mean stream slope and longitudinal stream profile, and are in good agreement with the measured data. It is noted that this results can be used in the estimation of stream mean slope and longitudinal stream profile.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.12
• /
• pp.1366-1381
• /
• 1991

The error rate equation of QPSK signal received through m-distribution fading channel in tone interference and Gaussian noise environments has been derived and evaluated numerically to be shown in figures. The derivation has been done for two cases. The one case is that only the signal is under the influence of fading and the another case is that signal and interference are under the influence of fading simultaneously. The evaluated results show that the error that performance when fading influences signal and interference simultaneously is worse than that when fading influence signal only. Also the results show that a late amount of improvement can be gained by direct sequence spread spectrum system and the amount of improvement becomes small as the influence of interference and fading becomes small.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.32-38
• /
• 2004

To evaluate the durability of direct injection diesel engine using biodiesel fuel, a small D. I. diesel engine was operated on a blend(BDF 20) of 20％ biodiesel fuel and 80％ diesel fuel for 200 hours. Engine dynamometer test was performed at a load of 90％ and a speed of 1900 rpm to monitor the engine performance and exhaust emissions. Engine performance parameters and exhaust emissions were sampled at 1 hour interval for analysis. The combustion maximum pressure and the crank angle at this maximum pressure as a combustion variation factor were considered to study the combustion characteristics of BDF 20 in diesel engine during durability test. As the results, the standard deviations and errors of combustion variation factors on BDF 20 were very little and combustion characteristics were very stable during the durability test. BDF 20 resulted in lower emissions of carbon monoxide, carbon dioxide, and smoke emissions with special increase of nitrogen oxides compared to diesel fuel. There was no also unusual change in engine oil composition from using BDF 20. Most of engine parts were clean and showed little wear, but soots were detected around the hole of fuel injector when BDF 20 was used in direct injection diesel engine for 200 hours.

• Journal of Korea Water Resources Association
• /
• v.38 no.6 s.155
• /
• pp.429-438
• /
• 2005

In this study, a couple of ordinary differential equations which can describe random waves are derived from the Boussinesq equations. Incident random waves are generated by using the TMA(TEXEL storm, MARSEN, ARSLOE) shallow-water spectrum. The governing equations are integrated with the 4-th order Runge-Kutta method. By using newly derived wave equations, nonlinear energy interaction of propagating waves in constant depth is studied. The characteristics of random waves propagate over a sinusoidally varying topography lying on a sloping beach are also investigated numerically. Transmission and reflection of random waves are considerably affected by nonlinearity.