• Journal of the Korean Geotechnical Society
• /
• v.32 no.7
• /
• pp.35-45
• /
• 2016

Estimation of vertical bearing capacity is critical in the design of bucket foundation used to support offshore structure. Empirical formula and closed form solutions for bucket foundations in uniform sand or clay profiles have been extensively studied. However, the vertical bearing capacity of bucket foundations in alternating layers of sand overlying clay is not well defined. We performed a series of two-dimensional axisymmetric finite element analyses on bucket foundations in sand overlying clay soil, using elasto-plastic soil model. The load transfer mechanism is investigated for various conditions. Performing the parametric study for the friction angles, undrained shear strengths, thickness of sand layer, and aspect ratios of foundation, we present the predictive charts for determining the vertical bearing capacities of bucket foundations in sand overlying clay layer. In addition, after comparing with the finite element analysis results, it is found that linear interpolation between the design charts give acceptable values in these ranges of parameters.

• Journal of the Korean Geosynthetics Society
• /
• v.3 no.4
• /
• pp.41-48
• /
• 2004

Recently a method for increasing the bearing capacity by laying the reinforcing materials with three or four layers as a method reinforcing the ground was studied recently. The purpose of this study is to examine the method for increasing shear-strength factor of the ground by reinforcing the ground under the foundation. According a method of wrapping ground with bakk-shape or semicircle-shape by geotextile was developed in this study and it looks likes anaspect that spreading footing exits under spread footing. A simulation loading-test using Aluminum sticks was carried out in order to examine the mechanism about bearing capacity of spread footing reinforced by geotextile. Increase of ultimate bearing capacity was verified in this simulation loading-test when charging loads to spread footing, which is propose from this study, reinforced by geotextile. And moving directions of points of the ground were also checked by grid-type indication method, and the areas where plastic failure appeared were checked by B-shutter photographing.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.161-170
• /
• 2022

The maintenance of bridges installed in rivers is carried out through facility safety inspection and repair & reinforcement procedures according to the results. Many studies have been so far conducted on the safety check of the bridge upperstructure because of the ease of access. However as it is impossible to directly investigate whether the pier foundation installed in the river has been scoured. Management of underwater foundations has remained based on theory. In this study, the scour of the bridge foundation installed in such a river was realized in 3D form by using an echo sounder and VRS. This made it possible to predict the scour pattern through comparison and analysis with the ground height of the riverbed at the time of the bridge installation. Based on these results, if the pier foundation is used as an initial data to determine whether or not local scour is present and to predict long-term scouring, bridge collapse due to foundation scour can be prevented.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.491-491
• /
• 2023

환경기초시설은 인간의 활동으로 인하여 발생하는 오염물질에 대한 적극적인 대응시설이다. 이는 환경기초시설로 유입되는 오염물의 경우 농도와 양적인 측면에서 부하가 상당히 크다는 것을 알 수 있으며 이러한 오염물질들이 제대로 처리되지 못하면 심각한 환경오염문제를 초래함은 자명한 사실이다. 환경기초시설 중 하폐수처리장은 수계관리에 있어 대표적인 점오염원으로 해당 방류수역의 적절한 수질을 유지하기 위해 하폐수처리장의 방류수는 수질기준을 엄격하게 준수함을 넘어 수질기준보다 훨씬 낮은 수준으로 방류수의 농도를 유지함이 바람직하다. 재난 등으로 인하여 이러한 하폐수처리장의 정상운영에 문제가 발생하였을 때 해당 방류수역에 심각한 영향을 주게 된다. 실제 경주 및 포항지진, 태풍 매미 등 자연재해로 인한 하폐수처리장의 피해가 다수 발생하여 해당 방류수역에 많은 영향을 미쳤을 것으로 추정되나 과거 피해를 입은 환경기초시설의 경우 시설 자체에 대한 피해정도나 복구상황에 대한 조사 및 후속보고는 있었으나 하페수처리장의 기능상실에 따른 해당 수역의 오염정도나 피해에 대한 보고는 없었다. 이는 하폐수처리장의 기능상실이 해당 수역에 미치는 영향을 정확하게 파악하지 못함으로 실질적인 피해 정도를 가늠할 수 없게 만들었을 뿐만 아니라 향후 비슷한 피해가 발생하였을 때 어떠한 대처가 필요한지에 대한 계획수립에 도움을 줄 수 없게 되는 결과를 초래하였다. 본 연구에서는 폐수처리시설이 여러변수에 의해 피해를 입어 정상적인 가동이 어려운 상황이 발생하여 유입수가 처리되지 않고 방류되었을 때 방류수역에 미치는 영향을 모의하였다. 낙동강으로 처리수를 직접 방류하는 달성2차 산업단지 폐수처리장을 대상으로 모의를 진행하였고 모의결과는 하폐수처리장의 미처리수 방류에 있어 가장 중요한 점은 방류수의 수질상태 보다는 유량이었음을 알 수 있었다. 본 연구의 결과는 하폐수처리장의 기능상실에 따른 피해정도를 가늠함으로 향후 하폐수처리장의 기능상실에 대처할 수 있는 적절한 대응대책 수립에 기초적인 자료를 제공할 것으로 기대된다.

• Clean Technology
• /
• v.10 no.1
• /
• pp.9-17
• /
• 2004

Direct methanol fuel cell(DMFC) with proton exchange membrane (PEM) has advantages over the conventional power source (e.g. vehicle). DMFC, however, has a problem to be solved such as methanol crossover, high anodic overpotential and limiting current density, etc. The physicochemical phenomena in DMFC can be described by coupled PDEs (partial differential equations), which can be solved by a PDE solver. In this paper, we utilized a commercial software FEMLAB to solve the PDEs. The FEMLAB is one of the software programs available which are developed as a solver for building physics problems based on PDEs and is designed to simulate systems of coupled PDEs which may be 1D, 2D, 3D, non-liner and time dependent. We performed simulation using the Tafel equation as an electrochemical reaction model to analyze methanol concentration profile in DMFC system. We confirm that the rapid decrease of methanol concentration at anodic catalyst layer with the increase of the current density is a main reason of the low performance in DMFC through simulation results.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.166-174
• /
• 2015

A direct demand model requires relatively little analysis time and incurs a low cost. It is also known to be useful for the preliminary screening of promising configurations or concepts. This study reviews direct demand models of 12 existing urban railways using demographic data based on a block group level which is approximately 1/24 of a traditional zone area. However, direct demand models are limited. Therefore, a new approach is suggested. The proposed method is based on a field study and an empirical analysis. The study finds factors that affect ridership at the station level. As a case study, the proposed approach is tested using 54 light railway transit stations. The results of this empirical study demonstrate its applicability to improve the error rates of the predicted ridership at the station level.

• Journal of the Korean association of regional geographers
• /
• v.20 no.2
• /
• pp.153-162
• /
• 2014

This Research is to study types and distribution for place name of migration derived from Korea Peninsula by analyzing villages name of the Yanbian Korean Autonomous Prefecture. Village names of Yanbian Korean were identified as 945 out of 2,015. Place name migrated from Korea Peninsula was turned out 51 villages. Up to the present time in the Transition of China, 34 place names were disappeared, maintained place names were 16, and rehabilitated place name after loss was 1. The place name by naming method were classified as small area directed migration, large area directed migration, and merged migration. In case of small area directed migration, origin and destination is same such as Jeongeup and Muju, Cheonbuk, large area directed migration is named case by region migrants like a Gangwonchon named by people moved from GanwonDo, and merged case combine initials with each village names in case of GilseongChon by colligated Gilju and Seokseongmyeon. The results will be expected to support research information for identity and ethnical migration process.

• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.12-19
• /
• 2014

To minimize the risk of corrosion on buried pipeline and to maximize the efficiency of cathodic protection, various indirect inspection techniques have been used for decades. In the United States, 49 CFR has regulated the external corrosion direct assessment for buried pipelines. In Korea, there is no provision for external corrosion direct assessment but there is only, according to the KGS Code, provision that if the survey of the defects of buried pipeline and the leakage test for the pipe were conducted, it is deemed to leakage inspection. We, therefore, have suggested external corrosion direct assessment method appropriate to domestic status through the survey of the regulations and standards of UK and the USA and the investigation of domestic situation on coating damage detection method. The proposed external corrosion direct evaluation method was used as the basis when introducing the precision safety diagnosis regulation for the medium-pressure pipe in Korea.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.197-200
• /
• 2007

항공사진 원데이터의 변형을 방지하고 효율적인 관리를 위해서는 자동독취를 통한 수치화 방안이 마련되어야 한다. 항공사진 판독업무에 있어서 기존 판독자만 밀착항공사진과 입체경을 통하여 건축물의 형태와 변화 여부를 판단하던 것을 모니터 상에서 누구나 건물의 변동사항을 볼 수 있도록 효율적인 판독시스템을 구축하여 판독의 신뢰도를 높여야 한다. 판독시스템 구축은 디지털 영상의 다양한 활용과 업무의 효율성 확보 및 대민서비스 향상 차원에서 이루어져야 할 것이다. 또한 현재 외국의 항측사들이 실제로 활용하고 있으며 조만간 국내에서도 도입 예정인 디지털항공카메라는 항공사진의 수치화 단계를 거치치 않고 직접 수치항공영상을 취득 할 수 있으므로 수치화 과정에서 발생하는 많은 오류들을 제거할 수 있음은 물론 판독시스템을 활용한 데이터의 직접처리가 가능해 시간적, 경제적으로 많은 장점들을 가지고 있다. 그러므로 디지털항공카메라의 도입에 대비한 개발현황과 활용도 등에 관한 사전 연구가 수행되어야 한다. 본 연구에서는 사용자가 직접 입체 판독 및 분석을 수행할 수 있는 플랫폼을 구비함으로서 오류를 최소화 할 수 있도록 편광 모니터(Z-Screen)를 사용하여 수행하였다. 또한 환경은 Microsoft Window OS 환경 상에서 구동될 수 있도록 개발함으로서 시스템의 범용적 사용을 위한 기초 환경을 제공하도록 제안하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.1-8
• /
• 2006

One of the most important subjects to develop a LPDi engine is to suppress the bubble generated inside the liquid LPG direct injector. For the purpose of this, the analogy visualization injector to visualize the generation and behaviors of bubble is manufactured, and the bubbling phenomenon and behaviors of bubble are visualized and investigated according to the change of the temperature around an injector wall, fuel pressure and a needle configuration. As results, it was found that the bubble inside the injector is generated around an injector hole and after rising by buoyancy it disappears around the top of a nozzle. The number of bubbles generated is little changed regardless of the lapse of time but it remarkably increases as the temperature around the injector increases. Also, it was known that as the sac volume in LPDi injector decreases the generation of bubble is more active and the rising velocity of bubble generated is increased.