• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.1
• /
• pp.17-24
• /
• 2014

In this paper, we analysed coupling coefficient between dielectric resonator of high dielectric constant and microstrip line to design for low phase noise dielectric resonator by direct coupling. Also we analysed phase noise of dielectric resonance oscillator with parallel feedback circuit to complement Q by high dielectric constant. We obtained a result from high-stability dielectric oscillator which is optimum designed through analysis of dielectric resonance oscillator phase noise and coupling coefficient. The result is that the phase noise was -83.3dBc/Hz@1KHz at 20.25GHz when we used about 3.6 coupling coefficient and ${\epsilon}_r$=30 dielectric resonator of 20.25GHz dielectric resonance oscillator. As a result, we suggested the direct-connect design method by frequency multiplication mode to prevent phase noise loss at K-Band.

• Journal of Adhesion and Interface
• /
• v.1 no.1
• /
• pp.30-37
• /
• 2000

This study focused on the direct blending of bonding agents (resorcinol, hexamethylenetetramine, NaOH) into rubber compound to simplify the composite manufacturing process. The mechanism of direct blending system was studied by comparing the following two cases. The one is direct blending of bonding agents into rubber compound and then allows the reaction (Case I). The other is mixing of reactant obtained by reaction of bonding agents (Case II). According to the morphology analysis, the Case II showed the clean interfacial area between bonding agents and matrix rubber, while the Case I created the new interphase under proper processing condition. Also, the optimum adhesion strength between SBR and nylon cord could be obtained with bonding agents whose molar ratios of resprcinol/hexamethylenetetramine was 1.2/1 in the recipes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.177-184
• /
• 2020

Purpose: The purpose of this study was to compare and evaluate the tensile bond strength of chairside reline resin to denture base resin fabricated by different methods (subtractive manufacturing, additive manufacturing, and conventional heat-curing). Materials and methods: Denture base specimens were fabricated as cuboid specimens with a width of 25 mm × length 25 mm × height 3 mm by subtractive manufacturing (VITA VIONIC BASE), additive manufacturing (NextDent Base) and conventional heat-curing (Lucitone 199). After storing the specimens in distilled water at 37℃ for 30 days and drying them, they were relined with polyethyl methacrylate (PEMA) chairside reline resin (REBASE II Normal). The subtractive and additive manufacturing groups were set as the experimental group, and the heat-curing group was set as the control group. Ten specimens were prepared for each group. After storing all bound specimens in distilled water at 37℃ for 24 hours, the tensile bond strength between denture bases and chairside reline resin was measured by a universal testing machine at a crosshead speed of 10 mm/min. The fracture pattern of each specimen was analyzed and classified into adhesive failure, cohesive failure, and mixed failure. Tensile bond strength, according to the fabrication method, was analyzed by 1-way ANOVA and Bonferroni's method (α=.05). Results: Mean tensile bond strength of the heat-curing group (2.45 ± 0.39 MPa) and subtractive manufacturing group (2.33 ± 0.39 MPa) had no significant difference (P>.999). The additive manufacturing group showed significantly lower tensile bond strength (1.23 ± 0.36 MPa) compared to the other groups (P<.001). Most specimens of heat-curing and subtractive manufacturing groups had mixed failure, but mixed failure and adhesive failure showed the same frequency in additive manufacturing group. Conclusion: The mean tensile bond strength of the subtractive manufacturing group was not significantly different from the heat-curing group. The additive manufacturing group showed significantly lower mean tensile bond strength than the other two groups.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.654-656
• /
• 1997

본 논문에서는 직접신경회로망제어기(DNNC)를 사용하여 결합된 PI제어기의 이득을 구하여 보일러 터빈시스템을 제어하고자 한다. 직접신경회로망제어기는 플랜트의 동특성을 학습시키는 에뮬레이터 없이 제어입력에 대한 플랜트의 동작방향에 대한 정보만을 사용하여 신경회로망을 학습시키고, 이 신경회로망을 사용하여 제어대상 플랜트인 다중입출력플랜트를 제어하기 위하여 결합된 PI 제어기의 이득을 구한다. 컴퓨터 시뮬레이션을 통하여 제안한 알고리즘의 타당성을 입증하고자 한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.639-647
• /
• 2007

This paper proposed the novel method that can realize the parallel coupled line(PCL) band-pass filter with directly coupled feeding structure by means of transforming the first and last PCL sections of the conventional PCL band-pass filter into K-inverters, then substituting T-type equivalence for K-inverter. The proposed method supplies simple design formulae and can considerably reduce time and efforts needed to optimize filter performance when compared to reported methods using external Q or equivalent parameters. On the basis of the proposed method, the band-pass filter using directly coupled feeding structure and having 18% fractional bandwidth was designed and fabricated. The validity of proposed method was proven by the measured result.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1995.06a
• /
• pp.640-643
• /
• 1995

• The Journal of the Korea Contents Association
• /
• v.10 no.10
• /
• pp.172-179
• /
• 2010

The study on works motivated from interest in the nature of matters and inherent visual-perceptual structure in them aims at expressing formative continuity of the connections of three dimensions of simple geometrical shapes such as circles and lines, which are characteristics of shape of molecules. With such a purpose, this study examined the geometrical shapes in modern arts and structural connection and symbolism of molecule structure, and based on such considerations, it expressed successive formative beauty which comes from repetitive connection between units by creating stereogram of simple geometrical shapes of molecule structure. The types of works include a method of connecting the units of molecule models and molecules seen in electron microscope with lines as a parameter and connecting units directly, which are used to express body accessory and metallic sculptures. Consequently, it attempted formation occurring spatial composition of continuity of division and duplication through direct connection between units and circular continuity coming from connection of simple geometrical shapes of molecule images such as spheres and curves transformed into stereogram.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.227-238
• /
• 1997

다목적함수 최적화를 효과적으로 수행하기 위하여 유전자 알고리즘과 직접탐색법을 결합하여 혼성형 최적화기법을 구현하였다. 이 방법은 유전자 알고리즘을 사용하여 최적점이 존재할 가능성이 높은 영역을 탐색한 후, 이 영역에서 직접탐색법을 사용하여 최종해를 찾는다. 따라서 탐색의 효율을 향상시키고 계산시간을 절약할 수 있는 장점이 있다. 그러나 최적화기법이 효율적이지만, 최적화기법을 사용하기 위해서는 전문가의 전문지식이 필요하다. 따라서 실제 최적화를 수행하기 위해서는 관련 분야의 전문지식과 최적화기법이 효율적으로 결합되는 것이 필요하다.

• Asia Marketing Journal
• /
• v.1 no.2
• /
• pp.19-35
• /
• 1999

데이터베이스 마케팅 전략을 수립하고 집행함에 있어서 고객에게 접근하기 위한 촉진 매체로써 직접우편(Direct Mail)과 텔레 마케팅 등의 직접반응매체를 주요 수단으로 하는 경우 이를 다이렉트 마케팅이라고 한다. 다른 마케팅 전략들과 마찬가지로 다이렉트 마케팅에서도 마케팅 자원이 효과적으로 사용될 수 있도록 고객 데이터베이스를 세분화하는 작업을 수행한다. 리스펀스 모델링(Response Modeling)은 다이렉트 마케팅분야에서 고객리스트를 세분화하고 각 세그멘트별로 고객의 반응(구매행위)을 예측하는 기법을 말하며 RFM(Recency, Frequency, Monetary), 로지스틱, 신경망은 리스펀스 모델링을 위해서 가장 널리 사용되고 있는 기법이다. 과거에 이들 방법은 고객 데이터베이스 전체에 단독 모델로 적용되어 왔으나 이러한 단독 모델을 고객 데이터베이스에 적용하는 것이 정당화 되려면 고객들이 동일한 방식으로 반응한다는 전제가 필요하다. 그러나 일반적으로 고객의 반응방식에는 상당한 이질성이 존재한다. 예컨대 직업, 나이, 소득, 성별 등이 같다고 해서 같은 구매패턴을 보이지는 않는다는 것이다. 즉 고객A의 구매행위는 회귀선에 의해서 잘 설명되는 반면에 고객B는 신경망이나 RFM으로 잘 설명될 수 있는 경우가 존재하는 것이다. 이러한 구매행위의 이질성을 반영하기 위해서 최근에는 두개 이상의 방법을 결합하여 사용하는 결합 리스펀스 모델링 방법도 시도 되어 왔다. 그러나 결합 리스펀스 모델링에 관한 기존 연구들은 상관관계가 낮은 모델들을 결합함으로써 세분화의 효과를 단독 모델을 사용할 때 보다 개선할 수 있다고는 하였으나 구체적으로 어떤 모델들이 서로 낮은 상관관계를 갖는지는 보여주지 못하였다. 본 논문에서는 RFM 방법을 모델 내에서 사용하는 변수와 이를 이용한 모델링 방법상의 차이로 인하여 다른 두 방법(로지스틱, 신경망)과 매우 낮은 상관관계를 갖는 방법으로 제시하고 RFM과 다른 두 방법간의 낮은 상관관계를 이용하여 결합하는 경우 모델의 예측효과를 상당히 개선할 수 있음을 사례분석을 통해서 보이고자 한다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.11-20
• /
• 1999

We have designed and fabricated direct-and gap-coupled microstrip hairpin-comb filters by patterning double-sided YBCO films on a single 50-mm-diameter, 0.5-mm-thick $LaAlO_3$ wafer. Both filters have a center frequency at 1.773 GHz, 12 MHz bandwidth, 0.5 dB minimum insertion loss in the passband, and very strong out-of- band rejection. Due to two attenuation poles below and above the passband, the direct-coupled hairpin-comb filter showed a better skirt characteristic than the gapcoupled hairpin-comb filter which had only one attenuation pole below the passband.