• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.1
• /
• pp.127-136
• /
• 2006

Shaded relief is used in the analysis of digital terrain model, but accurate shadow zone has not been affirmed on account of idea only shadow of terrain that would be in shadow are shaded. This study is to analyze each display difference of a digital terrain model by grasping the shadow characteristics of terrain and comparing shaded relief function used terrain display of GIS with a rendering technique. After terrain with road in subject area is selected and created to digital terrain model of TIN, shaded relief and rendering according to altitude and azimuth of the sun at 9:00 am and 3:00 pm is applied. As the results, only backward portions of the terrain that is in shadow from the sunlight are shaded in case of shaded relief. The rendering created the shadow, which is cast by terrain features. By these mutual comparison, this study represented data for understanding of shaded relief. And it is expected that the rendering method could be used to analyze sunshine influence.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.10a
• /
• pp.195-199
• /
• 2002

SAR(Synthetic Aperture Radar) 영상은 경사촬영을 수행하므로 지형의 기복에 따른 영향을 많이 받는다. 따라서 SAR영상을 이용하여 여러 가지 정보들을 추출하여 이용하기 위해서는 전처리 과정으로서 지형의 기복에 따른 여러 가지 왜곡들을 보정해야 한다. 이에 본 연구에서는 RADARSAT SAR 영상을 이용하여 궤도모델링, 정사보정을 수행하고 역산란계수, 국부입사각 계산 등을 통해 지형기복에 따른 방사왜곡보정을 수행하였다.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.51-57
• /
• 2002

국내에서 활발하게 연구되고 있는 위성영상을 이용한 원격탐사는 매핑, 환경관리, 시설물 관리 등에 이용되어 왔다. 본 연구에서는 날씨나 태양의 제약을 받지 않는 RADARSAT SAR 영상의 수계지역을 신경망 기법을 이용하여 분류하고자 하였다. RADARSAT은 경사관측을 통하여 영상을 취득하며 지형의 기복에 의한 음영효과(Shadow effect)로 인하여 수계지역 분류시 정확도를 감소시킨다. 이러한 문제를 해결하기 위해서 본 연구에서는 RADARSAT SAR 영상의 역산란계수를 계산하고 음영효과에 의한 분류오류를 감소시키기 위하여 수치고도모형을 사용하였다. 지형의 기복이 작은 평지와 지형의 기복이 심한 산악지로 나누어 연구를 수행하여 각 지역별로 분류 정확도를 평가하였다. 연구결과로 역산란계수를 신경망기법의 단일 입력 자료로 사용한 경우보다 수치고도모형을 같이 사용한 것이 분류 정확도가 높았다. 또한, 수치고도모형을 역산란계수와 함께 입력 자료로 이용할 경우 평지보다 산악지에서 효율적이었다. 산악지역이 많은 국내에서는 SAR영상의 수계지역 추출을 신경망 기법으로 할 경우에는 수치고도모형을 함께 이용함으로써 분류정확도 향상을 시킬 수 있다고 사료된다.

• Journal of The Geomorphological Association of Korea
• /
• v.21 no.4
• /
• pp.1-17
• /
• 2014

This study analyzed characteristics of landform relieves on 12 bedrock whole(W) areas and 24 mountain(M) and valley(V) areas. Based on this result, characteristics and relations between bedrocks and landform relief were classified as follows. 1) gneiss-height M and granite-height W, M, V areas show active stream incision for uplift. However these areas have relatively low relief and grade compared to high altitude, because effect of denudation don't pass on whole slope. 2) gneiss-height W, V, gneiss-mid M, schist M, granite-mid M, volcanic rock W, M, sedimentary rock-height(conglomerate) W, M, V, sedimentary rock-mid (sandstone and shale) M, limestone W, M areas have active stream erosion and mass movement, but landform relieves are on the high side, because these have resistant bedrock and geological structure against weathering and erosion. 3) gneiss-mid W, V, schist W, V, granite-mid W, V, volcanic rock V, sedimentary rock-mid W, V, sedimentary rock-low(shale) M, limestone V areas landform relieves are on the low side, because these have weak resistance and active weathering, mass movement, erosion, transportation and deposit. 4) gneiss-low W, M, V, granite-low W, M, V, sedimentary rock-low W, V areas landform relieves are very low, because these don't have active erosion and mass movement as costal area with low altitude.

• Journal of the Korean Geographical Society
• /
• v.42
• /
• pp.13-22
• /
• 1990

본 연구의 목적은 현대지형학의 동향이 지형의 정량적.동적 이해에 있으므로 구릉지 지형의 기복량을 측정하여 구릉지의 개석도 또는 단계(stage)를 정량적으로 표현하려는 데 있다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.299-302
• /
• 2004

최근에 상용화되어 있는 영상 중 가장 고해상도인 ikonos 영상은 공간해상도가 높기 때문에 더 많은 지형지물 정보를 포함하고 있다. 그러나 이러한 커다란 장점과 더불어 고층건물이나 높은 표고의 지형에서 발생하는 기복변위 보정이라는 소축척 영상에서 볼 수 없었던 새로운 문제가 등장하였다. 특히, 이러한 고해상도 영상들은 산악지역에서 식생에 대한 세밀한 정보를 제공하지만 상대적으로 높은 고도를 가지고 있기 때문에 발생하는 기복왜곡과 그림자 효과가 자료의 이용에 제한요인으로 작용하게 된다. 본 연구에서는 ikonos 고유의 센서정보와 수치지형도를 통하여 획득한 DEM(수치표고모델)을 이용하여 정밀편위보정방법(Difference rectification method) 방법에 의해 기하보정을 수행하고 그 결과 발생하는 산악지역에서는 기복변위를 분석하였다.

• Geophysics and Geophysical Exploration
• /
• v.2 no.4
• /
• pp.191-201
• /
• 1999

The interpretation of resistivity data has, so far, mainly been made under the assumption that the earth is of relatively simple structure and then using one or two-dimensional inversion scheme. Since real earth structure and topography are fully three-dimensional and very complicated In nature, however, such assumptions often lead to misinterpretation of the earth structures. In such situations, three-dimensional inversion is probably the only way to get correct image of the earth. In this study, we have developed a three-dimensional inversion code using the finite element solution for the forward problem. The forward modeling algorithm simulates the real field situation with irregular topography. The inverse problem is solved iteratively using the least-squares method with smoothness constraint. Our inversion scheme employs ACB (Active Constraint Balancing) to enhance the resolving power of the inversion. Including Irregular surface topography in the inversion, we can accurately define the earth structures without artifact in the numerical tests. We could get reasonable image of earth structure by Inverting the real field data sets taken over highway bridge construction site.

• Journal of The Geomorphological Association of Korea
• /
• v.17 no.1
• /
• pp.1-14
• /
• 2010

This paper deals with the classification and distribution of geomorphic surfaces and analysis on effects of geomorphic processes on the landforms in the inaccessable DMZ (Demilitarized Zone) to Wonsan Bay of East Sea coast of Chugaryeong Rift Valley, Central Korea. DEM (Digital Elevation Model) and Landsat images are used for the above anlaysis. The geomorphic surfaces are classified by TPI (Topographical Position Index) for the analysis of the convexity and concavity calculated using topographical elements such as elevation, steepness, and relief. In the Chugayreong Valley, 10 geomorphic surfaces are classified as steep valley, shallow valley, upland drainage, U-shaped valley, plain, open slope, upper slope, local ridge, midslope ridge, and high ridge. Zonal Statistics presents average characteristics of geomorphological processes of surfaces by the relationships between bedrock and relief, surface and relief, and between surface and NDVI. So, these analysis can help to understand geomorphological process such as dissection of lava plateau and watershed divide evolution.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.21-28
• /
• 2004

Three-dimensional (3-D) resistivity inversion including a topographic effect can be considered theoretically to be the technique of acquiring the most accurate image in the interpretation of resistivity data, because it includes characteristic image that the actual subsurface structure is 3-D. In this study, a finite-element method was used as the numerical method in modeling, and the efficiency of Jacobian calculation has been maximized with sensitivity analysis for the destination block in inversion process. Also, during the iterative inversion, the resolution of inversion can be improved with the method of selecting the optimal value of Lagrange multiplier yielding minimum RMS(root mean square) error in the parabolic equation. In this paper, we present synthetic examples to compare the difference between the case which has the toprographic effect and the other case which has not the effect in the inversion process.

• Spatial Information Research
• /
• v.16 no.1
• /
• pp.19-32
• /
• 2008

Usually in South Korea, land cover type and topographic undulation are frequently changed even in a narrow area. However, most of researches using aerial LIDAR(LIght Detection And Ranging) data in abroad had been acquired in the study areas to be changed infrequently. This research was performed to explore reconstruction methodologies of 3D surface models considering the distribution of land cover type and topographic undulation. Composed of variously undulatory forests, rocky river beds and man-made land cover such as streets, trees, buildings, parking lots and so on, an area was selected for the research. First of all, the area was divided into three zones based on land cover type and topographic undulation using its aerial ortho-photo. Then, aerial LIDAR data was clipped by each zone and different 3D modeling processes were applied to each clipped data before integration of each models and reconstruction of overall model. These kinds of processes might be effectively applied to landscape management, forest inventory and digital map composition. Besides, they would be useful to resolve less- or over-extracted problems caused by simple rectangle zoning when an usual data processing of aerial LIDAR.